Spin Tissue Processor STP 120

$6,050.00

Shipped From Abroad

Myr Spin Tissue Processor STP 120 has been developed to meet the requirements of every single laboratory. The technology and the unique processing method of the STP 120 qualifies it as the most successful Spin Tissue Processors ever. With more than 3.500 units installed around the world confirms its leading position.

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
SF1033560130128-3
Brands:: Myr

Description

Features
  • A worldwide unique technique

Tissue processing is a technique than uses alcohols to remove water from tissues and replace it with a medium that allows sectioning of tissue. Several methods are used to achieve this. Myr Spin Tissue Processor STP 120 fulfills it in a patented and unique technique that combines several movements for the tissue to achieve perfect infiltration results. This is possible thanks to the world’s best spin processing method.

  • ROTATIONAL AGITATION

The basket with the cassettes is immersed into the reagent vessel. In this position, the basket turns at 60 rpm and changes the rotational direction every 60 seconds. The rotational agitation achieves a perfect infiltration of tissue, a homogeneous mixture of the reagents and a reduction of processing time. To get better results, the user can start optionally a shaking process.

  • SHAKING

This movement can be optionally activated on the control panel and allows the basket to perform an up-down movement inside the vessel that combined with the rotational agitation fulfills a helicoidal movement that increases infiltration quality at a high degree of precision. At the end of this process, baskets start centrifuging.

  • CENTRIFUGING

This function is activated as soon as the infiltration time comes to an end. The basket rises above the reagent’s level but rests inside the vessel. For a period of 60 seconds, it starts whirling at 210 rpm and changes the rotational direction every 15 seconds. This process allows the tissue to be optimally drained and avoids carry-over of reagents from one vessel to another.

Tissue processing achieves by this method almost similar results to those obtained with vacuum systems!

  • Ergonomic control panel

The buttons of the control panel are arranged ergonomically for easy handling. The LCD display shows all the parameters throughout the process, such as program number, vessel, remaining time, start delay, total duration of the program, rotational agitation and shaking, basket’s centrifuging, temperature of paraffin baths, date and time.

  • Easy handling

The instrument has the capacity to store up to 10 different programs that can be freely set up by the user. Each one of the programs can be started in immediate or delayed mode, without a time limit. The instrument can easily be rotated via the four rollers mounted on the base. This allows the user to have fast and safe access to each one of the vessels.

  • Maximum safety standards for the user and the specimen

The individual cover for each one of the vessels reduces the emission of vapors to a minimum. The STP 120-2 and STP 120-3 versions incorporate a fume extraction system that – through a fan and an active charcoal filter – cleanse the vapors before being discharged into the air. Optional adaptor for the laboratory general extraction system.

In case of a power shutdown, the specimens are automatically lowered inside the vessel by means of a battery to protect them against desiccation and solid paraffins. Once power is restored, the instrument resumes the program at the same point in which it was interrupted. lf it is a long power failure and the paraffin baths become solidified, the safety program will be activated. The instrument will then wait for the baths to be fully liquified before going ahead with the change to the paraffin baths.

Emergency motions can be implemented through the battery, such as moving the basket up and down or station change (as long as the basket is not inside a solidified paraffin bath). The instrument is also equipped with an emergency stop button. It is possible to interrupt a program for reloading or advanced unloading of samples.

  • Alarms during the process

If the specimens remain inside a station for a longer time than the programmed time, e.g. due to a power failure, the display will show a message indicating the station number and the overtime spent in that station compared with the initially programmed time. The acoustic and visual alarms can easily be identified by the user. The keyboard can be locked by the user to avoid an inadvertent change of the process parameters during operation.

Technical Data Spin Tissue Processor STP 120
Power requirements
Nominal voltage 100 – 120 V 220-240 V AC (±10%)
Network’s frequency 50/60 Hz
Consumption 400 VA
Fuses 115 V (2xT4A) 230 V (2xT2A)
Accumulator Nickel-Cadmium 12 V 600 mA
Capacity
Reagent stations
Number of vessels 10 (9 if 3 paraffin baths are used)
Volume per vessel 1,8 l
Paraffin stations
Number 2 (optionally 3)
Volume 1,8 l
Nominal voltage 24 V AC
Nominal power per station 100 VA
Temperature setting range (temperature increase by 1 degree celsius) 45 – 70 °C
Overtemperature release 75 °C (± 4 °C)
Cassette baskets
Number of baskets 1 (optionally 2)
Basket capacity 120 cassettes (optionally 240)
Programming
Number of programs 10 (selectable)
Infiltration time per station from 1 m to 99 h 59 m
Rotational agitation selectable
Shaking selectable
Centrifuging time selectable
Program start delay selectable without time limit
Dimensions
Diameter 850 mm
Height 500 – 700 mm
Diameter of the roller’s circle 670 mm
Weight
Including packaging 130 kg
Net (fully equipped) 70 kg

Optional accessories

Spiral support for a second cassette basket (double processing capacity)
Additional basket
Additional paraffin bath (necessary when operating the processor with two baskets)
Fume extraction system with active charcoal filter

 

Click here to download Catalogue

Reviews

There are no reviews yet.

Be the first to review “Spin Tissue Processor STP 120”

Your email address will not be published. Required fields are marked *

Quick Comparison

Spin Tissue Processor STP 120 removeHawksley 1400 Haematocrit Centrifuge removeLeica Rotary Microtome removeOptika B-150P-BRPL Binocular Polarizing Microscope removeOPTIKA B-383POL Trinocular Polarizing Microscope removeOPTIKA IM-3 Inverted Trinocular Phase Contrast Microscope remove
NameSpin Tissue Processor STP 120 removeHawksley 1400 Haematocrit Centrifuge removeLeica Rotary Microtome removeOptika B-150P-BRPL Binocular Polarizing Microscope removeOPTIKA B-383POL Trinocular Polarizing Microscope removeOPTIKA IM-3 Inverted Trinocular Phase Contrast Microscope remove
ImageOptika B-150P-BRPL Binocular Polarizing MicroscopeOPTIKA B-383POL Trinocular Polarizing MicroscopeOPTIKA IM-3 Inverted Trinocular Phase Contrast Microscope
SKUSF1033560130128-3SF1033560084-118SF1033560084-167SF1033560098-3SF1033560098-16SF1033560098-18
Rating
Price

$6,050.00

$690.00

$0.00

$0.00

$0.00

$0.00

Stock
Availability
Add to cart

DescriptionShipped From Abroad Myr Spin Tissue Processor STP 120 has been developed to meet the requirements of every single laboratory. The technology and the unique processing method of the STP 120 qualifies it as the most successful Spin Tissue Processors ever. With more than 3.500 units installed around the world confirms its leading position.
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
In stock
The Hawksley Haematospin 1400 Centrifuges are built in the UK and are made from durable and high-quality components. These centrifuges are ideal for veterinary laboratories and practices specifically designed to produce reliable and accurate results on blood and urine. One of the main features of this centrifuge is that it takes both 2ml microtubes and 75mm microhaematocrits. The classic design of these centrifuges is used worldwide with guaranteed support for all servicing and parts. Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad The fully automated Leica RM2255 microtome embodies the latest technological innovations in microtomy and perfectly harmonizes practical features with an ergonomic design and user safety. Its two-in-one design concept, which allows motorized as well as manual sectioning, provides reproducible, quality sections.
Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped from Abroad Cordless binocular polarized light microscope ideal for students and primary schools, with three PLAN achromatic lenses (400x), FN 18 high eyepoint eyepieces, finite optical system, coaxial focusing, rotating stage, Abbe condenser and powerful, uniform, white color temperature 1 W X-LED1 illumination.
Delivery & Availability: Typically 21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped from Abroad OPTIKA polarizing microscopes offer a complete system for your laboratory analysis, including polarizer and analyzer filters, Bertrand lens for conoscopic observation, compensator plates, and high-precision rotatable stages. Also available the X-LED illumination system, a high-intensity light source that delivers bright and clear images.
Delivery & Availability: Typically 21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped from Abroad IM Series has been engineered and designed to be your ideal solution for fast and reliable routine inspections. The glass stage surface allows optimal visual access to the objective turret. The straight neck leaves ample room for sample positioning and for the most advanced probes. A particularly simple and ingenious optical design allows stable alignments and smooth and accurate movements.
Delivery & Availability: Typically 21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Content
Features
  • A worldwide unique technique
Tissue processing is a technique than uses alcohols to remove water from tissues and replace it with a medium that allows sectioning of tissue. Several methods are used to achieve this. Myr Spin Tissue Processor STP 120 fulfills it in a patented and unique technique that combines several movements for the tissue to achieve perfect infiltration results. This is possible thanks to the world’s best spin processing method.
  • ROTATIONAL AGITATION
The basket with the cassettes is immersed into the reagent vessel. In this position, the basket turns at 60 rpm and changes the rotational direction every 60 seconds. The rotational agitation achieves a perfect infiltration of tissue, a homogeneous mixture of the reagents and a reduction of processing time. To get better results, the user can start optionally a shaking process.
  • SHAKING
This movement can be optionally activated on the control panel and allows the basket to perform an up-down movement inside the vessel that combined with the rotational agitation fulfills a helicoidal movement that increases infiltration quality at a high degree of precision. At the end of this process, baskets start centrifuging.
  • CENTRIFUGING
This function is activated as soon as the infiltration time comes to an end. The basket rises above the reagent’s level but rests inside the vessel. For a period of 60 seconds, it starts whirling at 210 rpm and changes the rotational direction every 15 seconds. This process allows the tissue to be optimally drained and avoids carry-over of reagents from one vessel to another.

Tissue processing achieves by this method almost similar results to those obtained with vacuum systems!

  • Ergonomic control panel
The buttons of the control panel are arranged ergonomically for easy handling. The LCD display shows all the parameters throughout the process, such as program number, vessel, remaining time, start delay, total duration of the program, rotational agitation and shaking, basket’s centrifuging, temperature of paraffin baths, date and time.
  • Easy handling
The instrument has the capacity to store up to 10 different programs that can be freely set up by the user. Each one of the programs can be started in immediate or delayed mode, without a time limit. The instrument can easily be rotated via the four rollers mounted on the base. This allows the user to have fast and safe access to each one of the vessels.
  • Maximum safety standards for the user and the specimen
The individual cover for each one of the vessels reduces the emission of vapors to a minimum. The STP 120-2 and STP 120-3 versions incorporate a fume extraction system that – through a fan and an active charcoal filter – cleanse the vapors before being discharged into the air. Optional adaptor for the laboratory general extraction system. In case of a power shutdown, the specimens are automatically lowered inside the vessel by means of a battery to protect them against desiccation and solid paraffins. Once power is restored, the instrument resumes the program at the same point in which it was interrupted. lf it is a long power failure and the paraffin baths become solidified, the safety program will be activated. The instrument will then wait for the baths to be fully liquified before going ahead with the change to the paraffin baths.

Emergency motions can be implemented through the battery, such as moving the basket up and down or station change (as long as the basket is not inside a solidified paraffin bath). The instrument is also equipped with an emergency stop button. It is possible to interrupt a program for reloading or advanced unloading of samples.

  • Alarms during the process
If the specimens remain inside a station for a longer time than the programmed time, e.g. due to a power failure, the display will show a message indicating the station number and the overtime spent in that station compared with the initially programmed time. The acoustic and visual alarms can easily be identified by the user. The keyboard can be locked by the user to avoid an inadvertent change of the process parameters during operation.
Technical Data Spin Tissue Processor STP 120
Power requirements
Nominal voltage 100 – 120 V 220-240 V AC (±10%)
Network’s frequency 50/60 Hz
Consumption 400 VA
Fuses 115 V (2xT4A) 230 V (2xT2A)
Accumulator Nickel-Cadmium 12 V 600 mA
Capacity
Reagent stations
Number of vessels 10 (9 if 3 paraffin baths are used)
Volume per vessel 1,8 l
Paraffin stations
Number 2 (optionally 3)
Volume 1,8 l
Nominal voltage 24 V AC
Nominal power per station 100 VA
Temperature setting range (temperature increase by 1 degree celsius) 45 – 70 °C
Overtemperature release 75 °C (± 4 °C)
Cassette baskets
Number of baskets 1 (optionally 2)
Basket capacity 120 cassettes (optionally 240)
Programming
Number of programs 10 (selectable)
Infiltration time per station from 1 m to 99 h 59 m
Rotational agitation selectable
Shaking selectable
Centrifuging time selectable
Program start delay selectable without time limit
Dimensions
Diameter 850 mm
Height 500 – 700 mm
Diameter of the roller’s circle 670 mm
Weight
Including packaging 130 kg
Net (fully equipped) 70 kg
Optional accessories
Spiral support for a second cassette basket (double processing capacity)
Additional basket
Additional paraffin bath (necessary when operating the processor with two baskets)
Fume extraction system with active charcoal filter
 
Click here to download Catalogue
The Hawksley Haematospin 1400 Centrifuges are built in the UK and are made from durable and high-quality components. These centrifuges are ideal for veterinary laboratories and practices specifically designed to produce reliable and accurate results on blood and urine. One of the main features of this centrifuge is that it takes both 2ml microtubes and 75mm microhaematocrits. The classic design of these centrifuges is used worldwide with guaranteed support for all servicing and parts. Technical specifications:
  • Speed: 11,800rpm with 24- place rotor
  • RCF: 14,000g with 24-place rotor
  • Acceleration: 0-11,800rpm in 60 seconds, with 24-place rotor
  • Brake: Automatic
  • Noise: 62dB running with 24-place rotor
  • Motor: High precision AC/DC series wound motor, brush gear, computer wound coil winding, balance armature and high speed bearings.
  • Timer: 0-15 minute timer, graduated in 1 minute increments. Automatic switch at zero
  • Weight: 5.1Kg net (without rotor)
  • Dimensions: 23.5cm height x 27cm diameter, footprint 16cm diameter
  • Construction: Aluminium casing with a steel lid
  • Finish: Body cream white baked enamel, with matt black baked enamel lid
 
Click Here To Download Catalogue
The fully automated Leica RM2255 microtome embodies the latest technological innovations in microtomy and perfectly harmonizes practical features with an ergonomic design and user safety. Its two-in-one design concept, which allows motorized as well as manual sectioning, provides reproducible, quality sections. Features:
  • Compact, ergonomic design
  • Ergonomically designed handwheel handle
  • Smooth-running handwheel with integrated quick-lock mechanism for safety
  • Enclosed micrometer feed mechanism
  • Low-maintenance cross-roller bearings
  • Two forward and backward coarse feed speeds
  • Alternate trimming and sectioning modes, as indicated on the display
  • Speed control through the cutting window for enhanced efficiency
  • Automatic, variable specimen retraction, depending on sectioning speed
  • Section thickness totalizer and section counter
  • Intuitive control panel
  • Integrated communication display
  • Precise specimen orientation with zero point reference
  • Knife holder design with red colored knife guard
  • Precise lateral knife holder adjustment with click stop settings
  • Spacious and easy-to-clean section waste tray
  • Wide range of accessories
  Technical Specifications: Section thickness Setting thickness setting range: 0.5 – 100 µm Setting values: from 0.5 – 5 µm in 0.5 µm increments from 5 – 20 µm in 1 µm increments from 20 – 60 µm in 5 µm increments from 60 – 100 µm in 10 µm increments Trimming section thickness setting range: 1 – 600 µm Setting values: from 1 – 10 µm in 1 µm increments from 10 – 20 µm in 2 µm increments from 20 – 50 µm in 5 µm increments from 50 – 100 µm in 10 µm increments from 100 – 600 µm in 50 µm increments Object feed:  24 mm ± 1 mm, feed motion via step motor Vertical specimen stroke:  70 mm Sectioning modes:  4   Specimen retraction: In manual operation:  5 – 100 µm in 5 µm increments, can be turned off In motorized operation:  varying with the sectioning speed, can be turned of Electric coarse feed: 300 µm/s and 800 µm/s Sectioning speed: 0.5 – 420 mm/s ± 10% Maximum specimen size (L x H x W): 50 x 60 x 40 mm Specimen orientation horizontal: ±8°, vertical: ±8° Nominal supply voltages: 100/120/230/240 V AC ± 10% Nominal frequency: 50/60 Hz Power draw: 340 VA   Dimensions basic instrument Width (incl. handwheel):  413 mm Depth (incl. waste tray): 618 mm Height (with storage area on cover): 305 mm Weight (without accessories): Approx. 40 kg   Dimensions control panel: W x D x H 121 x 166 x 50 mm Weight: approx. 0.66 kg, approx. 1.45 Ibs Click Here To Download Catalogue
Cordless binocular polarized light microscope ideal for students and primary schools, with three PLAN achromatic lenses (400x), FN 18 high eyepoint eyepieces, finite optical system, coaxial focusing, rotating stage, Abbe condenser and powerful, uniform, white color temperature 1 W X-LED1 illumination. Slim and easy to carry, it is equipped with all the main controls to start learning how to use an advanced microscope and with long lasting LED illumination to provide over 20 years of use. Rotating swing-out polarizer and sliding-out fixed analyzer included. The exclusive Li-Ion battery ensures unparalleled duration and fast recharge. Features:
  • Observation mode: Brightfield, Polarized Light.
  • Head: Binocular, 30° inclined; 360° rotating.
  • Eyepiece: WF10x/18 mm, secured by screw.
  • Nosepiece: Quadruple ball bearings revolving nosepiece.
  • Objectives: – N-PLAN 4x/0.10, with anti-fungus treatment – N-PLAN 10x/0.25 , with anti-fungus treatment – N-PLAN 40x/0.65 , with anti-fungus treatment
  • Specimen stage: Rotatable round stage, 120 mm diameter.
  • Focusing: Coaxial coarse and fine focusing mechanism with limit stop to prevent the contact between objective and specimen. Adjustable tension of coarse focusing knob.
  • Condenser: N.A. 1.25, pre-centered, fixed with iris diaphragm.
  • Illumination: X-LED1 with white 1 W LED and light intensity control.
  • Color temperature: 6,300 K. Li-Ion battery for long lasting operation. Multi-plug 100-240Vac/5Vdc external power supply.
  • Polarizing filters: Rotating Polarizer (swing-out) and fixed Analyzer (sliding-out).
  Technical Specifications:
Observation Method - Transmitted Light Brightfield Yes
  Simple polarized light Yes
Main Body Type Upright
  Construction material Aluminum die-cast
Head Type Binocular (Siedentopf)
  Inclination 30°
  360° rotating Yes
  Interpupillary distance (mm) 48-75
  Dioptric adjustement On left tube
  Fixing screw for eyepieces Yes
  Tube inner diameter (mm) 23
Eyepieces Field number (mm) 18
  Magnification 10x
  High eyepoint (for glass wearers) Yes
  Pointer As optional
  Micrometric scale As optional
  Diameter of micrometer glass (mm) 20
Nosepiece Positions Quadruple
  Bi-directional Yes
  Rotation on ball bearings Yes
  Objective thread RMS
Objectives Optical system 160
  Anti-fungus treatment Yes
  Parfocal distance (mm) 45
  Standard magnifications 40x-400x
  Type N-PLAN
  Objectives included 4x/0.10, W.D. 15.2 mm 10x/0.25, W.D. 5.5 mm 40x/0.65, W.D. 0.45 mm
Stage Type Round
  Rotation 360°
  Dimensions (mm) 120
  Material Anti-scratch painting
  Specimen clips Yes
  Slide number 1
Condenser - Single Position Type Fixed
  Numerical aperture (N.A.) 1.25
  Diaphragms Iris
  Centrable Pre-centered
Focusing System Type Coaxial coarse & fine
  Coarse total travel (mm) 16
  Fine total travel (per single rotation) (mm) 0.4
  Fine graduations 100
  Fine resolution (µm) 4
  Upper stop to prevent contact Yes
  Adjustable tension Yes
Transmitted Illumination Type X-LED
  X-LED type X-LED1
  Light source power (W) 1
  Brightness control Manual
  Lifetime (hours) > 65,000
  Temperature (K) 6,300
  Max. required power (W) 1.5
Power Supply for Transmitted Illumination Type External
  Microscope connector Jack, 2.1 mm
  Power plug type Multi-plug (EU, UK, US)
  Input voltage 100/240 Vac, 50/60 Hz
  Output voltage 5 Vdc 500 mA
  LED indicator Yes
  Rechargeable batteries Yes
  Battery type Li-ion (battery pack)
  Working time of batteries (hours) 15
  Charging time of batteries (hours) 6
Accessories Included Dust cover Yes
  Tension adjustment tool Yes
  User Manual Digital version (downloadable)
Additional Information Rotating polarizer (swing-out) and fixed analyzer (sliding-out) filters
Product Weight Height (mm) 350
  Width (mm) 170
  Depth (mm) 320
Product Weight (kg) 4
 
Click Here To Download Catalogue 
Observation mode: Brightfield, transmitted polarized light and conoscopy. Bertrand lens and polarizing attachment: Swing-out type with centering mechanism for observation in conoscopy/orthoscopy. Rotatable analyzer from 0° to 90° with graduated scale. Tint plates: 1° order red (λ); λ/4; Quartz wedge. Head: Trinocular (fixed 50/50), 30° inclined, 360° rotating. Interpupillary distance: Adjustable between 48 and 75 mm. Dioptric adjustment: On the left eyepiece tube. Eyepieces: WF10x/20 mm, high eye-point and secured by screw. One with crosshair. Nosepiece: Quadruple revolving nosepiece, rotation on ball bearings. Centering system for each objective. Objectives (strain-free): IOS N-PLAN POL 4x/0.10 IOS N-PLAN POL 10x/0.25 IOS N-PLAN POL 40x/0.65 IOS N-PLAN POL 60x/0.80 All with anti-fungus treatment. Specimen stage: Rotatable stage with locking mechanism. Vernier scale with accuracy 0.1 mm. Diameter 160 mm. Specimen slide clamps. Focusing: Coaxial coarse (adjustable tension) and fine focusing mechanism with limit stop to prevent the contact between objective and specimen. Condenser: Abbe N.A. 1.25, with objective-coded iris diaphragm, focusable and centerable. With rotating polarizing filter. Transmitted illumination (Fixed Koehler type): X-LED3 with white 3.6 W LED (6.300 K) with brightness control. Multi-plug 100-240Vac/6Vdc external power supply.
 Specifications
Head Trinocular, 30° inclined, 360° rotating.
Eyepiece WF10x/20mm and with cross-hair micrometer
Bertrand lens Swing-out type; center-able.
Polarizing attachment 0° – 90° rotating analyzing filter. Tint plates included: 1° order red (lambda), lambda/4, quartz wedge.
Nosepiece Quadruple, reversed
Objectives IOS N-PLAN POL 4x, 10x, 40x, 60x View Optika Objective Brochure
Focusing system Coaxial coarse and fine
Stage Round, 360° rotating, 160 mm diameter, with sample clips and stop knob
Condenser Abbe N.A. 1.25, iris diaphragm, focusable and centrable. With rotating polarizer
Illumination X-LED3 illumination system with brightness control. 3.6 Watt LED Luminous flux: 200 lumen Luminous intensity: 900 cd Equivalent to a dichroic halogen lamp with 20W, Equivalent to a standard halogen lamp with 50W Correlated Color Temperature: 6300K Pure white, no need of blue correction filter.
 
Click Here To Download Catalogue
Specifications
Observation Modes Brightfield, phase contrast.
Head Trinocular observation head, inclined 45°. Diopter adjustment on left eyepiece. Interpupillary adjustment 50-75 mm.
Eyepieces Wide field eyepieces WF10x/22 with field number 22.
Objectives Infinity corrected optical system IOS (Infinity Optical System). Plan-achromatic LWD objectives infinity corrected, for thickness 1.2 mm, made by following objectives: IOS LWD W-PLAN PH 10x/0.25, W.D. 7.30 mm IOS LWD W-PLAN PH 20x/0.40, W.D. 6.86 mm IOS LWD W-PLAN PH 40x/0.65, W.D. 3 mm All objectives are treated with an anti-fungus treatment.
Stage Fixed stage, dimensions 250 x 160 mm. 2 stage insert (glass and metal) with a hole for small dimension specimens. OPTIONAL: Mechanical stage mountable on the right side of the stage, total dimension = 250 x 230 mm, X-Y translation range 120 x 80 mm, metallic interchangeable inserts for slides, Petri dishes, Terasaki, multi-Well plates, etc. Pair of side extensions to expand the surface of the stage.
Nosepiece Quintuple revolving nosepiece, rotation on ball bearings.
Focusing Coaxial coarse and fine focusing mechanism (graduated, 0.002mm) with upper stop, to prevent the contact between objective and specimen. Adjustable tension of coarse focusing knob.
Condenser LWD condenser, N.A. 0.30, working distance 72 mm. The condenser can be removed to extend the working distance up to 150 mm. Presented slider with phase rings 4x/10x and 20x/40x.
Illumination Light source type X-LED8 with white 8W LED; light intensity control using a knob on the front side of the frame. Color temperature: 6300K LED average lifetime approx. 50,000h Voltage: 110/240Vac, 50/60Hz, 1A; Fuse: T500mA 250V Max power required: 13W
Dimensions Height: 495 mm Width: 230 mm Width with optional mechanical stage: 300 mm Depth: 540 mm Weight: 9 kg
Accessories Blue, green and frosted filter. Instruction manual and dust cover included.
 
Click Here To Download Catalogue
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • Rating
  • Price
  • Description
Click outside to hide the comparison bar
Compare