View cart “JME-30 3 Delivery Bed with 3 Motors” has been added to your cart.

AGA- Phlebology table

Brands: AGA Sanitätsartikel

~~$0.00~~

Shipped From Abroad

Phlebology tables with a 2-piece tabletop, for phlebology and dermatology

The 2-piece vein treatment tables from AGA Sanitätsartikel were specially developed for phlebology and dermatology. They are equipped as standard with an electric motor for tilt adjustment. In the AGA-PHLEBO-LIFT, Article No.: VEKO-1060/EE, there is an electric motor for height adjustment in addition to the electric motor for tilt adjustment.

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Sku:

SF1033560130137-15

Brands:: AGA Sanitätsartikel

Description
Reviews (0)

Description

Features

If necessary, for example when a patient collapses, the phlebology tables can be adjusted from the almost vertical position (74°) to the horizontal position (0°) to the shock position (20° negative).
The stability and robustness is achieved by the gusset plates in the frame corners.
The base, which is equipped with levelling feet, in conjunction with the pull-out support rod, guarantees a high level of stability even under load, even in the almost vertical upholstered position.
The shock- and scratch-resistant covers on the column and base, like all other components, are easy to clean.
The two upholstery segments (headrest and main surface) each have a thickness of 64 mm.
The AGA-PHLEBO-MAT, Article No.: VEKO-1062/E, has a fixed working height (930 mm) in the horizontal upholstered position. The height adjustment cannot be retrofitted.
The AGA-PHLEBO-LIFT, Article No.: VEKO-1060/EE, is equipped with an electromotorized height adjustment (730 – 930 mm, measured in the horizontal upholstered position).
The height and tilt adjustments are done with maintenance-free and splash-proof and extremely quiet electric drives, controlled via foot switches (alternatively, at no extra charge, via a hand switch). The adjustment systems are equipped with key locks. Connection values per motor: 230V, 50/60 Hz., 3.7A, 850W, IPX4, v=11mm/s, 10,000N.
The head section can be adjusted continuously up to +40°and locked with a handle, using a clamping rod mechanism.

Technical data

	AGA-PHLEBO-LIFT	AGA-PHLEBO-MAT
Article number	VEKO-1060/EE	VEKO-1062/E
Frame	Lacquered
Length Headrest/main section	1,900 mm 500 / 1,400 mm
Width	620 mm (680 mm with standard rails)
Height adjustment	730 – 930 mm (electric motor)	–
Height	–	930 mm
Tilt adjustment	-20º / +74º (electric motor)
Upholstery segments	2 sections
Upholstery thickness	64 mm
Headrest adjustment	+40º (clamping rods)
Load capacity	150 kg

The standard configuration includes:

A pair of side-mounted standard surgical rails, dimensions 25 x 10 mm, made of CrNi steel, length 900 mm.
A pair of black ring armrests, including fastening clamps for standard surgical rails.
A removable footboard, dimensions 490 x 320 mm, thickness 15 mm, black, with anti-slip surface.
The foot switch(es).
A safety support rod that can be pulled out from the floor frame.
A cutout at the foot of the main section to make getting on and off easier.
A floor frame with levelling feet.

Accessories & additional options

Article No.	Description
A-2047	Arm support, swivel-mounted, black PU-foam arm shell, dimensions approx. 400 x 120 mm (L x W), with 2 Velcro fasteners to secure the arm to the shell, chrome-plated holder with attachment for standard rail.
FR-60	Heel rest, recommended for use when bandaging. The patient can place their heels on the roll, which is attached to the black footboard with Velcro fasteners giving the medical personnel both hands free to bandage the patient’s legs. Retrofitting is not possible.
KVG	Headrest adjustment via gas pressure spring (instead of clamping rod mechanism), can be operated with just one hand, release button located directly on the headboard cushion. Retrofitting is not possible.
LR/Z-50	Mobile base with central locking castor system, welded into the base frame (dimensions approx. 1,000 x 450 mm), consisting of 2 swivel and 2 fixed castors, Ø 50 mm, foot pedal with black cap located towards the head end. Retrofitting is not possible.
P-2065/A	Paper roll holder, with mounting hardware, chrome-plated, consisting of two mounting kits (square steel tube 30 x 30 x 2 mm, length approx. 150 mm), two brackets, two clamps and a paper roll holder bar (length 615 mm, Ø 20 x 1 mm), for mounting on the upholstery frame.
PEF-1043	Upholstered insert, to close the cutout at the foot end of the upholstered tabletop, see upholstery colours.
PG-220	Patient belt, dimensions 2,200 x 250 mm (L x W), sewn from synthetic leather, with Velcro closure (hook and loops straps), see upholstery colours.
WM-30	Protractor, made of CrNi steel, attached to either the right or left side of the upholstery/tabletop frame (please specify when placing your order). Retrofitting is not possible.

Reviews

There are no reviews yet.

Be the first to review “AGA- Phlebology table”

Quick Comparison

Settings AGA- Phlebology table remove Better Medical Electrical Hospital ICU Bed (5 Crank) remove Ceiling Mounted Nine (9) Halogen Bulbs remove Hydraulic Delivery Bed remove Ward Screen remove 16'' Surgeon Stool remove

Name AGA- Phlebology table remove Better Medical Electrical Hospital ICU Bed (5 Crank) remove Ceiling Mounted Nine (9) Halogen Bulbs remove Hydraulic Delivery Bed remove Ward Screen remove 16'' Surgeon Stool remove

Image

SKU SF1033560130137-15 SF1033560084-75 SF1033560084-156 SF1033560084-165 SF1033560084-42 SF1033560084-104

Rating

Price

~~$0.00~~

$594.00

~~$0.00~~

$53.20

$36.00

Stock

Availability

Add to cart

Description

Shipped From Abroad

Phlebology tables with a 2-piece tabletop, for phlebology and dermatology

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock

Sit position function
Hi-lo function
Abdomen auto-extension decompression
Backrest angle indicator
Whole bed angle indicator
Bumper wheels
Handset

Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock Ceiling 9-reflector luminescence shadowless lamp adopts light sources from different positions for focus, providing illumination for surgical operations and medical examination and reducing shadows produced by different parts of medical workers. Illumination can be adjusted according to practical requirements. The lamp is fit for lighting for surgical operations and medical examination in hospitals.

Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock This multi function obstetric table is designed and manufactured to meet the need of the medical enterprise. It is used for childbirth, gynecology surgical operation, examining and many other functions, including cesarean operation. The planks, basins and all outer shells are made of stainless steel, which makes nice appearance and easy cleaning and sterilizing.

Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock

Four winged screen is adjusted by castors.
The curtain is removable, attachable and washable.
Frame: stainless steel material.
Screen is able to be used in narrow are, owing to foldable wings system if necessary.
The sections of the screen could be as customized.
The size&color also as customized.

Delivery & Availability: Typically 2 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock The 4300 features a 5-star base with easy-rolling 2" casters and fingertip height adjustment. The 16" seat is made of 3" high density foam and covered with heavy gauge vinyl. Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Content

Features

If necessary, for example when a patient collapses, the phlebology tables can be adjusted from the almost vertical position (74°) to the horizontal position (0°) to the shock position (20° negative).
The stability and robustness is achieved by the gusset plates in the frame corners.
The base, which is equipped with levelling feet, in conjunction with the pull-out support rod, guarantees a high level of stability even under load, even in the almost vertical upholstered position.
The shock- and scratch-resistant covers on the column and base, like all other components, are easy to clean.
The two upholstery segments (headrest and main surface) each have a thickness of 64 mm.
The AGA-PHLEBO-MAT, Article No.: VEKO-1062/E, has a fixed working height (930 mm) in the horizontal upholstered position. The height adjustment cannot be retrofitted.
The AGA-PHLEBO-LIFT, Article No.: VEKO-1060/EE, is equipped with an electromotorized height adjustment (730 - 930 mm, measured in the horizontal upholstered position).
The height and tilt adjustments are done with maintenance-free and splash-proof and extremely quiet electric drives, controlled via foot switches (alternatively, at no extra charge, via a hand switch). The adjustment systems are equipped with key locks. Connection values per motor: 230V, 50/60 Hz., 3.7A, 850W, IPX4, v=11mm/s, 10,000N.
The head section can be adjusted continuously up to +40°and locked with a handle, using a clamping rod mechanism.

Technical data

	AGA-PHLEBO-LIFT	AGA-PHLEBO-MAT
Article number	VEKO-1060/EE	VEKO-1062/E
Frame	Lacquered
Length Headrest/main section	1,900 mm 500 / 1,400 mm
Width	620 mm (680 mm with standard rails)
Height adjustment	730 - 930 mm (electric motor)	-
Height	-	930 mm
Tilt adjustment	-20º / +74º (electric motor)
Upholstery segments	2 sections
Upholstery thickness	64 mm
Headrest adjustment	+40º (clamping rods)
Load capacity	150 kg

The standard configuration includes:

A pair of side-mounted standard surgical rails, dimensions 25 x 10 mm, made of CrNi steel, length 900 mm.
A pair of black ring armrests, including fastening clamps for standard surgical rails.
A removable footboard, dimensions 490 x 320 mm, thickness 15 mm, black, with anti-slip surface.
The foot switch(es).
A safety support rod that can be pulled out from the floor frame.
A cutout at the foot of the main section to make getting on and off easier.
A floor frame with levelling feet.

Accessories & additional options

Article No.	Description
A-2047	Arm support, swivel-mounted, black PU-foam arm shell, dimensions approx. 400 x 120 mm (L x W), with 2 Velcro fasteners to secure the arm to the shell, chrome-plated holder with attachment for standard rail.
FR-60	Heel rest, recommended for use when bandaging. The patient can place their heels on the roll, which is attached to the black footboard with Velcro fasteners giving the medical personnel both hands free to bandage the patient's legs. Retrofitting is not possible.
KVG	Headrest adjustment via gas pressure spring (instead of clamping rod mechanism), can be operated with just one hand, release button located directly on the headboard cushion. Retrofitting is not possible.
LR/Z-50	Mobile base with central locking castor system, welded into the base frame (dimensions approx. 1,000 x 450 mm), consisting of 2 swivel and 2 fixed castors, Ø 50 mm, foot pedal with black cap located towards the head end. Retrofitting is not possible.
P-2065/A	Paper roll holder, with mounting hardware, chrome-plated, consisting of two mounting kits (square steel tube 30 x 30 x 2 mm, length approx. 150 mm), two brackets, two clamps and a paper roll holder bar (length 615 mm, Ø 20 x 1 mm), for mounting on the upholstery frame.
PEF-1043	Upholstered insert, to close the cutout at the foot end of the upholstered tabletop, see upholstery colours.
PG-220	Patient belt, dimensions 2,200 x 250 mm (L x W), sewn from synthetic leather, with Velcro closure (hook and loops straps), see upholstery colours.
WM-30	Protractor, made of CrNi steel, attached to either the right or left side of the upholstery/tabletop frame (please specify when placing your order). Retrofitting is not possible.

Features:

Sit position function
Hi-lo function
Abdomen auto-extension decompression
Backrest angle indicator
Whole bed angle indicator
Bumper wheels
Handset

Technical Specifications:

Size: 2140*1000*440~770mm
Packing size: 223*107*50cm(honeycomb box)/1pc
Max. Loading: 250KG(550lb) in movement
Function: Backrest tilting From 0°to 75° ±5°
Footrest tilting From 0°to 40° ±5°
Reverse:14°±1°
Trendelenburg: 14°±1°

Standard Accessories:

4pcs 5”Taiwan castors with central brake system,
1 pair brake pedal,
4pcs PP side rails,
2pcs ABS head and foot board,
4pcs urine hooks,
1 set MOTECK motor system,
4pcs bumper wheels,
4pcs angle indicators,
1pc electric cable holder,
4pcs Dust cover Option: I.V pole, mattress, over bed table, bedside locker

Click Here To Download Catalogue

Ceiling 9-reflector luminescence shadowless lamp adopts light sources from different positions for focus, providing illumination for surgical operations and medical examination and reducing shadows produced by different parts of medical workers. Illumination can be adjusted according to practical requirements. The lamp is fit for lighting for surgical operations and medical examination in hospitals. Technical Specifications: Light Intensity: ≥100,000LX (At 1m Distance) Color Rendering Index: Ra ≥90 Color Temperature: 4000K±500K Main Voltage: AC 220V + 22V, 50/60Hz Bulb Voltage: AC24V Bulb Power Input Power: 280VA Rated Power Of Bulb: 25W Height For Installation: 280-320cm

This multi function obstetric table is designed and manufactured to meet the need of the medical enterprise. It is used for childbirth, gynecology surgical operation, examining and many other functions, including cesarean operation. The planks, basins and all outer shells are made of stainless steel, which makes nice appearance and easy cleaning and sterilizing.

Technical Specifications:

Table top dimension: length 1900mm, width 610mm
Min.& Max. table height: 660mm~910mm
Trendelenburg & reverse trendelenburg: reverse trend ≥ 10°, trend ≥15°
Back section turning: -10°~75°
Assist platform dimension: length 550mm, width 550mm
Arm rest swing out: ≥ 90°
Filth basin dimension:468×338×125mm(can be equipped with soft pipe)
Power: AC 220V 50HZ

Standard Accessories:

Waterproof cushion - 1 set
Waist grab handle - 1 pair
Leg holder - 1 pair
Filth basin - 1 piece
Arm rest - 1 pair
Foot switch - 1 piece
Clamp - 1 pair

Four winged screen is adjusted by castors.
The curtain is removable, attachable and washable.
Frame: stainless steel material.
Screen is able to be used in narrow are, owing to foldable wings system if necessary.
The sections of the screen could be as customized.
The size&color also as customized.

The 4300 features a 5-star base with easy-rolling 2" casters and fingertip height adjustment. The 16" seat is made of 3" high density foam and covered with heavy gauge vinyl.