Tecar Beauty 7000

Operating range:

Suitable for operations on telangiectasia and superficial pigmentation: improvement of photoaged skin.

Technical Parameters:

Grip model: F+E, F+E+ Rated input power (w): 1350 Dimensions (mm): 610*340*770 Weight (Kg): 47

Accessories Details:

The equipment consists of operating tools and filters, power supply and control device, protection system, cooling system (internal circulation water cooling, fan).

How it works:

The HONKON-Slimming system mainly uses four methods: roller machinery, vacuum negative pressure adsorption, bipolar radiofrequency thermal melting, and red light and infrared light operation to produce an operating effect on the skin through synergistic effects.

Operating range:

Face, neck, limbs, buttocks and abdomen, face and buttocks firming, postpartum and postoperative body recovery. Reduce excess fat. Skin firming: strengthen the skin, increase skin elasticity, etc.

Product advantages:

4 types of operating handpiece configurations: can easily achieve body shaping, skin tightening, skin texture, etc. according to different parts, projects, demands, etc. Control system: adsorption strength, adsorption frequency, roller speed, roller direction, red light intensity, radio frequency power, etc. can all be adjusted to meet the patient's demands. Dual monopolar radio frequency system: The dual monopolar radio frequency system with 2.64M radio frequency power source avoids epidermal burns. The radio frequency energy acts more concentratedly on the target tissue (subcutaneous tissue), the pain is milder, and the number of times is significantly reduced.

Technical Parameters:

Number of handpieces: 4 Handpiece models: XF-I+, XF-VII+, XF-VIII, XF-IX Mechanical roller: ≤20R/min (and the speed increases with the increase of infrared light power) RF frequency: 2.64MHz Red light intensity: IV level adjustable Negative pressure flow: ≤140L/min Red light wavelength: 700-2000nm Red light power: ≤20W Negative pressure intensity: ≤-0.09MPa Adsorption intensity: I-VIII adjustable RF power: 400W

How it works:

HONKON's water oxygen cleanser fully combines oxygen and nutrient solution, and sprays water vapor mixed particles from the nozzle at a speed of 230m/s (similar to the spray form) to act on the skin. The fine particles with a diameter of about 50-80um (smaller than the diameter of the pores) clean the skin from the epidermis to the basal layer below the epidermis. If nutrients are added to the base liquid, the internal environment of the skin can be adjusted, which can replace manual skin care.  

Operating range:

1. Clean the epidermis of the skin 2. Hydrate and oxygenate the skin.  

Product advantages:

The high-pressure gas is mixed with the nutrient solution through a stainless steel needle and sprayed out water vapor particles with a diameter of about 50μm at a speed of up to 230m/s. Oxygen pressure gauge, real-time pressure display. The gas output flow control system can adjust the gas output volume and gas output pressure according to different parts. It can be used with nutrient solution products to achieve better results. The liquid output flow control system can adjust the liquid output volume and liquid output pressure according to different parts, which is more targeted.  

Technical Parameters:

Water mist particle speed: ≤230m/s Built-in air source output pressure: ≤0.8MPa Number of instruments: 4 Water mist particle diameter: ≤80um Gas source type: built-in gas source 5L gas tank Water oxygen pen: O-II Number of water oxygen pens: 2 Insurance specification: Max6A Power supply: AC220V±10%, 50HZ, AC110V±10%, 60HZ Gear: 1-2 gears adjustable, one gear step Accessories Details: O—II Water Oxygen Pen It is beautiful, easy to use, and can be repaired after damage, which reduces the user's cost of use; the deep cleaning effect is obvious; customers are advised to stock up on water oxygen pens O-Ⅱ type for emergencies.