HONKON-M206 Water Oxygen Facial Cleanser

Brands: Honkon

Ask for Price~~$0.00~~

Shipped From Abroad

Operation scope:

Clean the epidermis of the skin
Hydrate and oxygenate the skin.

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Sku:

SF1033560130100-9

Brands:: Honkon

Description
Reviews (0)

Description

Principle of Operation

How it works:

HONKON’s water oxygen cleanser fully combines oxygen and nutrient solution, and sprays water vapor mixed particles from the nozzle at a speed of 230m/s (similar to the spray form) to act on the skin. The tiny particles with a diameter of about 50-80um (smaller than the diameter of the pores) pass from the epidermis to below the basal layer of the epidermis to clean the skin. If nutrients are added to the base liquid, it can improve the skin’s internal environment and can replace manual skin care.

Operating range:

1. Clean the epidermis of the skin 2. Hydrate and oxygenate the skin.

Product advantages:

The high-pressure gas is mixed with the nutrient solution through a stainless steel needle and sprayed out water vapor particles with a diameter of about 50μm at a speed of up to 230m/s.

Oxygen pressure gauge, real-time pressure display, the operator can easily judge whether it meets the operation needs.

The gas output flow control system can adjust the gas output volume and gas output pressure according to the patient’s operation site and operation lesion.

When used in conjunction with nutrient solution products, the operating effect and factor operating effect complement each other to achieve 1+1≥2.

Technical Parameters:

Water mist particle speed: ≤230m/s

Built-in air source output pressure: ≤0.8MPa

Number of instruments: 4

Water mist particle diameter: ≤80um

Gas source type: built-in gas source 5L gas tank

Operation pen: O-II

Number of operating pens: 2

Insurance specification: Max6A

Power supply: AC220V±10%, 50HZ, AC110V±10%, 60HZ

Gear: 1-2 gears adjustable, one gear step

Accessories Details:

The O-II operating glove is beautiful, easy to use, and can be repaired after damage, which significantly reduces the user’s cost of use; the cleaning effect is obvious; customers are advised to stock up on an O-II type operating glove packaged in a shell box in case of emergency.

Reviews

There are no reviews yet.

Be the first to review “HONKON-M206 Water Oxygen Facial Cleanser”

Quick Comparison

HONKON-M206 Water Oxygen Facial Cleanser remove FlowMir Disposable Turbine with Cardboard Mouthpiece remove Maico TouchTymp MI36 Tympanometry remove Intersurgical Solus i-gel LMA (Size; 2, 3, 4 & 5) remove Bistos BT- 720 Patient Monitor remove Omron Compressor Nebulizer remove

Name HONKON-M206 Water Oxygen Facial Cleanser remove FlowMir Disposable Turbine with Cardboard Mouthpiece remove Maico TouchTymp MI36 Tympanometry remove Intersurgical Solus i-gel LMA (Size; 2, 3, 4 & 5) remove Bistos BT- 720 Patient Monitor remove Omron Compressor Nebulizer remove

Image

SKU SF1033560130100-9 SF1033560084-22 SF1033560063-10 SF1033560084-20 SF1033560059-8 SF1033560084-38

Rating

Price

Ask for Price~~$0.00~~

$145.00

Ask for Price~~$0.00~~

$12.75

Ask for Price~~$0.00~~

$50.00

Stock

Availability

Add to cart

Add to basket

Description

Shipped From Abroad Operation scope:

Clean the epidermis of the skin
Hydrate and oxygenate the skin.

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock Spirometry testing requires maximum accuracy and hygiene. Each Flowmir disposable turbine, which includes a cardboard mouthpiece, has been individually factory calibrated with a computerized system and it is packaged individually. FlowMIR® is an inexpensive alternative to a costly reusable flowmeter and replaces the need for an antibacterial filter Typically 2 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped from Abroad TouchTymp MI 36 combines diagnostic middle ear analyzer and audiometry tests in one exceptional device. The full 10.4" touchscreen with its user-friendly interface guarantees a unique intuitive operation and allows to quickly change parameters. You can easily switch between the tests without reorganizing from one to another device and beneft from its small footprint when facing limited desk space. touchTymp MI 36 really improves your workﬂow every day. Delivery & Availability: Typically 10 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock

Made of medical grade Silicone, have good biocompatibility, non-toxic.
Exclusive soft seal cuff can be insert comfortable, minimizing potential trauma and increasing sealing.
Strengthen neck and tip eases insertion and prevents folds.
Kink-free tube eliminates the risk of airway tube occlusion.
Have different size, suitable for neonate, infant, child and adult.
Different color cuff, different material cuff, with aperture bar or not.
Reusable types must be cleaned and disinfected or sterilizated before use only 40 times.

Delivery & Availability: Typically 2 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped from abroad Bistos BT - 720 Patient Monitor: Bistos Portable Patient Vital Signs Monitor, SpO2, Pulse, *NIBP, BT-720. The Bistos BT-720 is a compact size vital signs monitor with the standard parameters of SpO2 and Pulse. You can also add the NIBP and/or Masimo SpO2 at an additional cost. The BT-720 has a 4.3" color touch screen The PC software allows the vital signs information to be transferred and analyzed on a computer. Delivery & Availability: Typically 7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock

Omron Compressor Nebulizer: Nebulizer is a breathing machine used to treat long conditions such as asthma, cystic fibrosis, and other respiratory illnesses. They administer medication in the form of a mist that's inhaled into the lungs and are often used in situations in which using an inhaler is difficult or ineffective.

Delivery & Availability: Typically 2 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Content

Principle of Operation

How it works:

HONKON's water oxygen cleanser fully combines oxygen and nutrient solution, and sprays water vapor mixed particles from the nozzle at a speed of 230m/s (similar to the spray form) to act on the skin. The tiny particles with a diameter of about 50-80um (smaller than the diameter of the pores) pass from the epidermis to below the basal layer of the epidermis to clean the skin. If nutrients are added to the base liquid, it can improve the skin's internal environment and can replace manual skin care.

Operating range:

1. Clean the epidermis of the skin 2. Hydrate and oxygenate the skin.

Product advantages:

The high-pressure gas is mixed with the nutrient solution through a stainless steel needle and sprayed out water vapor particles with a diameter of about 50μm at a speed of up to 230m/s. Oxygen pressure gauge, real-time pressure display, the operator can easily judge whether it meets the operation needs. The gas output flow control system can adjust the gas output volume and gas output pressure according to the patient's operation site and operation lesion. When used in conjunction with nutrient solution products, the operating effect and factor operating effect complement each other to achieve 1+1≥2.

Technical Parameters:

Water mist particle speed: ≤230m/s Built-in air source output pressure: ≤0.8MPa Number of instruments: 4 Water mist particle diameter: ≤80um Gas source type: built-in gas source 5L gas tank Operation pen: O-II Number of operating pens: 2 Insurance specification: Max6A Power supply: AC220V±10%, 50HZ, AC110V±10%, 60HZ Gear: 1-2 gears adjustable, one gear step

Accessories Details:

The O-II operating glove is beautiful, easy to use, and can be repaired after damage, which significantly reduces the user's cost of use; the cleaning effect is obvious; customers are advised to stock up on an O-II type operating glove packaged in a shell box in case of emergency.

- Comfortable Packaging
- Singularly Tested and Packed
- Always 100% accurate and hygienic
- No Calibration required
- No Sterilization required
- No Antibacterial Filter required
- No Cross Contamination
- Not affected by Vapour Condensation
- Not affected by Ambient conditions
- A full Spirometry session can be performed, including a Bronchial Challenge and POST Bronchodilator test. For each patient after the Spirometry test, both turbine and spirometer mouthpiece are thrown away

TouchTymp MI 36 combines diagnostic middle ear analyzer and audiometry tests in one exceptional device. The full 10.4" touchscreen with its user-friendly interface guarantees a unique intuitive operation and allows to quickly change parameters. You can easily switch between the tests without reorganizing from one to another device and beneft from its small footprint when facing limited desk space. touchTymp MI 36 really improves your workﬂow every day. FEATURES AT A GLANCE

Combo device with small footprint
Customizable to suit individual needs
High resolution and quick screen transitions
Full touch-based interface for intuitive handling
Probe tone 226 Hz, 678 Hz, 800 Hz
Optional high-frequency probe tone 1 kHz
Acoustic reﬂex stimuli 500 Hz,1 kHz, 2 kHz, 4 kHz, BB, HP, LP (ipsilateral and contralateral)
Reﬂex Decay test (ipsilateral and contralateral)
ETF test for intact and perforated eardrums
Air conduction audiometry
Bone conduction audiometry
Built-in printer or data transfer to PC
Optional MAICO Sessions PC Software connectable with OtoAccess® or Noah patient database for easy data management

Comprehensive test protocols

Our touchTymp MI 36 provides comprehensive standard protocols for immediate operation of screening and diagnostic test processes: tympanometry with 226 Hz, tympanometry with automatic or fxed acoustic reﬂexes, reﬂex decay, Eustachian tube function testing (ETF) plus air conduction and bone conduction audiometry. The optional high-frequency probe tone of 1 kHz is ideal for providing reliable results when testing newborns

Stay focused on your patients

The unique touchTymp light bar on our shoulder box probe provides a real-time progression of the immittance test. The shoulder box can easily be clipped to your patient's top for controlled handling of the diagnostic probe. The light indicator shows you which ear is tested and the test result.

Printing made easy

Print test results instantly by using the touchTymp built-in printer. Place the shoulder box into its holder to automatically start printing. You can transfer the results to a PC to allow long term storage, full page printout and PDF creation for EMR integration.

Compatible to Sessions: Get ready for fast data transfer!

Use the touchTymp MI 36 with our intuitive data transfer solution Sessions, for easy management and visualization of your immittance measurements.

TECHNICAL SPECIFICATION Tympanometry

Probe Frequency - 226 Hz ± 1 %, 85 dBSPL ± 1.5 dB, 678 Hz ± 1%, 72 dBSPL ± 1.5 dB, 800 Hz ± 1%, 70.5 dBSPL ± 1.5 dB
Optional High Frequency - 1 kHz ± 1%, 69 dBSPL ± 1.5 dB
Pressure Range - -600 to + 400 daPa
Accuracy of Pressure - ± 5 % or ± 10 daPa
Volume Range - 0.0 to 6.0 ml (compensated)
Compliance Range - 0.1 to 8.0 ml at 226 Hz, 0.1 to 15.0 mmho at 678, 800 and 1000 Hz
Accuracy of Volume - ± 5 % or 0.1 ml
Test Time Measurement - 3 - 5 seconds

Acoustic Reflexes

Test Frequencies - 0.5, 1, 2, 4 kHz ± 1 %
Test Noise - BB, LP, HP
Test Methods - Ipsilateral, contralateral
Level Ipsilateral - 70 to 105 dBHL
Level Contralateral - 70 to 120 dBHL
Level Setting - Automatic, fxed
Ipsilateral Reﬂex - Test With AGC

Reflex Decay

Standard - Probe frequency 226 Hz
Test Frequencies - 0.5, 1, 2, 4 kHz ± 1 %
Test Noise - BB, LP, HP
Level Ipsilateral - 70 to 105 dBHL
Level Contralateral - 70 to 120 dBHL

Eustachian Tube Function

Test Methods - Intact and perforated
Pressure Range - -600 to + 400 daPa

Audiometry

Test Signals - Sinus and warble tone, (pulsed and continuous)
Test Frequencies - 125, 250, 500, 750, 1000, 1500, 2000, 3000, 4000, 6000, 8000 Hz (125 Hz excluded
from bone conduction test frequencies)
Level Steps - 5 or 1 dB
Hearing Level Range AC - -10 to 120 dBHL
Hearing Level Range BC - -10 to 80 dBHL
Masking Noise - Narrow band and white noise

Device General

Display - 10.4" Graphic LED-Display with resistive touchscreen
PC Interface - USB
Probe - Lightweight diagnostic Shoulder-Box with built-in control light and switch
Printer - Fast 4 inch thermal printer
Power Supply - Mains 100 to 240 V~ ± 10 %, 50 - 60 Hz ± 10 %
Dimensions / Weight - W 30 x D 34.5 x H 14.8 cm / 3.2 kg
Languages - English, German, Spanish, French, Polish, Turkish, Russian, Chinese

Click Here To Download Catalogue

Features:

Made of medical grade Silicone, have good biocompatibility, non-toxic.
Exclusive soft seal cuff can be insert comfortable, minimizing potential trauma and increasing sealing.
Strengthen neck and tip eases insertion and prevents folds.
Kink-free tube eliminates the risk of airway tube occlusion.
Have different size, suitable for neonate, infant, child and adult.
Different color cuff, different material cuff, with aperture bar or not.
Reusable types must be cleaned and disinfected or sterilizated before use only 40 times.

Bistos BT - 720 Patient Monitor: Bistos Portable Patient Vital Signs Monitor, SpO2, Pulse, *NIBP, BT-720. The Bistos BT-720 is a compact size vital signs monitor with the standard parameters of SpO2 and Pulse. You can also add the NIBP and/or Masimo SpO2 at an additional cost. The BT-720 has a 4.3" color touch screen The PC software allows the vital signs information to be transferred and analyzed on a computer. Features:

3" color touch screen
Standard Confirgurations: SpO2 and Pulse
Optioal NIBP and Masimo SpO2
Short/long trend graphic/trend table display
Audio and visual alarm, adjustable alarm limit
Automatic brightness adjustment
Accurate SpO2 reading during motion or low perfusion
Perfusion index data / bar graphic display
Pitch tone variation for pulse rate
Internal memory for data storage
SD card for easy software upgrade
Over 8 hours of operation with the re-chargeable li-ion battery
PC software for data review and analysis on a computer

Technical Specifications:

Model			BT-720
Display			4.3" Color LCD Touch Screen
SpO2	Measurement Range		0-100%
	Accuracy (70-100%)	Adult/Pediatric	+/- 2%
	Accuracy (70-100%)	Neonate	+/- 3%
	Accuracy (0-69%)		Unspecified
	Perfusion Index		0.05-20%
Pulse Rate	Range (bpm)		25-250
NIBP* (Optional)	Method		Automatic Oscillometric
	Operation Mode		Manual/Automatic/STAT
	Parameter		Systolic/Diastolic/Mean
	Systolic Range (mmHg)	Adult	40-270
		Pediatric	40-200
		Neonate	40-130
	Diastolic Range	Adult	100-210
		Pediatric	100-160
		Neonate	10-90
	Mean Range	Adult	20-230
		Pediatric	20-175
		Neonate	20-100
SpO2 Masimo* (Optional)			Masimo SpO2
Battery	Type (Capacity)		Li-ion (4400mAh)
	Run time		8 Hours
	Charging Time		8 Hours
Interface			RJ45, SD Card Slot
Warranty			2 Years