View cart “Sonoscape E2 Ultrasound Machine” has been added to your cart.

SV-Multisensor2_01

Health Education / Medical Equipment

OXYGEN & CARBON DIOXIDE MONITOR

Brands: Analox

~~$0.00~~

Shipped From Abroad

Key Features

Operating temperature 0 °C to 40 °C (32 °F to 104 °F)
Dual state-of-the-art oxygen and carbon dioxide sensors
Two analogue outputs, one for each gas detected
Maximum power consumption less than 5 watts
Designed to operate safely in a vacuum for four hours

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Sku:

SF1033560130141-12

Brands:: Analox

Description
Reviews (0)

Description

Description

The SV-Multigas-2 is a dual oxygen (O2) and carbon dioxide (CO2) monitor designed for vehicles operating in the upper atmosphere. Housed in a robust, compact enclosure, the unit is ideal for use in airborne delivery systems, satellites and aircraft cabins. Since 2014 the SV-Multigas-2 has been successfully used in rockets travelling to outer space.

Flexibility

The SV-Multigas-2 incorporates user maintainable analogue sensors that provide a 1 to 5 V output. This modular approach to gas monitoring ensures that our customers have the flexibility to integrate the unit into their own system. It can be either installed directly in the gas path or used for general air monitoring.

Technical Specification

SV-Multigas-2

Operating temperature range	32 to 104 °F / 0 to 40 °C
Storage temperature range	−4 to 140 °F / −20 to 60 °C
Operating pressure range	8.7 to 17.4 psia / 600 mbar to 1200 mbara
Vacuum tolerance	normal operation of the SV-Multigas-2 will not be affected by 4 hour exposure to vacuum
Electrical supply	18 to 36 V DC, 100 mV ripple maximum
Power consumption	5 W maximum
2 analogue outputs are provided, one for each gas	Zero output: 1.0 V, full-scale output: 5.0 V, warm-up/fault output: 0.25 V Outputs are isolated from the incoming power supply and from each other

O2 SENSOR

Range	0 to 5.80 psi pO2 / 0 to 400 mbar
Repeatability @ 14.5 psia, 70 °F / 1000 mbara, 21 °C	± 0.116 psi pO2 / ± 8 mbar

CO2 SENSOR

Range	0 to 0.14 psi pCO2 / 0 to 10 mbar
Repeatability @ 14.5 psia, 70 °F / 1000 mbara, 21 °C	±(0.0014 psi pCO2 + 1.1% of reading) / ±(0.1 mbar + 1.1% of reading)

Click here to download Data Sheet

Reviews

There are no reviews yet.

Be the first to review “OXYGEN & CARBON DIOXIDE MONITOR”

Quick Comparison

Settings OXYGEN & CARBON DIOXIDE MONITOR remove Pilot-RO Water Purification System remove Atmosphere Protection Module remove VENUS SOLO OEM SENSOR remove Full Touch Screen Water Purification System remove Super-Full Touch Screen Water Purification System remove

Name OXYGEN & CARBON DIOXIDE MONITOR remove Pilot-RO Water Purification System remove Atmosphere Protection Module remove VENUS SOLO OEM SENSOR remove Full Touch Screen Water Purification System remove Super-Full Touch Screen Water Purification System remove

Image

SKU SF1033560130141-12 SF1033560130126-2 SF1033560130141-16 SF1033560130141-15 SF1033560130126-4 SF1033560130126-3

Rating

Price

~~$0.00~~

~~$0.00~~

~~$0.00~~

~~$0.00~~

~~$0.00~~

~~$0.00~~

Stock

Availability

Add to cart

Description

Shipped From Abroad

Key Features

Operating temperature 0 °C to 40 °C (32 °F to 104 °F)
Dual state-of-the-art oxygen and carbon dioxide sensors
Two analogue outputs, one for each gas detected
Maximum power consumption less than 5 watts
Designed to operate safely in a vacuum for four hours

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad An economical choice of primary pure water for daily laboratory cleaning , with a water output of 45 - 180 liters per hour, ion retention rate >98%, organic matter retention rate >99% (when MW >200 Daltons), particle and bacteria retention rate >99%, which can meet the requirements of conventional production process water and laboratory utensil cleaning water, and can be used as the inlet water for ultrapure water systems, high-pressure steam sterilizers, environmental test chambers and other instruments.

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad

Key Features

Flexible to meet your specific needs and ensures you meet current legislation
Measures up to 2 gasses with a choice of; O2 (oxygen), CO2 (carbon dioxide) and R134a (refrigerants). The APM will soon be able to measure VOCs (volatile organic compounds)
Uses MODBUS RTU communications protocol
Temperature compensated sensors with PressureSync technology
Fitted with 2 relays
Compatible with the Analox Distributed Atmosphere Monitoring solution (DAMS)

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad

Key Features

Single gas (user defined)
Backward compatible with ADC’s ‘Eclipse’
Linearised Output
Continuous status signal to check device health

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad The Center series uses city tap water as the water source, conveniently and quickly produces secondary RO reverse osmosis water, DI/EDI deionized water and UP ultrapure water. It adopts standard two-stage reverse osmosis system and EDI technology and modules*, and continuously produces Class II pure water with a TOC of more than 10MΩ.cm (25℃) and less than 30ppb*, and ultrapure water of 18.2MΩ.cm (25℃).There are currently four sub-product series of Center (Center-EDI) pure water and ultrapure water, and the system water output is: 45, 60, and 90 liters/hour.

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad The Super series uses city tap water as the water source, and can easily and quickly produce secondary RO (reverse osmosis) water, EDI deionized water and UP ultrapure water. It uses a standard two-stage reverse osmosis system and Ionpure EDI technology and modules to continuously produce Class II pure water with a TOC of more than 10MΩ.cm (25℃) and <30ppb, and ultrapure water of 18.2MΩ.cm (25℃). System water output: 10 liters/hour, and the daily output of pure water can reach 240 liters.

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Content

Description

The SV-Multigas-2 is a dual oxygen (O2) and carbon dioxide (CO2) monitor designed for vehicles operating in the upper atmosphere. Housed in a robust, compact enclosure, the unit is ideal for use in airborne delivery systems, satellites and aircraft cabins. Since 2014 the SV-Multigas-2 has been successfully used in rockets travelling to outer space. Flexibility The SV-Multigas-2 incorporates user maintainable analogue sensors that provide a 1 to 5 V output. This modular approach to gas monitoring ensures that our customers have the flexibility to integrate the unit into their own system. It can be either installed directly in the gas path or used for general air monitoring.

Technical Specification

SV-Multigas-2

Operating temperature range	32 to 104 °F / 0 to 40 °C
Storage temperature range	−4 to 140 °F / −20 to 60 °C
Operating pressure range	8.7 to 17.4 psia / 600 mbar to 1200 mbara
Vacuum tolerance	normal operation of the SV-Multigas-2 will not be affected by 4 hour exposure to vacuum
Electrical supply	18 to 36 V DC, 100 mV ripple maximum
Power consumption	5 W maximum
2 analogue outputs are provided, one for each gas	Zero output: 1.0 V, full-scale output: 5.0 V, warm-up/fault output: 0.25 V Outputs are isolated from the incoming power supply and from each other

O2 SENSOR

Range	0 to 5.80 psi pO2 / 0 to 400 mbar
Repeatability @ 14.5 psia, 70 °F / 1000 mbara, 21 °C	± 0.116 psi pO2 / ± 8 mbar

CO2 SENSOR

Range	0 to 0.14 psi pCO2 / 0 to 10 mbar
Repeatability @ 14.5 psia, 70 °F / 1000 mbara, 21 °C	±(0.0014 psi pCO2 + 1.1% of reading) / ±(0.1 mbar + 1.1% of reading)

Click here to download Data Sheet

An economical choice of primary pure water for daily laboratory cleaning , with a water output of 45 - 180 liters per hour, ion retention rate >98%, organic matter retention rate >99% (when MW >200 Daltons), particle and bacteria retention rate >99%, which can meet the requirements of conventional production process water and laboratory utensil cleaning water, and can be used as the inlet water for ultrapure water systems, high-pressure steam sterilizers, environmental test chambers and other instruments

Technical Parameters

Product Model	Pilot-RO45	Pilot-RO63	Pilot-RO90	Pilot-RO120	Pilot-RO180
Pure water output*	45L/Hour	63L/Hour	90L/Hour	120L/Hour	180L/Hour
RO reverse osmosis water indicators
Ion retention rate	98%-99% (when using new RO membrane)
Organic matter retention rate	>99%, when MW>200 Daltons
Particle and bacteria retention	>99%
bacteria	<0.01 cfu/ml (optional 0.2μm imported PES terminal filter)
Particles (>0.2μm)	<1/ml (optional (0.2μm imported PES terminal filter)
Raw water requirements	Urban drinking tap water, water temperature 5-45℃, water pressure 1.0-4.0Kgf/ ^cm2
Size and weight	Length × width × height: 640 × 540 × 1110mm; Weight: about 70Kg
Electrical requirements	220V, 50/Hz
power	120W	120W	240W	240W	240W
System Configuration	Main unit (including 1 set of purification column) + 2 built-in 15L pressure water buckets + TDS/conductivity test pen + accessory bag

Descriptions

The Analox APM (Atmosphere Protection Module) is a configurable modular system which has the ability to monitor up to 2 gasses. This unique solution can be used as a stand alone atmosphere monitor or it can be integrated into existing PMS systems.

Technical Specifications

System Specifications

Operating Temperature	0°C to +45°C +32°F to +113°F
Operating pressure	700 to 1300mBar
Humidity Range	0 to 95% RH
Power	24vDC (nominal) as standard
Communications	MODBUS RTU
Relays	2 as standard
Calibration interval	Before mission and / or every 3 months

Sensor Unit

Sensor type	Range	Danger
CO2	NDIR	0 to 5% / 0 to 30mBar	Toxic
O2 (Depleted)	Electrochemical	0 to 25% / 0 to 2500mBar	Asphyxiation
O2 (enriched)	Electrochemical	0 to 25% / 0 to 2500mBar	Fire/explosion
R134a	NDIR	0 to 1000ppm	Asphyxiation
VOCs	PID	0 to 20ppm	Toxic

Click here to download Data Sheet

Download Pumped Detectors Technical Manual

Description

The Venus Solo OEM sensor is a self-contained unit designed for integration into other manufacturers’ equipment and provides a measurement of gas concentration according to specific user requirements. These GFC (Gas Filter Correlation) sensors generate a signal proportional to the infrared absorption of the measured gas. Providing the gas concentration lies within the designed range of the sensor, the signal is periodically compared with a reference gas. Gas concentrations are indicated through the non-linearised analogue signal output. Gas connections to and from the sensor are via suitable fittings on the gas measuring cell. The Venus Solo OEM Series sensors electrical supply is designed to accept 24V DC (3amp max). Our Venus Solo OEM sensor uses GFC (Gas Filter Correlation) technology to give highly accurate gas measurements. The Venus Solo can be integrated into your own gas analyzer or management system and offers the user a 0-2.5v analogue output.

The sensor is currently available as either: Carbon dioxide (CO2), carbon monoxide (CO), nitrous oxide (N20), methane (CH4) or nitric oxide (NO). If your application requires a different gas, just let us know and we can customise it to your needs. The Venus Solo is used in Military applications to protect submariners from carbon monoxide (CO) exposure.

Technical Specification

Venus Solo

Operating Temperature Range	5°C to 40°C
Ambient Humidity	0 to 95% RH, non condensing
System Warm-up Time	30-60 minutes (dependant on gas)
Power Requirements	24V DC +/- 10%, Max current 3A, Nominal current 600mA (after warm up)
Outputs	4-20mA, RS232, relays
Response Time (T90)	Between 10-90 secs (dependant upon gas cell length) at flow rate of 500ml/minute
Intrinsic Accuracy	+/- 0.2% of full scale
Sensor Technology	Gas Filter Correlation

Gas PPM Ranges

Gas Type	10 PPM	20 PPM	50 PPM	100 PPM	200 PPM	500 PPM	1000 PPM	2000 PPM	5000 PPM
Carbon Dioxide (CO2)	✓		✓	✓		✓	✓		✓
Carbon Monoxide (CO)		✓		✓	✓	✓	✓		✓
Methane (CH4)				✓	✓	✓	✓		✓
Nitrous Oxide (N20)	✓		✓	✓	✓	✓	✓		✓

Gas % Ranges

Gas Type	1%	5%	10%	20%	50%	100%
Carbon Dioxide (CO2)	✓	✓	✓		✓	✓
Carbon Monoxide (CO)	✓	✓	✓		✓	✓
Methane (CH4)	✓	✓	✓	✓	✓	✓
Nitrous Oxide (N20)	✓	✓	✓	✓	✓	✓

Click here to download Data Sheet

Click here to download Operational Manual

Performance characteristics

New 7.0-inch color touch screen

Animated menu, system information at a glance, and a new fingertip touch operation experience.

The lab optimized standard two-stage reverse osmosis system

The use of dual pumps, dual membranes and transition water tanks reduces system energy consumption, reduces wastewater and produces more stable water quality.

Advanced EDI technology and modules

Providing you with consistent 10MΩ.cm grade high purity water at an optimized operating cost.

Removable water tray

Prevent water droplets from splashing, store water in time, facilitate cleaning, and keep the system clean.

Built-in double water tank

Built-in 20L PE water tank and 1 20L pressure water bucket, saving more experimental space and eliminating the inconvenience of external water bucket.

Features and Advantages

The ultrapure water circulation system can be started and shut down freely to maintain the low bacterial contamination level of the system
Ultrapure water full pipeline disinfection program, can manually execute "circulation disinfection", "water inlet disinfection", "water tank filling", "manual sewage discharge", "stop disinfection"
Fully automatic RO membrane anti-scaling flushing (flushing interval and duration can be set) and manual forced flushing program to extend the service life of the RO membrane
The life of PP, KDF, AC, RO, UP, UF, TF, and UV consumables can be set, and the used time can be displayed, and automatic replacement reminders will be given when the time expires.
Water shortage and water full alarm, source water, RO reverse osmosis water, DI deionized water/UP ultrapure water exceeding the standard alarm
Compatible with two pure water storage methods: pressure water bucket and liquid level water tank, which can directly display the water storage capacity of the water tank to meet different application needs
System time setting (year/month/day/hour/minute), timed standby (0~60min), timed shutdown (0~24hour) functions
Record and check the replacement time of consumables at any time to fully grasp the equipment maintenance information
Complete information query and data management functions, fully control system operation status, water quality, consumables usage, timely alarm, historical alarm and other information
The entire pipeline adopts quick plug-in interface, and all pipes and joints are NSF certified
DOW RO reverse osmosis membrane ensures stable operation and high desalination rate
DOW's high-purity nuclear-grade resin ensures that the water produced reaches 18.2MΩ.cm and reduces TOC precipitation
Ultra-long life 254 & 185nm dual wavelength UV lamp, effective sterilization, reducing TOC
MWCO 5000D UF ultrafiltration module, effectively removes endotoxins/pyrogens
0.2μm PES polyethersulfone composite membrane terminal filter to ensure pure water quality

Performance characteristics

New 7.0-inch color touch screen

The new 7-inch color 16:9 widescreen high-resolution full touch screen control system provides a new fingertip touch operation experience.

4-channel water quality and 3-channel flow monitoring on the host

Source water, secondary RO water, EDI deionized water, UP ultrapure w

The lab optimized standard two-stage reverse osmosis system

The use of dual pumps, dual membranes and transition water tanks reduces system energy consumption and wastewater, ensuring stable water quality under different source water conditions.

ater, 4-way water quality online monitoring and water quality exceeding standard alarm function.

1-way source water flow statistics, EDI deionized water and UP ultrapure water 2-way high-precision quantitative water extraction function.

Standard-50L PE pure water tank

The polyethylene pure water tank with conical bottom design contains an air filter, which can effectively absorb CO2, organic matter and filter bacteria and particles, and can be equipped with UV ultraviolet irradiation sterilization components.

Features and Advantages

Built-in 3-pump system with primary and secondary RO booster pumps and circulation disinfection pumps to achieve complete two-stage reverse osmosis, system circulation and disinfection functions
Full-level filter element alarm prompt function based on time and flow, showing the used and remaining life of consumables
Automatic detection and alarm functions such as system water shortage alarm, water tank full alarm, water quality exceeding standard alarm, consumable life end alarm, water leakage protection alarm, etc. provide safety guarantee
Fully automatic RO membrane anti-scaling flushing program (flushing interval and duration can be set) to extend the service life of the RO membrane
Built-in SD card, can store and view operation data charts and curves, and can be inserted into a USB flash drive for complete data export, providing data traceability
With USB interface system program upgrade function, and optional WIFI module
Built-in perpetual calendar clock, convenient for consumables management and service settings
Ultrapure water full pipeline dosing disinfection function, just add disinfection tablets to start the one-key disinfection program to ensure high-quality pure water
Ultrapure water circulation function, which can be started and shut down freely to maintain low bacterial contamination level in the system
Factory and customer secondary passwords, system parameter settings are all password protected to prevent unauthorized changes
Compatible with 2 pure water storage methods of pressure water barrels to meet different application needs
High-strength all-engineering plastic chassis, ergonomic design, beautiful appearance, no corrosion and rust, ensure the cleanliness of the machine body, in line with GLP specifications
Unique 4-door design, pretreatment, RO and ultra-purification components, EDI and TOC modules, water tanks and control components adopt independent modular structures, making system maintenance more convenient
Pipes and joints are NSF certified to minimize TOC precipitation in the system and ensure the highest pure water quality
Powerful pre-treatment components, combined with 5μm PP transparent filter, KDF composite filter, coconut shell water-washing grade precision activated carbon filter, effectively protect the RO membrane
DOW RO reverse osmosis membrane, RO membrane components optimized by The lab, achieve the combination of long life, stability and high desalination rate of RO membrane
The new integrated ultra-purification component of DOW resin ensures that the water produced reaches 18.2MΩ.cm and reduces TOC precipitation
Ultra-long life 254&185nm dual wavelength UV lamp, combined with medical grade 316L flow hood, effectively sterilizes, reduces TOC, and enhances the system's application range
UF ultrafiltration components, molecular weight cut-off: MWCO5000D, effectively remove pyrogens/endotoxins, can be used for precision cell culture and IVF
Double-layer terminal sterilizing filter, accuracy: (0.45+0.1)μm, using PES polyethersulfone composite filter membrane, double-layer filtration design to ensure the terminal effluent is sterile

Technical Parameters

name	Basic	Heat removal prototype	Low organic matter type	Comprehensive	Built-in TOC monitor
model	Super 10	Super 10F	Super 10V	Super 10FV	Super-TOC10V	Super-TOC 10FV
Pure water output	10 L/hour
Ultrapure water output	Up to 2.0L/min (when there is water in the water tank)
Ultrapure water index
Resistivity (25℃)	18.2MΩ.cm
Total Organic Carbon TOC*	<10ppb	<10ppb	<3ppb	<3ppb	<3ppb	<3ppb
bacteria	<0.01cfu/ml
Particles (>0.1μm)	<1/ml
Pyrogens/endotoxins	N/A	<0.001Eu/ml	N/A	<0.001Eu/ml	N/A	<0.001Eu/ml
RNases	N/A	<1pg/ml	N/A	<1pg/ml	N/A	<1pg/ml
Deoxyribonucleases (DNases)	N/A	<5pg/ml	N/A	<5pg/ml	N/A	<5pg/ml
Pure water index
Resistivity*	>5MΩ.cm
Total Organic Carbon (TOC)*	<30ppb
Silicon Rejection Rate	>99.9%
Source water requirements	Urban drinking tap water, water temperature 5-45℃, water pressure 1.0-4.0Kgf/cm2
Size and weight	Length × width × height: 545 × 470 × 649 mm, weight: about 35 kg
Electrical requirements	220-240V, 50/60Hz
power	240W
System Configuration	Host (including 1 set of purification column) + TOC monitor (TOC type) + 50L PE ultrapure water storage tank

Weight N/A N/A N/A N/A N/A N/A

Dimensions N/A N/A N/A N/A N/A N/A

Additional information

Click outside to hide the comparison bar

Compare