Adjustable Kids Sand Table

Full Description

The Adjustable Kids Sand Table is a specialised occupational-therapy table intended for upper-limb and joint mobility training in children. By combining sensory sand play with functional movement and progressive difficulty via attached accessories, the table promotes coordination, muscle strength and fine motor control.

It is ideal for use in rehabilitation centres, paediatric hospital wards, children’s OT clinics and special-education settings. Because the height and angle of the table can be adjusted, therapists can fine-tune the challenge to the individual child’s needs—whether seated or standing or working at a customised tilt.

Key Features

• Multi-level hinge and adjustment mechanism allow the desktop to vary in height and tilt.

• Stable steel frame with crossbars on four sides and bottom, plus adjustable feet with non-slip rubber pads, for good stability and safety.

• Desktop (sand tray board) made of wood (or wood composite) covered with a durable surface, plastic-edged for safe handling.

• Four solid-wood accessories included: designed for push-pull and manipulation tasks in the sand to train shoulder, elbow, wrist and finger joint function.

• Tilt angle: 0° (horizontal) up to approximately 40°–50° for increased difficulty when the tray is inclined.

• Measuring range - adult: 0-300 mmHg,  pediatric: 0-150 mmHg
• Pressure sensor - yes
• Battery - up to 168 hours (exam every 30 minutes)
• Memory - 1000 examination
• Measurement periods - 6
• Activity / sleep definition - yes
• Operating mode - adult / pediatric
• Stationary work - USB powered only and manual control
• Measurement recording schedule - yes (division into activity and sleep)
• Quick start of the recorder - yes
• Use - easy, programming without a computer
• Cooperation - ASPEL 508 ABPM or HolCARD CR-07 software
• Internal real time clock - yes
• Keyboard - yes, with event button
• Screen - OLED
• Work without batteries - yes, via USB cable
• Cuff pressure - numerical or graphic value
• Exam results - systolic, diasolic, mean and HR pressure
• Display of measurement errors - yes, in the form of warnings and codes
• Menu - extended, information data, quick start, exam results, factory reset, configuration
• Pressure gauge test function - yes
• Leak test function - yes
• Energy saving - yes
• Power - 4x battery AA, USB port: 5VDC
• Weight 0,190kg

• Adult cuff, medium
• Pressure cable
• Cuff and pressure cable connector
• Recorder bag with belt
• LR6 (AA) alkaline batteries - 4 pcs.
• Instruction manual

Click Here To Download Catalogue 

• dimensions: 220x153x55 mm (LxWxH)
• weight: < 0,6 kg
• recording of standard 12 ECG leads
• saving the ECG signal simultaneously from all the 12 leads during the automatic recording, together with the date and time of the examination, filter settings, examination recording time and, optionally, patient's data, in the internal memory
• printout of the automatic ECG recording from internal memory, in groups of three leads
• printout of the analysis, interpretation of automatic ECG examination
• display of 1, 3, 6 or 12 lead ECG recordings
• ECG printout in 1-, 3-, 6- or 12-channel modes
• attaching the name of the patient to the ECG printout
• LCD TFT (4,3", 480x282) touch screen
• membrane alphanumeric keyboard with functional keys
• graphical menu displayed on the screen for easy operation using keyboard
• automatic analysis and interpretation in compliance with EN 60601-2-25 (CSE database) - interpretation dependable on age & sex of a patient
• memory of the last automatic examinations, with a limit from 5 to 1000
• up to 130 automatic examinations in battery mode
• continuous heart rate (HR) measurement and display
• automatic detection of QRS complex
• adapted to direct operation on an open heart
• power line interference filter: 50 Hz, 60 Hz
• muscle interference filter; filters available: 25 Hz, 35 Hz, 45 Hz
• contour line filters; filters available: 0.15 Hz, 0.45 Hz, 0.75 Hz, 1.5 Hz
• detection of electrode detachment, independent for each channel
• selectable channel to detect heart rate
• thickness of the printing ECG waveforms line to choose from: normal or bold
• presentation of the curves in the standard layout or Cabrera layout
• multilingual menu
• external USB communication port to connect a PC and the CardioTEKA software, for real-time transmission of ECG signal
• acoustic signalling of detected beats
• protection against defibrillation pulse
• detection and presentation of stimulating pulses on printout
• automatic examination with the printout of patient data and clinic data
• battery power saving functions

• clamp electrodes (set of 4)
• chest electrodes (set of 6)
• KEKG-30R ECG cable
• medical power connector M12-15
• ECG paper RB1 58 mm wide (1 roll)
• ECG gel
• operation manual

Click Here To Catalogue Download 

• fully compatible with Microsoft Windows environment
• unbeatable tool for alternative placement of electrodes
• independent analysis of the ST segment in all recorded channels, the positioning of all measurement points is user-reconfigurable and may depend on heart rate
• simultaneous arrhythmia detection in all three channels
• automatic signal calibration independent in all channels assures the use of all dynamic range available
• detection, reviewing and editing capability in the qualitative assessment of VE, VT, Single SVE, PSVT, Pauses, Irregular Rhythm, VT, IVR, Brady - and Tachycardia, Couplets, ST-segment elevation and depression, Maximum, Minimum and averaged Heart Rates, artifacts
• validation tool for beat classification making the correction easy and effective
• tabular hourly summaries all quantitative results
• printing of all recorded ECG signal available

• 12-channel digital registration of the ECG signal
• 10-lead patient cable
• registration time: 48 hours or 7 days on SD card
• built-in the real time clock
• EVENT button
• pacemaker detection
• dimensions: 72x76x23 mm

Click Here To Download Catalogue

• TS-CSA-A (Vertical movement, 1.6m stroke, rail length 3x4meter) including HV cable 15m
• WBS-TA:  Vertical movement

1. V Stroke:1,450mm in Uprigh Bucky Position,
2. 1,526mm in Horizontal Bucky position.

• PBT-4 is a 4 way Floating Tabletop with. A large tabletop with extended travel enables all radiography studies with minimal patient movement. Fully fat tabletop without a frame on the edge makes cleanliness and odors free

• Power Rating - 32KW
• Generator - GXR-32S
• Rotor - Dual Speed Starter(DSS)
• Input Power - 400/480VAC, Three phase
• Line Frequency - 50/60Hz
• X-ray tube - DXT-12M, (0.6/1.2mm, 300kHU)
• Tube Voltage - 40 to 150kV, 1kV Step
• Tube Current – 10 to 640mA
• Output - 640mA@81kV,  500mA@104kV, 400mA@130kV, 320mA@150kV
• Time Range - 1ms to 10s
• mAs Range - 0.1 to 800mAs
• Reproducibility - Coe­cient of Variation : kV < 0.005, Time < 0.005,mAs < 0.01
• Accuracy - kV < ±(1%+1kV), mA < ±(3%+1mA), Time <±(1%+0.5ms), mAs < ±(3%+0.1mAs)
• Linearity - Coe­cient of Linearity < 0.01 : CL = (X1-X2)/(X1+X2), where X is mR/mAs
• Mechanical Parts:

1.   V Stroke:1,450mm in Upright Bucky
2. Position, 1,526mm in Horizontal Bucky position.

Click Here To Download Catalogue