/

AGA- Phlebology table

$0.00

Shipped From Abroad

Phlebology tables with a 2-piece tabletop, for phlebology and dermatology

The 2-piece vein treatment tables from AGA Sanitätsartikel were specially developed for phlebology and dermatology. They are equipped as standard with an electric motor for tilt adjustment. In the AGA-PHLEBO-LIFT, Article No.: VEKO-1060/EE, there is an electric motor for height adjustment in addition to the electric motor for tilt adjustment.

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
SF1033560130137-15

Description

Features
  • If necessary, for example when a patient collapses, the phlebology tables can be adjusted from the almost vertical position (74°) to the horizontal position (0°) to the shock position (20° negative).
  • The stability and robustness is achieved by the gusset plates in the frame corners.
  • The base, which is equipped with levelling feet, in conjunction with the pull-out support rod, guarantees a high level of stability even under load, even in the almost vertical upholstered position.
  • The shock- and scratch-resistant covers on the column and base, like all other components, are easy to clean.
  • The two upholstery segments (headrest and main surface) each have a thickness of 64 mm.
  • The AGA-PHLEBO-MAT, Article No.: VEKO-1062/E, has a fixed working height (930 mm) in the horizontal upholstered position. The height adjustment cannot be retrofitted.
  • The AGA-PHLEBO-LIFT, Article No.: VEKO-1060/EE, is equipped with an electromotorized height adjustment (730 – 930 mm, measured in the horizontal upholstered position).
  • The height and tilt adjustments are done with maintenance-free and splash-proof and extremely quiet electric drives, controlled via foot switches (alternatively, at no extra charge, via a hand switch). The adjustment systems are equipped with key locks. Connection values per motor: 230V, 50/60 Hz., 3.7A, 850W, IPX4, v=11mm/s, 10,000N.
  • The head section can be adjusted continuously up to +40°and locked with a handle, using a clamping rod mechanism.

 

Technical data
AGA-PHLEBO-LIFT AGA-PHLEBO-MAT
Article number VEKO-1060/EE VEKO-1062/E
Frame Lacquered
Length
Headrest/main section
1,900 mm
500 / 1,400 mm
Width 620 mm
(680 mm with standard rails)
Height adjustment 730 – 930 mm
(electric motor)
Height 930 mm
Tilt adjustment -20º / +74º (electric motor)
Upholstery segments 2 sections
Upholstery thickness 64 mm
Headrest adjustment +40º (clamping rods)
Load capacity 150 kg
The standard configuration includes:
  • A pair of side-mounted standard surgical rails, dimensions 25 x 10 mm, made of CrNi steel, length 900 mm.
  • A pair of black ring armrests, including fastening clamps for standard surgical rails.
  • A removable footboard, dimensions 490 x 320 mm, thickness 15 mm, black, with anti-slip surface.
  • The foot switch(es).
  • A safety support rod that can be pulled out from the floor frame.
  • A cutout at the foot of the main section to make getting on and off easier.
  • A floor frame with levelling feet.
Accessories & additional options
Article No. Description
A-2047 Arm support, swivel-mounted, black PU-foam arm shell, dimensions approx. 400 x 120 mm (L x W), with 2 Velcro fasteners to secure the arm to the shell, chrome-plated holder with attachment for standard rail.
FR-60 Heel rest, recommended for use when bandaging. The patient can place their heels on the roll, which is attached to the black footboard with Velcro fasteners giving the medical personnel both hands free to bandage the patient’s legs.  Retrofitting is not possible.
KVG Headrest adjustment via gas pressure spring (instead of clamping rod mechanism), can be operated with just one hand, release button located directly on the headboard cushion. Retrofitting is not possible.
LR/Z-50 Mobile base with central locking castor system, welded into the base frame (dimensions approx. 1,000 x 450 mm), consisting of 2 swivel and 2 fixed castors, Ø 50 mm, foot pedal with black cap located towards the head end. Retrofitting is not possible.
P-2065/A Paper roll holder, with mounting hardware, chrome-plated, consisting of two mounting kits (square steel tube 30 x 30 x 2 mm, length approx. 150 mm), two brackets, two clamps and a paper roll holder bar (length 615 mm, Ø 20 x 1 mm), for mounting on the upholstery frame.
PEF-1043 Upholstered insert, to close the cutout at the foot end of the upholstered tabletop, see upholstery colours.
PG-220 Patient belt, dimensions 2,200 x 250 mm (L x W), sewn from synthetic leather, with Velcro closure (hook and loops straps), see upholstery colours.
WM-30 Protractor, made of CrNi steel, attached to either the right or left side of the upholstery/tabletop frame (please specify when placing your order). Retrofitting is not possible.

Reviews

There are no reviews yet.

Be the first to review “AGA- Phlebology table”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsAGA- Phlebology table removeDrip Stand removeInstrument Cabinet removeAuto loader Collapsible Stretcher removeOne Crank Hospital Bed remove16'' Surgeon Stool remove
NameAGA- Phlebology table removeDrip Stand removeInstrument Cabinet removeAuto loader Collapsible Stretcher removeOne Crank Hospital Bed remove16'' Surgeon Stool remove
Image
SKUSF1033560130137-15SF1033560084-67SF1033560084-166SF1033560084-111SF1033560084-120SF1033560084-104
Rating
Price

$0.00

$27.00

$154.00

$385.50

$125.00

$36.00

Stock
Availability
Add to cart

DescriptionShipped From Abroad
Phlebology tables with a 2-piece tabletop, for phlebology and dermatology
The 2-piece vein treatment tables from AGA Sanitätsartikel were specially developed for phlebology and dermatology. They are equipped as standard with an electric motor for tilt adjustment. In the AGA-PHLEBO-LIFT, Article No.: VEKO-1060/EE, there is an electric motor for height adjustment in addition to the electric motor for tilt adjustment.
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
In stock Drip Stand is a very simple, easy to adjust and maneuver product. Suitable for most healthcare environments, this drip stand is light in weight made of high-quality stainless steel. Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.In stock
  • The cabinet is made of cold-rolled armor plate
  • Upper cabinet is a mobile and adjustable partition
  • The base is made of stainless steel, anti-aging, anti-rust, erosion-resistant
  • Size: 960 x 400 x 1750mm
  • upper part with 2 glass door with lock, opened front,inner with adjustable shelves
  • lower part with a small cupboard , with lock
Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
In stock
Color: Orange
Folded: Folded
Certification: ISO, FDA, CE
Material: Aluminum
Number of Belts: Four
Type: Ambulance Stretcher
Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
In stock
  • Product Size : 202*90*50cm
  • Head and foot frame made of stainless steel tube
  • Adjustable backrest , with one chrome plated crank
  • Under the bed with a store rack
  • Load bearing: 250kg;
  • Custom options: Functions, mattress , side rails , Accessories and Colors.
  • Knock down construction
  • Metal Type: Iron
  • Material: Metal
Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
In stock The 4300 features a 5-star base with easy-rolling 2" casters and fingertip height adjustment. The 16" seat is made of 3" high density foam and covered with heavy gauge vinyl. Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Content
Features
  • If necessary, for example when a patient collapses, the phlebology tables can be adjusted from the almost vertical position (74°) to the horizontal position (0°) to the shock position (20° negative).
  • The stability and robustness is achieved by the gusset plates in the frame corners.
  • The base, which is equipped with levelling feet, in conjunction with the pull-out support rod, guarantees a high level of stability even under load, even in the almost vertical upholstered position.
  • The shock- and scratch-resistant covers on the column and base, like all other components, are easy to clean.
  • The two upholstery segments (headrest and main surface) each have a thickness of 64 mm.
  • The AGA-PHLEBO-MAT, Article No.: VEKO-1062/E, has a fixed working height (930 mm) in the horizontal upholstered position. The height adjustment cannot be retrofitted.
  • The AGA-PHLEBO-LIFT, Article No.: VEKO-1060/EE, is equipped with an electromotorized height adjustment (730 - 930 mm, measured in the horizontal upholstered position).
  • The height and tilt adjustments are done with maintenance-free and splash-proof and extremely quiet electric drives, controlled via foot switches (alternatively, at no extra charge, via a hand switch). The adjustment systems are equipped with key locks. Connection values per motor: 230V, 50/60 Hz., 3.7A, 850W, IPX4, v=11mm/s, 10,000N.
  • The head section can be adjusted continuously up to +40°and locked with a handle, using a clamping rod mechanism.
 
Technical data
AGA-PHLEBO-LIFT AGA-PHLEBO-MAT
Article number VEKO-1060/EE VEKO-1062/E
Frame Lacquered
Length Headrest/main section 1,900 mm 500 / 1,400 mm
Width 620 mm (680 mm with standard rails)
Height adjustment 730 - 930 mm (electric motor) -
Height - 930 mm
Tilt adjustment -20º / +74º (electric motor)
Upholstery segments 2 sections
Upholstery thickness 64 mm
Headrest adjustment +40º (clamping rods)
Load capacity 150 kg
The standard configuration includes:
  • A pair of side-mounted standard surgical rails, dimensions 25 x 10 mm, made of CrNi steel, length 900 mm.
  • A pair of black ring armrests, including fastening clamps for standard surgical rails.
  • A removable footboard, dimensions 490 x 320 mm, thickness 15 mm, black, with anti-slip surface.
  • The foot switch(es).
  • A safety support rod that can be pulled out from the floor frame.
  • A cutout at the foot of the main section to make getting on and off easier.
  • A floor frame with levelling feet.
Accessories & additional options
Article No. Description
A-2047 Arm support, swivel-mounted, black PU-foam arm shell, dimensions approx. 400 x 120 mm (L x W), with 2 Velcro fasteners to secure the arm to the shell, chrome-plated holder with attachment for standard rail.
FR-60 Heel rest, recommended for use when bandaging. The patient can place their heels on the roll, which is attached to the black footboard with Velcro fasteners giving the medical personnel both hands free to bandage the patient's legs.  Retrofitting is not possible.
KVG Headrest adjustment via gas pressure spring (instead of clamping rod mechanism), can be operated with just one hand, release button located directly on the headboard cushion. Retrofitting is not possible.
LR/Z-50 Mobile base with central locking castor system, welded into the base frame (dimensions approx. 1,000 x 450 mm), consisting of 2 swivel and 2 fixed castors, Ø 50 mm, foot pedal with black cap located towards the head end. Retrofitting is not possible.
P-2065/A Paper roll holder, with mounting hardware, chrome-plated, consisting of two mounting kits (square steel tube 30 x 30 x 2 mm, length approx. 150 mm), two brackets, two clamps and a paper roll holder bar (length 615 mm, Ø 20 x 1 mm), for mounting on the upholstery frame.
PEF-1043 Upholstered insert, to close the cutout at the foot end of the upholstered tabletop, see upholstery colours.
PG-220 Patient belt, dimensions 2,200 x 250 mm (L x W), sewn from synthetic leather, with Velcro closure (hook and loops straps), see upholstery colours.
WM-30 Protractor, made of CrNi steel, attached to either the right or left side of the upholstery/tabletop frame (please specify when placing your order). Retrofitting is not possible.
Drip Stand is a very simple, easy to adjust and maneuver product. Suitable for most healthcare environments, this drip stand is light in weight made of high-quality stainless steel. Use : Bedridden patients, Senior citizen care, Patients in coma Advantages :
  • High quality stainless steel construction
  • Properly electroplated for anti rust finish
  • Ball shaped castors for smooth movement
  • Provided with an infusion stand
  • Attached 4 pcs hook
  • Maximum load strength
  • Screw safety height adjustment
  • Light weight
   
  • The cabinet is made of cold-rolled armor plate
  • Upper cabinet is a mobile and adjustable partition
  • The base is made of stainless steel, anti-aging, anti-rust, erosion-resistant
  • Size: 960 x 400 x 1750mm
  • upper part with 2 glass door with lock, opened front,inner with adjustable shelves
  • lower part with a small cupboard , with lock
  • It is made of high-strength aluminum alloy thick-wall pipes.
  • The bed surface is made of foamed cushion and the adjustable back making the wounded feel comfortable.
  • This machine is very convenient.
  • One person is enough to send the patient to the ambulance car.
  • The mechanical foldaway legs are controlled by the handles on both ends of the stretcher and the legs can be folded under the stretcher automatically when loading into the vehicle.
  • The stretcher can be locked by the fixing devices when on the ambulance car.
  • This type of stretcher is characterized by its light-weighted,durable, safe usage and easy for sterilization.
  • The stretcher adopts stretcher trolley and stretcher to separate structure.
  • High position :1900*550*920mm
  • Low position :1900*550*260mm
  • Maximum angle of the back: 75°
  • Loading bearing: <=159kg
  • Net Weight: 43kg
  • Gross Weight: 49kg
  • Product Size : 202*90*50cm
  • Head and foot frame made of stainless steel tube
  • Adjustable backrest , with one chrome plated crank
  • Under the bed with a store rack
  • Load bearing: 250kg
  • Custom options: Functions, mattress , side rails , Accessories and Colors
  • Knock down construction
  • Metal Type: Iron
  • Material: Metal
The 4300 features a 5-star base with easy-rolling 2" casters and fingertip height adjustment. The 16" seat is made of 3" high density foam and covered with heavy gauge vinyl.
  • Seat Height:  16.5 in. (41.91 cm.)
  • Maximum Seat Height:  21.75 in. (55.25 cm.)
  • Seat Diameter:  16 in. (40.64 cm.)
  • Weight Capacity:  250 lbs. (113.40 kg.)
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • Rating
  • Price
  • Description
Click outside to hide the comparison bar
Compare