/

AGA- Phlebology table

$0.00

Shipped From Abroad

Phlebology tables with a 2-piece tabletop, for phlebology and dermatology

The 2-piece vein treatment tables from AGA Sanitätsartikel were specially developed for phlebology and dermatology. They are equipped as standard with an electric motor for tilt adjustment. In the AGA-PHLEBO-LIFT, Article No.: VEKO-1060/EE, there is an electric motor for height adjustment in addition to the electric motor for tilt adjustment.

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
SF1033560130137-15

Description

Features
  • If necessary, for example when a patient collapses, the phlebology tables can be adjusted from the almost vertical position (74°) to the horizontal position (0°) to the shock position (20° negative).
  • The stability and robustness is achieved by the gusset plates in the frame corners.
  • The base, which is equipped with levelling feet, in conjunction with the pull-out support rod, guarantees a high level of stability even under load, even in the almost vertical upholstered position.
  • The shock- and scratch-resistant covers on the column and base, like all other components, are easy to clean.
  • The two upholstery segments (headrest and main surface) each have a thickness of 64 mm.
  • The AGA-PHLEBO-MAT, Article No.: VEKO-1062/E, has a fixed working height (930 mm) in the horizontal upholstered position. The height adjustment cannot be retrofitted.
  • The AGA-PHLEBO-LIFT, Article No.: VEKO-1060/EE, is equipped with an electromotorized height adjustment (730 – 930 mm, measured in the horizontal upholstered position).
  • The height and tilt adjustments are done with maintenance-free and splash-proof and extremely quiet electric drives, controlled via foot switches (alternatively, at no extra charge, via a hand switch). The adjustment systems are equipped with key locks. Connection values per motor: 230V, 50/60 Hz., 3.7A, 850W, IPX4, v=11mm/s, 10,000N.
  • The head section can be adjusted continuously up to +40°and locked with a handle, using a clamping rod mechanism.

 

Technical data
AGA-PHLEBO-LIFT AGA-PHLEBO-MAT
Article number VEKO-1060/EE VEKO-1062/E
Frame Lacquered
Length
Headrest/main section
1,900 mm
500 / 1,400 mm
Width 620 mm
(680 mm with standard rails)
Height adjustment 730 – 930 mm
(electric motor)
Height 930 mm
Tilt adjustment -20º / +74º (electric motor)
Upholstery segments 2 sections
Upholstery thickness 64 mm
Headrest adjustment +40º (clamping rods)
Load capacity 150 kg
The standard configuration includes:
  • A pair of side-mounted standard surgical rails, dimensions 25 x 10 mm, made of CrNi steel, length 900 mm.
  • A pair of black ring armrests, including fastening clamps for standard surgical rails.
  • A removable footboard, dimensions 490 x 320 mm, thickness 15 mm, black, with anti-slip surface.
  • The foot switch(es).
  • A safety support rod that can be pulled out from the floor frame.
  • A cutout at the foot of the main section to make getting on and off easier.
  • A floor frame with levelling feet.
Accessories & additional options
Article No. Description
A-2047 Arm support, swivel-mounted, black PU-foam arm shell, dimensions approx. 400 x 120 mm (L x W), with 2 Velcro fasteners to secure the arm to the shell, chrome-plated holder with attachment for standard rail.
FR-60 Heel rest, recommended for use when bandaging. The patient can place their heels on the roll, which is attached to the black footboard with Velcro fasteners giving the medical personnel both hands free to bandage the patient’s legs.  Retrofitting is not possible.
KVG Headrest adjustment via gas pressure spring (instead of clamping rod mechanism), can be operated with just one hand, release button located directly on the headboard cushion. Retrofitting is not possible.
LR/Z-50 Mobile base with central locking castor system, welded into the base frame (dimensions approx. 1,000 x 450 mm), consisting of 2 swivel and 2 fixed castors, Ø 50 mm, foot pedal with black cap located towards the head end. Retrofitting is not possible.
P-2065/A Paper roll holder, with mounting hardware, chrome-plated, consisting of two mounting kits (square steel tube 30 x 30 x 2 mm, length approx. 150 mm), two brackets, two clamps and a paper roll holder bar (length 615 mm, Ø 20 x 1 mm), for mounting on the upholstery frame.
PEF-1043 Upholstered insert, to close the cutout at the foot end of the upholstered tabletop, see upholstery colours.
PG-220 Patient belt, dimensions 2,200 x 250 mm (L x W), sewn from synthetic leather, with Velcro closure (hook and loops straps), see upholstery colours.
WM-30 Protractor, made of CrNi steel, attached to either the right or left side of the upholstery/tabletop frame (please specify when placing your order). Retrofitting is not possible.

Reviews

There are no reviews yet.

Be the first to review “AGA- Phlebology table”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsAGA- Phlebology table removeAuto loader Collapsible Stretcher removePatient Trolley removeHospital Crash Cart Mst-ABS25 ABS Medical Emergency Nursing Trolley removeCeiling Mounted Nine (9) Halogen Bulbs removeJME-30 3 Delivery Bed with 3 Motors remove
NameAGA- Phlebology table removeAuto loader Collapsible Stretcher removePatient Trolley removeHospital Crash Cart Mst-ABS25 ABS Medical Emergency Nursing Trolley removeCeiling Mounted Nine (9) Halogen Bulbs removeJME-30 3 Delivery Bed with 3 Motors remove
ImageLinealife JME-30 Gynecological Examination Chair with 3 Motors
SKUSF1033560130137-15SF1033560084-111SF1033560084-97SF1033560084-121SF1033560084-156SF1033560007
Rating
Price

$0.00

$385.50

$235.00

$620.00

$0.00

$1,375.00

Stock
Availability
Add to cart

DescriptionShipped From Abroad
Phlebology tables with a 2-piece tabletop, for phlebology and dermatology
The 2-piece vein treatment tables from AGA Sanitätsartikel were specially developed for phlebology and dermatology. They are equipped as standard with an electric motor for tilt adjustment. In the AGA-PHLEBO-LIFT, Article No.: VEKO-1060/EE, there is an electric motor for height adjustment in addition to the electric motor for tilt adjustment.
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
In stock
Color: Orange
Folded: Folded
Certification: ISO, FDA, CE
Material: Aluminum
Number of Belts: Four
Type: Ambulance Stretcher
Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
In stock
Material: Metal
Type: Emergency Trolley
Folded: Unfolded
Using Ambient: Hospital
Numbers of Function: One-Function
Certification: CE, FDA, ISO13485
Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
In stock
  • Made of high-strength ABS material
  • One-piece ABS plastic top board with raised-edge design, covered transparent soft plastic glass.
  • With five drawers: two small size, two middle size and one big size, each inner with partitions which can be organized freely
  • One central lock or disposable seal for all drawers
  • With transfusion hooks on top and medical equipment holding board
  • ABS Medical Crash Cart with CPR Board for Patient with acute stroke
  • Pull-out silding typed writing shelf makes efficiency of space application
  • Four luxurious noiseless casters, two with brakes
Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
In stock Ceiling 9-reflector luminescence shadowless lamp adopts light sources from different positions for focus, providing illumination for surgical operations and medical examination and reducing shadows produced by different parts of medical workers. Illumination can be adjusted according to practical requirements. The lamp is fit for lighting for surgical operations and medical examination in hospitals.
Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped from Abroad JME-30 3 Gynecological Examination Chair with 3 motors is a 4ZE Medical Furniture product designed for comfort during medical examination session. Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Content
Features
  • If necessary, for example when a patient collapses, the phlebology tables can be adjusted from the almost vertical position (74°) to the horizontal position (0°) to the shock position (20° negative).
  • The stability and robustness is achieved by the gusset plates in the frame corners.
  • The base, which is equipped with levelling feet, in conjunction with the pull-out support rod, guarantees a high level of stability even under load, even in the almost vertical upholstered position.
  • The shock- and scratch-resistant covers on the column and base, like all other components, are easy to clean.
  • The two upholstery segments (headrest and main surface) each have a thickness of 64 mm.
  • The AGA-PHLEBO-MAT, Article No.: VEKO-1062/E, has a fixed working height (930 mm) in the horizontal upholstered position. The height adjustment cannot be retrofitted.
  • The AGA-PHLEBO-LIFT, Article No.: VEKO-1060/EE, is equipped with an electromotorized height adjustment (730 - 930 mm, measured in the horizontal upholstered position).
  • The height and tilt adjustments are done with maintenance-free and splash-proof and extremely quiet electric drives, controlled via foot switches (alternatively, at no extra charge, via a hand switch). The adjustment systems are equipped with key locks. Connection values per motor: 230V, 50/60 Hz., 3.7A, 850W, IPX4, v=11mm/s, 10,000N.
  • The head section can be adjusted continuously up to +40°and locked with a handle, using a clamping rod mechanism.
 
Technical data
AGA-PHLEBO-LIFT AGA-PHLEBO-MAT
Article number VEKO-1060/EE VEKO-1062/E
Frame Lacquered
Length Headrest/main section 1,900 mm 500 / 1,400 mm
Width 620 mm (680 mm with standard rails)
Height adjustment 730 - 930 mm (electric motor) -
Height - 930 mm
Tilt adjustment -20º / +74º (electric motor)
Upholstery segments 2 sections
Upholstery thickness 64 mm
Headrest adjustment +40º (clamping rods)
Load capacity 150 kg
The standard configuration includes:
  • A pair of side-mounted standard surgical rails, dimensions 25 x 10 mm, made of CrNi steel, length 900 mm.
  • A pair of black ring armrests, including fastening clamps for standard surgical rails.
  • A removable footboard, dimensions 490 x 320 mm, thickness 15 mm, black, with anti-slip surface.
  • The foot switch(es).
  • A safety support rod that can be pulled out from the floor frame.
  • A cutout at the foot of the main section to make getting on and off easier.
  • A floor frame with levelling feet.
Accessories & additional options
Article No. Description
A-2047 Arm support, swivel-mounted, black PU-foam arm shell, dimensions approx. 400 x 120 mm (L x W), with 2 Velcro fasteners to secure the arm to the shell, chrome-plated holder with attachment for standard rail.
FR-60 Heel rest, recommended for use when bandaging. The patient can place their heels on the roll, which is attached to the black footboard with Velcro fasteners giving the medical personnel both hands free to bandage the patient's legs.  Retrofitting is not possible.
KVG Headrest adjustment via gas pressure spring (instead of clamping rod mechanism), can be operated with just one hand, release button located directly on the headboard cushion. Retrofitting is not possible.
LR/Z-50 Mobile base with central locking castor system, welded into the base frame (dimensions approx. 1,000 x 450 mm), consisting of 2 swivel and 2 fixed castors, Ø 50 mm, foot pedal with black cap located towards the head end. Retrofitting is not possible.
P-2065/A Paper roll holder, with mounting hardware, chrome-plated, consisting of two mounting kits (square steel tube 30 x 30 x 2 mm, length approx. 150 mm), two brackets, two clamps and a paper roll holder bar (length 615 mm, Ø 20 x 1 mm), for mounting on the upholstery frame.
PEF-1043 Upholstered insert, to close the cutout at the foot end of the upholstered tabletop, see upholstery colours.
PG-220 Patient belt, dimensions 2,200 x 250 mm (L x W), sewn from synthetic leather, with Velcro closure (hook and loops straps), see upholstery colours.
WM-30 Protractor, made of CrNi steel, attached to either the right or left side of the upholstery/tabletop frame (please specify when placing your order). Retrofitting is not possible.
  • It is made of high-strength aluminum alloy thick-wall pipes.
  • The bed surface is made of foamed cushion and the adjustable back making the wounded feel comfortable.
  • This machine is very convenient.
  • One person is enough to send the patient to the ambulance car.
  • The mechanical foldaway legs are controlled by the handles on both ends of the stretcher and the legs can be folded under the stretcher automatically when loading into the vehicle.
  • The stretcher can be locked by the fixing devices when on the ambulance car.
  • This type of stretcher is characterized by its light-weighted,durable, safe usage and easy for sterilization.
  • The stretcher adopts stretcher trolley and stretcher to separate structure.
  • High position :1900*550*920mm
  • Low position :1900*550*260mm
  • Maximum angle of the back: 75°
  • Loading bearing: <=159kg
  • Net Weight: 43kg
  • Gross Weight: 49kg
Material: Metal
Type: Emergency Trolley
Folded: Unfolded
Using Ambient: Hospital
Numbers of Function: One-Function
Certification: CE, FDA, ISO13485
Model NO.: BS-602
Condition: New
Castors: Taiwan Castor
Castor Lock: 4′ Silent Castors with 2 Skids.
Spare Part Warranty: 1 Year
Lifetime: More Than 10 Years
Certificate: Ce ISO FDA
Usage: Advanced Medical Motor System
Load Capacity: 250kgs
Trademark: Bossay
Transport Package: Export Standard Packing
Specification: 1900*630*800mm
Origin: China
HS Code: 94029000
  • Made of high-strength ABS material
  • One-piece ABS plastic top board with raised-edge design, covered transparent soft plastic glass.
  • With five drawers: two small size, two middle size and one big size, each inner with partitions which can be organized freely
  • One central lock or disposable seal for all drawers
  • With transfusion hooks on top and medical equipment holding board
  • ABS Medical Crash Cart with CPR Board for Patient with acute stroke
  • Pull-out silding typed writing shelf makes efficiency of space application
  • Four luxurious noiseless casters, two with brakes
Technical Specifications:
Model MST-ABS25
Material Strong ABS
Product Size 750X480X920mm
Layer No. 5 Layers
IV Pole 1 pc
Dust basket 2 pcs
Needle Disposal Holder 1 pc
File bin 1 set
Defibrillator shelf 1 set
Sliding side shelf 1 set
Power tank holder 1 set
Stainless steel guard rail 1 set
Transparent soft plastic glass 1 pc
Centralized lock 1 pc
Drawers  5 pcs
Luxurious noiseless casters 4 pcs
Package Size 780*520*1040mm
 
Ceiling 9-reflector luminescence shadowless lamp adopts light sources from different positions for focus, providing illumination for surgical operations and medical examination and reducing shadows produced by different parts of medical workers. Illumination can be adjusted according to practical requirements. The lamp is fit for lighting for surgical operations and medical examination in hospitals. Technical Specifications: Light Intensity: ≥100,000LX (At 1m Distance) Color Rendering Index: Ra ≥90 Color Temperature: 4000K±500K Main Voltage: AC 220V + 22V, 50/60Hz Bulb Voltage: AC24V Bulb Power Input Power: 280VA Rated Power Of Bulb: 25W Height For Installation: 280-320cmDETAILS • Back rest and height adjusted by motor. • Trendelenburg adjusted by motor. • ABS under side plarform. • Detachable foot rest part. • Height adjustable polyurethane leg supports. • 2 pieces of support handles. • 1blood donar support handles. • Plastic wate bin. • Accessory rail son both sides. DIMENSIONS • Heighrange: min 72 cm, max 108 cm • Trendelenburg : 0-19⁰ • Reverse trendelenburg angle : 0 ⁰-10 ⁰ • Overall length: 178 cm • Width : 60 cm • Backresy angle: 60⁰ • Safe Working load:200 kg  
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • Rating
  • Price
  • Description
Click outside to hide the comparison bar
Compare