View cart “Ward Screen” has been added to your cart.

AGA- Phlebology table

Brands: AGA Sanitätsartikel

~~$0.00~~

Shipped From Abroad

Phlebology tables with a 2-piece tabletop, for phlebology and dermatology

The 2-piece vein treatment tables from AGA Sanitätsartikel were specially developed for phlebology and dermatology. They are equipped as standard with an electric motor for tilt adjustment. In the AGA-PHLEBO-LIFT, Article No.: VEKO-1060/EE, there is an electric motor for height adjustment in addition to the electric motor for tilt adjustment.

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Sku:

SF1033560130137-15

Brands:: AGA Sanitätsartikel

Description
Reviews (0)

Description

Features

If necessary, for example when a patient collapses, the phlebology tables can be adjusted from the almost vertical position (74°) to the horizontal position (0°) to the shock position (20° negative).
The stability and robustness is achieved by the gusset plates in the frame corners.
The base, which is equipped with levelling feet, in conjunction with the pull-out support rod, guarantees a high level of stability even under load, even in the almost vertical upholstered position.
The shock- and scratch-resistant covers on the column and base, like all other components, are easy to clean.
The two upholstery segments (headrest and main surface) each have a thickness of 64 mm.
The AGA-PHLEBO-MAT, Article No.: VEKO-1062/E, has a fixed working height (930 mm) in the horizontal upholstered position. The height adjustment cannot be retrofitted.
The AGA-PHLEBO-LIFT, Article No.: VEKO-1060/EE, is equipped with an electromotorized height adjustment (730 – 930 mm, measured in the horizontal upholstered position).
The height and tilt adjustments are done with maintenance-free and splash-proof and extremely quiet electric drives, controlled via foot switches (alternatively, at no extra charge, via a hand switch). The adjustment systems are equipped with key locks. Connection values per motor: 230V, 50/60 Hz., 3.7A, 850W, IPX4, v=11mm/s, 10,000N.
The head section can be adjusted continuously up to +40°and locked with a handle, using a clamping rod mechanism.

Technical data

	AGA-PHLEBO-LIFT	AGA-PHLEBO-MAT
Article number	VEKO-1060/EE	VEKO-1062/E
Frame	Lacquered
Length Headrest/main section	1,900 mm 500 / 1,400 mm
Width	620 mm (680 mm with standard rails)
Height adjustment	730 – 930 mm (electric motor)	–
Height	–	930 mm
Tilt adjustment	-20º / +74º (electric motor)
Upholstery segments	2 sections
Upholstery thickness	64 mm
Headrest adjustment	+40º (clamping rods)
Load capacity	150 kg

The standard configuration includes:

A pair of side-mounted standard surgical rails, dimensions 25 x 10 mm, made of CrNi steel, length 900 mm.
A pair of black ring armrests, including fastening clamps for standard surgical rails.
A removable footboard, dimensions 490 x 320 mm, thickness 15 mm, black, with anti-slip surface.
The foot switch(es).
A safety support rod that can be pulled out from the floor frame.
A cutout at the foot of the main section to make getting on and off easier.
A floor frame with levelling feet.

Accessories & additional options

Article No.	Description
A-2047	Arm support, swivel-mounted, black PU-foam arm shell, dimensions approx. 400 x 120 mm (L x W), with 2 Velcro fasteners to secure the arm to the shell, chrome-plated holder with attachment for standard rail.
FR-60	Heel rest, recommended for use when bandaging. The patient can place their heels on the roll, which is attached to the black footboard with Velcro fasteners giving the medical personnel both hands free to bandage the patient’s legs. Retrofitting is not possible.
KVG	Headrest adjustment via gas pressure spring (instead of clamping rod mechanism), can be operated with just one hand, release button located directly on the headboard cushion. Retrofitting is not possible.
LR/Z-50	Mobile base with central locking castor system, welded into the base frame (dimensions approx. 1,000 x 450 mm), consisting of 2 swivel and 2 fixed castors, Ø 50 mm, foot pedal with black cap located towards the head end. Retrofitting is not possible.
P-2065/A	Paper roll holder, with mounting hardware, chrome-plated, consisting of two mounting kits (square steel tube 30 x 30 x 2 mm, length approx. 150 mm), two brackets, two clamps and a paper roll holder bar (length 615 mm, Ø 20 x 1 mm), for mounting on the upholstery frame.
PEF-1043	Upholstered insert, to close the cutout at the foot end of the upholstered tabletop, see upholstery colours.
PG-220	Patient belt, dimensions 2,200 x 250 mm (L x W), sewn from synthetic leather, with Velcro closure (hook and loops straps), see upholstery colours.
WM-30	Protractor, made of CrNi steel, attached to either the right or left side of the upholstery/tabletop frame (please specify when placing your order). Retrofitting is not possible.

Reviews

There are no reviews yet.

Be the first to review “AGA- Phlebology table”

Quick Comparison

AGA- Phlebology table remove Hydraulic Delivery Bed remove MS-45 Examination Couch with Drawer remove Auto loader Collapsible Stretcher remove One Crank Hospital Bed remove JME-30 3 Delivery Bed with 3 Motors remove

Name AGA- Phlebology table remove Hydraulic Delivery Bed remove MS-45 Examination Couch with Drawer remove Auto loader Collapsible Stretcher remove One Crank Hospital Bed remove JME-30 3 Delivery Bed with 3 Motors remove

Image

SKU SF1033560130137-15 SF1033560084-165 SF1033560008-23 SF1033560084-111 SF1033560084-120 SF1033560007

Rating

Price

~~$0.00~~

$385.50

$125.00

$1,375.00

Stock

Availability

Add to cart

Description

Shipped From Abroad

Phlebology tables with a 2-piece tabletop, for phlebology and dermatology

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock This multi function obstetric table is designed and manufactured to meet the need of the medical enterprise. It is used for childbirth, gynecology surgical operation, examining and many other functions, including cesarean operation. The planks, basins and all outer shells are made of stainless steel, which makes nice appearance and easy cleaning and sterilizing.

Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped from abroad MSC-45 Examination Couch with Drawer is a 4ZE Medical Furniture product designed for comfort during the medical examination session. Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock

Color:	Orange
Folded:	Folded
Certification:	ISO, FDA, CE
Material:	Aluminum
Number of Belts:	Four
Type:	Ambulance Stretcher

Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock

Product Size : 202*90*50cm
Head and foot frame made of stainless steel tube
Adjustable backrest , with one chrome plated crank
Under the bed with a store rack
Load bearing: 250kg;
Custom options: Functions, mattress , side rails , Accessories and Colors.
Knock down construction
Metal Type: Iron
Material: Metal

Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped from Abroad JME-30 3 Gynecological Examination Chair with 3 motors is a 4ZE Medical Furniture product designed for comfort during medical examination session. Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Content

Features

If necessary, for example when a patient collapses, the phlebology tables can be adjusted from the almost vertical position (74°) to the horizontal position (0°) to the shock position (20° negative).
The stability and robustness is achieved by the gusset plates in the frame corners.
The base, which is equipped with levelling feet, in conjunction with the pull-out support rod, guarantees a high level of stability even under load, even in the almost vertical upholstered position.
The shock- and scratch-resistant covers on the column and base, like all other components, are easy to clean.
The two upholstery segments (headrest and main surface) each have a thickness of 64 mm.
The AGA-PHLEBO-MAT, Article No.: VEKO-1062/E, has a fixed working height (930 mm) in the horizontal upholstered position. The height adjustment cannot be retrofitted.
The AGA-PHLEBO-LIFT, Article No.: VEKO-1060/EE, is equipped with an electromotorized height adjustment (730 - 930 mm, measured in the horizontal upholstered position).
The height and tilt adjustments are done with maintenance-free and splash-proof and extremely quiet electric drives, controlled via foot switches (alternatively, at no extra charge, via a hand switch). The adjustment systems are equipped with key locks. Connection values per motor: 230V, 50/60 Hz., 3.7A, 850W, IPX4, v=11mm/s, 10,000N.
The head section can be adjusted continuously up to +40°and locked with a handle, using a clamping rod mechanism.

Technical data

	AGA-PHLEBO-LIFT	AGA-PHLEBO-MAT
Article number	VEKO-1060/EE	VEKO-1062/E
Frame	Lacquered
Length Headrest/main section	1,900 mm 500 / 1,400 mm
Width	620 mm (680 mm with standard rails)
Height adjustment	730 - 930 mm (electric motor)	-
Height	-	930 mm
Tilt adjustment	-20º / +74º (electric motor)
Upholstery segments	2 sections
Upholstery thickness	64 mm
Headrest adjustment	+40º (clamping rods)
Load capacity	150 kg

The standard configuration includes:

A pair of side-mounted standard surgical rails, dimensions 25 x 10 mm, made of CrNi steel, length 900 mm.
A pair of black ring armrests, including fastening clamps for standard surgical rails.
A removable footboard, dimensions 490 x 320 mm, thickness 15 mm, black, with anti-slip surface.
The foot switch(es).
A safety support rod that can be pulled out from the floor frame.
A cutout at the foot of the main section to make getting on and off easier.
A floor frame with levelling feet.

Accessories & additional options

Article No.	Description
A-2047	Arm support, swivel-mounted, black PU-foam arm shell, dimensions approx. 400 x 120 mm (L x W), with 2 Velcro fasteners to secure the arm to the shell, chrome-plated holder with attachment for standard rail.
FR-60	Heel rest, recommended for use when bandaging. The patient can place their heels on the roll, which is attached to the black footboard with Velcro fasteners giving the medical personnel both hands free to bandage the patient's legs. Retrofitting is not possible.
KVG	Headrest adjustment via gas pressure spring (instead of clamping rod mechanism), can be operated with just one hand, release button located directly on the headboard cushion. Retrofitting is not possible.
LR/Z-50	Mobile base with central locking castor system, welded into the base frame (dimensions approx. 1,000 x 450 mm), consisting of 2 swivel and 2 fixed castors, Ø 50 mm, foot pedal with black cap located towards the head end. Retrofitting is not possible.
P-2065/A	Paper roll holder, with mounting hardware, chrome-plated, consisting of two mounting kits (square steel tube 30 x 30 x 2 mm, length approx. 150 mm), two brackets, two clamps and a paper roll holder bar (length 615 mm, Ø 20 x 1 mm), for mounting on the upholstery frame.
PEF-1043	Upholstered insert, to close the cutout at the foot end of the upholstered tabletop, see upholstery colours.
PG-220	Patient belt, dimensions 2,200 x 250 mm (L x W), sewn from synthetic leather, with Velcro closure (hook and loops straps), see upholstery colours.
WM-30	Protractor, made of CrNi steel, attached to either the right or left side of the upholstery/tabletop frame (please specify when placing your order). Retrofitting is not possible.

This multi function obstetric table is designed and manufactured to meet the need of the medical enterprise. It is used for childbirth, gynecology surgical operation, examining and many other functions, including cesarean operation. The planks, basins and all outer shells are made of stainless steel, which makes nice appearance and easy cleaning and sterilizing.

Technical Specifications:

Table top dimension: length 1900mm, width 610mm
Min.& Max. table height: 660mm~910mm
Trendelenburg & reverse trendelenburg: reverse trend ≥ 10°, trend ≥15°
Back section turning: -10°~75°
Assist platform dimension: length 550mm, width 550mm
Arm rest swing out: ≥ 90°
Filth basin dimension:468×338×125mm(can be equipped with soft pipe)
Power: AC 220V 50HZ

Standard Accessories:

Waterproof cushion - 1 set
Waist grab handle - 1 pair
Leg holder - 1 pair
Filth basin - 1 piece
Arm rest - 1 pair
Foot switch - 1 piece
Clamp - 1 pair

DETAILS • Headrest adjusted mechanically. • A wooden cabinet with wheels and 3 drawers located under the couch. • Width : 60 cm • Depth: 181 cm • Height: 70 cm

It is made of high-strength aluminum alloy thick-wall pipes.
The bed surface is made of foamed cushion and the adjustable back making the wounded feel comfortable.
This machine is very convenient.
One person is enough to send the patient to the ambulance car.
The mechanical foldaway legs are controlled by the handles on both ends of the stretcher and the legs can be folded under the stretcher automatically when loading into the vehicle.
The stretcher can be locked by the fixing devices when on the ambulance car.
This type of stretcher is characterized by its light-weighted,durable, safe usage and easy for sterilization.
The stretcher adopts stretcher trolley and stretcher to separate structure.
High position :1900*550*920mm
Low position :1900*550*260mm
Maximum angle of the back: 75°
Loading bearing: <=159kg
Net Weight: 43kg
Gross Weight: 49kg

Product Size : 202*90*50cm
Head and foot frame made of stainless steel tube
Adjustable backrest , with one chrome plated crank
Under the bed with a store rack
Load bearing: 250kg
Custom options: Functions, mattress , side rails , Accessories and Colors
Knock down construction
Metal Type: Iron
Material: Metal

DETAILS • Back rest and height adjusted by motor. • Trendelenburg adjusted by motor. • ABS under side plarform. • Detachable foot rest part. • Height adjustable polyurethane leg supports. • 2 pieces of support handles. • 1blood donar support handles. • Plastic wate bin. • Accessory rail son both sides. DIMENSIONS • Heighrange: min 72 cm, max 108 cm • Trendelenburg : 0-19⁰ • Reverse trendelenburg angle : 0 ⁰-10 ⁰ • Overall length: 178 cm • Width : 60 cm • Backresy angle: 60⁰ • Safe Working load:200 kg

Weight N/A N/A N/A N/A N/A N/A

Dimensions N/A N/A N/A N/A N/A N/A

Additional information