New
VENUS SOLO OEM SENSOR
Ask for Price$0.00
Shipped From Abroad
Key Features
- Single gas (user defined)
- Backward compatible with ADC’s ‘Eclipse’
- Linearised Output
- Continuous status signal to check device health
Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Description
Description
The Venus Solo OEM sensor is a self-contained unit designed for integration into other manufacturers’ equipment and provides a measurement of gas concentration according to specific user requirements. These GFC (Gas Filter Correlation) sensors generate a signal proportional to the infrared absorption of the measured gas.
Providing the gas concentration lies within the designed range of the sensor, the signal is periodically compared with a reference gas. Gas concentrations are indicated through the non-linearised analogue signal output. Gas connections to and from the sensor are via suitable fittings on the gas measuring cell.
The Venus Solo OEM Series sensors electrical supply is designed to accept 24V DC (3amp max).
Our Venus Solo OEM sensor uses GFC (Gas Filter Correlation) technology to give highly accurate gas measurements.
The Venus Solo can be integrated into your own gas analyzer or management system and offers the user a 0-2.5v analogue output.
The sensor is currently available as either: Carbon dioxide (CO2), carbon monoxide (CO), nitrous oxide (N20), methane (CH4) or nitric oxide (NO). If your application requires a different gas, just let us know and we can customise it to your needs.
The Venus Solo is used in Military applications to protect submariners from carbon monoxide (CO) exposure.
Technical Specification
Venus Solo
Quick Comparison
| VENUS SOLO OEM SENSOR remove | Pilot-RO Water Purification System remove | Ax60+ Kiosk remove | OXYGEN & CARBON DIOXIDE MONITOR remove | LIGHTWEIGHT PERSONAL CO2 ALARM remove | PERSONAL CO2/O2 MONITOR-ASPIDA remove | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | VENUS SOLO OEM SENSOR remove | Pilot-RO Water Purification System remove | Ax60+ Kiosk remove | OXYGEN & CARBON DIOXIDE MONITOR remove | LIGHTWEIGHT PERSONAL CO2 ALARM remove | PERSONAL CO2/O2 MONITOR-ASPIDA remove | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Image |  |  |  |  |  |  | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| SKU | SF1033560130126-2 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rating | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Price | Ask for Price | Ask for Price | Ask for Price | Ask for Price | Ask for Price | Ask for Price | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Stock | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Availability | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Add to cart | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description | Shipped From Abroad
Key Features
Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
| Shipped From Abroad
An economical choice of primary pure water for daily laboratory cleaning , with a water output of 45 - 180 liters per hour, ion retention rate >98%, organic matter retention rate >99% (when MW >200 Daltons), particle and bacteria retention rate >99%, which can meet the requirements of conventional production process water and laboratory utensil cleaning water, and can be used as the inlet water for ultrapure water systems, high-pressure steam sterilizers, environmental test chambers and other instruments.
Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
| Shipped From Abroad
Key Features
Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
| Shipped From Abroad
Key Features
Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
| Shipped From Abroad
Key Features
Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
| Shipped From Abroad
Key Features
Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Content | DescriptionThe Venus Solo OEM sensor is a self-contained unit designed for integration into other manufacturers’ equipment and provides a measurement of gas concentration according to specific user requirements. These GFC (Gas Filter Correlation) sensors generate a signal proportional to the infrared absorption of the measured gas. Providing the gas concentration lies within the designed range of the sensor, the signal is periodically compared with a reference gas. Gas concentrations are indicated through the non-linearised analogue signal output. Gas connections to and from the sensor are via suitable fittings on the gas measuring cell. The Venus Solo OEM Series sensors electrical supply is designed to accept 24V DC (3amp max). Our Venus Solo OEM sensor uses GFC (Gas Filter Correlation) technology to give highly accurate gas measurements. The Venus Solo can be integrated into your own gas analyzer or management system and offers the user a 0-2.5v analogue output.The sensor is currently available as either: Carbon dioxide (CO2), carbon monoxide (CO), nitrous oxide (N20), methane (CH4) or nitric oxide (NO). If your application requires a different gas, just let us know and we can customise it to your needs. The Venus Solo is used in Military applications to protect submariners from carbon monoxide (CO) exposure. Technical SpecificationVenus Solo | An economical choice of primary pure water for daily laboratory cleaning , with a water output of 45 - 180 liters per hour, ion retention rate >98%, organic matter retention rate >99% (when MW >200 Daltons), particle and bacteria retention rate >99%, which can meet the requirements of conventional production process water and laboratory utensil cleaning water, and can be used as the inlet water for ultrapure water systems, high-pressure steam sterilizers, environmental test chambers and other instruments
Technical Parameters
| CO2 MONITOR & ALARM DESIGNED FOR KIOSKS
The Ax60+ Kiosk is a CO2 monitor and alarm specifically designed by Analox to alert personnel to a build up/leak of CO2 using a state-of-the-art infrared sensor. The alarm provides both audio and visual alerts in the case of increased levels of carbon dioxide (CO2). Up to four alarms can be added as needed and the unit does not need periodic calibration. CO2 monitoring with the AX60+ KioskThe Ax60+ Kiosk is a smaller version of the popular Ax60+ carbon dioxide (CO2) monitor. It is simple to wall mount in the area where carbon dioxide (CO2) is stored or piped. The Ax60+ Kiosk sensor needs to be installed at a height of 12-18 inches (305-457mm) above the floor – this is because the carbon dioxide (CO2) that leaks from a gas cylinder is denser than ambient air and can collect at low levels. The alarm should be located above the sensor at about head height or at the entrance to the kiosk.Technical SpecificationSensor Unit | DescriptionThe SV-Multigas-2 is a dual oxygen (O2) and carbon dioxide (CO2) monitor designed for vehicles operating in the upper atmosphere. Housed in a robust, compact enclosure, the unit is ideal for use in airborne delivery systems, satellites and aircraft cabins. Since 2014 the SV-Multigas-2 has been successfully used in rockets travelling to outer space. Flexibility The SV-Multigas-2 incorporates user maintainable analogue sensors that provide a 1 to 5 V output. This modular approach to gas monitoring ensures that our customers have the flexibility to integrate the unit into their own system. It can be either installed directly in the gas path or used for general air monitoring.Technical SpecificationSV-Multigas-2 | CO2 MONITORING WITH THE CO2 BUDDYCarbon Dioxide Sensor The CO2BUDDY uses state-of-the-art Non-Dispersive Infrared (NDIR) technology to detect CO2. The NDIR system monitors the air in the surrounding environment for the specific CO2 elements. No additional “control” or “calibration” gasses are needed. The simple-to-operate unit protects users and those nearby by alerting them to CO2 leaks or buildup with multiple alarms – a high visibility LED display, a loud and powerful audible alert and a powerful vibration motor. The vibration setting is ideal for workers in noisy environments where the audible alarms could be drowned out by background noise. Users can customize which alarm setting they prefer. The CO2BUDDY has multiple set-points to comply with the most common safety regulations and jurisdictional requirements, which can be different by country, region, state and municipality. The unit comes with pre-configured alarm set points that meet safety standards across the globe including Europe’s EH40 legislation, OSHA and NIOSH TWA requirements in the United States.Technical SpecificationCO2 BuddyCharacteristicsCalibrate on site Unlike most portable CO2 monitors which require you to send the device back to the manufacturer for calibration, the CO2BUDDY allows you to calibrate on site, all you need is fresh air! Saving you time and money, the CO2BUDDY is perfect for those who like to get the job done.Built for user convenience Very simple to operate, the user can select the pre-configured alarm set points which all feature a TWA (Time Weighted Average) alarm, continuously monitoring the environment over an 8-hour period. The environmentally-friendly CO2BUDDY features a rechargeable battery that can easily last a minimum of 48 hours on a single charge. The unit is designed to be charged overnight or during off-hours, virtually eliminating the need for service returns or battery replacements.Reliable This advanced monitor is also extremely durable, offering long-lasting sensor life and reliable personal monitoring for virtually anyone who may come into contact with CO2 during the course of their day. The CO2BUDDY has been providing an added level of safety and security worldwide since its introduction in 2019. This impressive REVIEW OF CO2BUDDY BY SeetheAir.org provides a fresh perspective of the product’s benefits and specific applications.CO2 exposure While brief exposure to CO2 is common throughout the workday, it’s the potential build-up of the gas from different locations that can often put employees at risk. The CO2BUDDY monitors the average CO2 level over an 8 hour period and will alarm when the overall exposure becomes harmful. Lightweight, portable and highly effective, the CO2BUDDY is one of the smallest and lightest personal CO2 monitors available today. Designed with user comfort and convenience in mind, the unit can be clipped to a shirt pocket, belt or lanyard with little interference with the monitoring process.Tried, tested and Trusted The CO2BUDDY is currently in use worldwide in such diverse industries as food and beverage, hospitality, research laboratories, medical facilities with cryogenic process monitoring, food processing and storage facilities and stadiums. Gas delivery drivers who service many of these industries on a daily basis are key target users of the CO2BUDDY. From initial power up, you must allow a two-hour charge and perform a quick fresh air calibration. Your CO2BUDDY is then ready to protect you!Download Quick Start GuideClick here to download Data Sheet | The Aspida is a robust, high specification personal oxygen (O2), carbon dioxide (CO2) or dual (O2 / CO2 combined) monitor which can be worn on a belt or even wall mounted as a backup to a primary safety system. The Aspida, (Greek for Shield) helps you comply with the regulations, will remind you when maintenance is needed and it safeguards the user from the gas risks.Technical SpecificationAspida
CharacteristicsPersonal Protection Enriched oxygen (O2) can cause a condition on the human body called hyperoxia, enriched CO2 is highly toxic, both are a threat to life and must be safeguarded against. If an inert gas such as nitrogen (N2), argon (Ar), helium (He) or liquid nitrogen (LN2) leaks then this will deplete the levels of oxygen (O2) in the surrounding area, creating a dangerous atmosphere. The Aspida can offer personal protection and alerts to all of these risks, offering you true peace of mind.Ideal Solution Offering audible and visual alarms, data logging and a man down alarm for lone workers, it is an ideal solution to protect staff from the dangers of a leak of carbon dioxide (CO2), oxygen (O2) or inert gas. The Aspida is an affordable, easy to operate gas detection monitor and is perfect for ensuring safety in areas where the gas is piped, used or stored. It operates using rechargeable battery technology allowing it to run for more than 12 hours continuously between charges.Click here to download User ManualClick here to download Data SheetDownload Aspida Software | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight | N/A | N/A | N/A | N/A | N/A | N/A | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Additional information | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Reviews
There are no reviews yet.