AGA- Phlebology table

$0.00

Shipped From Abroad

Phlebology tables with a 3-piece tabletop, also for use as an examination chair

The 3-piece phlebology tables AGA-PHLEBO-LIFT and AGA-PHLEBO-MAT from AGA Sanitätsartikel can be used not only in phlebology and dermatology. They can be converted into a gynaecology, rectoscopy or proctology examination chair in just a few seconds. The 3-piece vein treatment tables are also equipped with an electric motor for tilt adjustment as standard. On the AGA-PHLEBO-LIFT, Article No.: VEKO-1060/3EE, there is a second electric motor for height adjustment in addition to the electric motor for tilt adjustment.

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
SF1033560130137-16

Description

  • If necessary, for example when a patient collapses, the phlebology tables can be adjusted from the almost vertical position (74°) to the horizontal position (0°) to the shock position (20° negative).
  • The stability and robustness is achieved by the gusset plates in the frame corners.
  • The base, which is equipped with levelling feet, guarantees a high level of stability, even in the almost vertical upholstery position, in conjunction with the pull-out support rod, even under stress.
  • The shockproof and scratch-resistant covers on the column and base, like all other components, are easy to clean.
  • The three upholstery segments (back, seat and foot sections) each have a thickness of 64 mm.
  • The AGA-PHLEBO-MAT, Article No.: VEKO-1062/3E, has a fixed working height (930 mm) in the horizontal upholstered position. The height adjustment cannot be retrofitted.
  • The AGA-PHLEBO-LIFT, Article No.: VEKO-1060/3EE, is also equipped with an electromotive height adjustment (730 – 930 mm, measured in the horizontal upholstered position).
  • The height and tilt adjustments are done with maintenance-free and splash-proof and extremely quiet electric drives, controlled via foot switches (alternatively, at no extra charge, via a hand switch). The adjustment systems are equipped with key locks. Connection values per motor: 230V, 50/60 Hz., 3.7A, 850W, IPX4, v=11mm/s, 10,000N.
  • The headrest can be adjusted continuously up to +30°, using a gas pressure spring.
  • Cutouts are incorporated into the seat and foot sections.

 

Technical data
AGA-PHLEBO-LIFT AGA-PHLEBO-MAT
Article number VEKO-1060/3EE VEKO-1062/3E
Frame Lacquered
Length
Back/seat/foot sections
1,900 mm
1,020 / 365 / 465 mm
Width 620 mm
(680 mm with standard rails)
Height adjustment 730 – 930 mm (electric motor)
Height 930 mm
Tilt adjustment -20º / +74º (electric motor)
Upholstery segments 3 sections
Upholstery thickness 64 mm
Back section adjustment +30º (gas pressure spring)
Load capacity 150 kg
Leg section adjustment Folding down using locking pins
The standard configuration includes:
  • A pair of side-mounted standard surgical rails, dimensions 25 x 10 mm, made of CrNi steel, length 900 mm.
  • A pair of black ring armrests, including fastening clamps for standard surgical rails.
  • A removable footboard, dimensions 490 x 320 mm, thickness 15 mm, black, with anti-slip surface.
  • The foot switch(es).
  • A safety support rod that can be pulled out from the floor frame.
  • A cutout at the foot of the leg section for easier getting on and off.
  • A floor frame with levelling feet.
  • A neck roll with two straps, fixed to the back cushion.
  • A cutout in the seat cushion for gynaecological examinations.
  • A safety limit switch to avoid damage caused by the folded leg section.

 

Accessories & additional options
Article No. Description
A-2047 Arm support, swivel-mounted, black PU-foam arm shell, dimensions approx. 400 x 120 mm (L x W), with 2 Velcro fasteners to secure the arm to the shell, chrome-plated holder with attachment for standard rail.
FR-60 Heel rest, recommended for use when bandaging. The patient can place their heels on the roll, which is attached to the black footboard with Velcro fasteners giving the medical personnel both hands free to bandage the patient’s legs.  Retrofitting is not possible.
LR/Z-50 Mobile base with central locking castor system, welded into the base frame (dimensions approx. 1,000 x 450 mm), consisting of 2 swivel and 2 fixed castors, Ø 50 mm, foot pedal with black cap located towards the head end. Retrofitting is not possible.
P-2065/A Paper roll holder, with mounting hardware, chrome-plated, consisting of two mounting kits (square steel tube 30 x 30 x 2 mm, length approx. 150 mm), two brackets, two clamps and a paper roll holder bar (length 615 mm, Ø 20 x 1 mm), for mounting on the upholstery frame.
PEF-1043 Upholstered insert, to close the cutout at the foot end of the upholstered tabletop, see upholstery colours.
PG-220 Patient belt, dimensions 2,200 x 250 mm (L x W), sewn from synthetic leather, with Velcro closure (hook and loops straps), see upholstery colours.
VA-40/V Stainless steel bowl, with holder and safety limit switch, dimensions approx. 300 x 200 x 65 mm, located directly under the seat section. Retrofitting is not possible.

Quick Comparison

SettingsAGA- Phlebology table removePipette Holder removePlastic Test Tube Rack removeOPTIKA B-382PL-ALC Binocular Brightfeld Microscope removeChemical Weighing Balance removeOptika B-69 Binocular Microscope remove
NameAGA- Phlebology table removePipette Holder removePlastic Test Tube Rack removeOPTIKA B-382PL-ALC Binocular Brightfeld Microscope removeChemical Weighing Balance removeOptika B-69 Binocular Microscope remove
ImageOPTIKA B-382PL-ALC Binocular Brightfeld MicroscopeOptika B-69 Binocular Microscope
SKUSF1033560130137-16SF1033560084-148SF1033560084-174SF1033560098-13SF1033560084-190SF1033560098-1
Price

$0.00

$0.00

$3.00

$0.00

$658.00

$0.00

Add to cart
DescriptionShipped From Abroad
Phlebology tables with a 3-piece tabletop, also for use as an examination chair
The 3-piece phlebology tables AGA-PHLEBO-LIFT and AGA-PHLEBO-MAT from AGA Sanitätsartikel can be used not only in phlebology and dermatology. They can be converted into a gynaecology, rectoscopy or proctology examination chair in just a few seconds. The 3-piece vein treatment tables are also equipped with an electric motor for tilt adjustment as standard. On the AGA-PHLEBO-LIFT, Article No.: VEKO-1060/3EE, there is a second electric motor for height adjustment in addition to the electric motor for tilt adjustment.
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
In stock The linear and round stands have been designed to fit perfectly of TOPTION Pipette range, TopPette,MicroPette and MicroPette Plus Autoclavable Pipettes. The stands are convenient to hold up 6 pipettes both of single and multi-channel.
Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
In stock
  • Sturdy high-impact plastic rack will hold from 6 to 31 test tubes up to 25mm in a diameter
  • Easy to assemble
  • Chemical resistant
Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped from Abroad The OPTIKA B-380 is an educational and laboratory microscope for routine applications. Dye-cast frame, with high stability and ergonomy, for transmitted light observation. Delivery & Availability: Typically 21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.In stock This is a 210g/0.001g Analytical electronic chemical balance for industrial and scientific field.
Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Ship from abroad Cordless, modern binocular microscope ideal for students and mainly primary schools with achromatic lenses (1000x), FN 18 eyepieces, finite optical system, coaxial focusing, StagErase™ eraseable mechanical stage, Abbe condenser and 1 W LED illumination with rechargeable batteries.
Delivery & Availability: Typically 21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Content
  • If necessary, for example when a patient collapses, the phlebology tables can be adjusted from the almost vertical position (74°) to the horizontal position (0°) to the shock position (20° negative).
  • The stability and robustness is achieved by the gusset plates in the frame corners.
  • The base, which is equipped with levelling feet, guarantees a high level of stability, even in the almost vertical upholstery position, in conjunction with the pull-out support rod, even under stress.
  • The shockproof and scratch-resistant covers on the column and base, like all other components, are easy to clean.
  • The three upholstery segments (back, seat and foot sections) each have a thickness of 64 mm.
  • The AGA-PHLEBO-MAT, Article No.: VEKO-1062/3E, has a fixed working height (930 mm) in the horizontal upholstered position. The height adjustment cannot be retrofitted.
  • The AGA-PHLEBO-LIFT, Article No.: VEKO-1060/3EE, is also equipped with an electromotive height adjustment (730 - 930 mm, measured in the horizontal upholstered position).
  • The height and tilt adjustments are done with maintenance-free and splash-proof and extremely quiet electric drives, controlled via foot switches (alternatively, at no extra charge, via a hand switch). The adjustment systems are equipped with key locks. Connection values per motor: 230V, 50/60 Hz., 3.7A, 850W, IPX4, v=11mm/s, 10,000N.
  • The headrest can be adjusted continuously up to +30°, using a gas pressure spring.
  • Cutouts are incorporated into the seat and foot sections.
 
Technical data
AGA-PHLEBO-LIFT AGA-PHLEBO-MAT
Article number VEKO-1060/3EE VEKO-1062/3E
Frame Lacquered
Length Back/seat/foot sections 1,900 mm 1,020 / 365 / 465 mm
Width 620 mm (680 mm with standard rails)
Height adjustment 730 - 930 mm (electric motor) -
Height - 930 mm
Tilt adjustment -20º / +74º (electric motor)
Upholstery segments 3 sections
Upholstery thickness 64 mm
Back section adjustment +30º (gas pressure spring)
Load capacity 150 kg
Leg section adjustment Folding down using locking pins
The standard configuration includes:
  • A pair of side-mounted standard surgical rails, dimensions 25 x 10 mm, made of CrNi steel, length 900 mm.
  • A pair of black ring armrests, including fastening clamps for standard surgical rails.
  • A removable footboard, dimensions 490 x 320 mm, thickness 15 mm, black, with anti-slip surface.
  • The foot switch(es).
  • A safety support rod that can be pulled out from the floor frame.
  • A cutout at the foot of the leg section for easier getting on and off.
  • A floor frame with levelling feet.
  • A neck roll with two straps, fixed to the back cushion.
  • A cutout in the seat cushion for gynaecological examinations.
  • A safety limit switch to avoid damage caused by the folded leg section.
 
Accessories & additional options
Article No. Description
A-2047 Arm support, swivel-mounted, black PU-foam arm shell, dimensions approx. 400 x 120 mm (L x W), with 2 Velcro fasteners to secure the arm to the shell, chrome-plated holder with attachment for standard rail.
FR-60 Heel rest, recommended for use when bandaging. The patient can place their heels on the roll, which is attached to the black footboard with Velcro fasteners giving the medical personnel both hands free to bandage the patient's legs.  Retrofitting is not possible.
LR/Z-50 Mobile base with central locking castor system, welded into the base frame (dimensions approx. 1,000 x 450 mm), consisting of 2 swivel and 2 fixed castors, Ø 50 mm, foot pedal with black cap located towards the head end. Retrofitting is not possible.
P-2065/A Paper roll holder, with mounting hardware, chrome-plated, consisting of two mounting kits (square steel tube 30 x 30 x 2 mm, length approx. 150 mm), two brackets, two clamps and a paper roll holder bar (length 615 mm, Ø 20 x 1 mm), for mounting on the upholstery frame.
PEF-1043 Upholstered insert, to close the cutout at the foot end of the upholstered tabletop, see upholstery colours.
PG-220 Patient belt, dimensions 2,200 x 250 mm (L x W), sewn from synthetic leather, with Velcro closure (hook and loops straps), see upholstery colours.
VA-40/V Stainless steel bowl, with holder and safety limit switch, dimensions approx. 300 x 200 x 65 mm, located directly under the seat section. Retrofitting is not possible.
The linear and round stands have been designed to fit perfectly of TOPTION Pipette range, TopPette,MicroPette and MicroPette Plus Autoclavable Pipettes. The stands are convenient to hold up 6 pipettes both of single and multi-channel. Features:
  • Lightweight, fashion design
  • Can be rotating smoothly  comfortably hold up to 6 pipettes
  • Comfortably hold up to 6 pipettes
Technical Specifications:
Feature: Disposable
Application: Clinical, Household
Material: Plastic
Certification: CE
Group: Adult
Color: White and Gray
 
  • Sturdy high-impact plastic rack will hold from 6 to 31 test tubes up to 25mm in a diameter
  • Easy to assemble
  • Chemical resistant
Observation mode: Brightfield. Head: Binocular, 30° inclined, 360° rotating (when ALC cable is unplugged). Interpupillary distance: Adjustable between 48 and 75 mm. Dioptric adjustment: On the left eyepiece tube. Eyepieces: WF10x/20 mm, high eye-point and secured by screw. Nosepiece: Quintuple revolving nosepiece, rotation on ball bearings. Objectives: N-PLAN 4x/0.10 N-PLAN 10x/0.25 N-PLAN 40x/0.65 N-PLAN 100x/1.25 (Oil/Water) All with anti-fungus treatment. Specimen stage: Double layer rackless mechanical stage, 150×139 mm, 75×33 mm X-Y range. Focusing: Coaxial coarse (adjustable tension) and fine focusing mechanism with limit stop to prevent the contact between objective and specimen. Condenser: Abbe N.A. 1.25, with objective-coded iris diaphragm, focusable and centerable. Illumination (Fixed Koehler type): X-LED3 with white 3.6 W LED (6,300K) and brightness control. ALC system. Multi-plug 100-240Vac/6Vdc external power supply.  
Click Here To Download Catalogue
This is a 210g/0.001g Analytical electronic chemical balance for industrial and scientific field.
  • Specifications: 110g/0.001g, 210g/0.001g
  • Sensor’s Technology method: Strain gauge
  • Stainless steel pan size: ø90mm
  • Minimum weighing value: 0.003g
  • Resolution: 0.001g
  • Linearity: ±0.003g
  • Stabilization time: ≤ 2S
  • Sensitivity drift: ±0.003g
  • Weighing Units: g, oz, ct, mg
  • Operating Temperature: 17 C - 25  degree
  • Display Refresh time: 0.3 secs
  • External calibration weight free with scale: 100g, 200g
  • Counting feature: Yes
 
  • Display: LCD
  • Wind proof (shield) dimension: 170*190*170mm
  • Outlook size: 270*195*285mm
  • Operation Key: ON/OFF, COUNT, ENTER, CAL, UNIT
  • Power: AC 220V 50Hz
  • Main parts: Cast Aluminum, wind proof, Calibration weight
  • Optional part: RS232, Printer
 
  • Inner packing: 415*285*430mm
  • Outer packing:475*315*485mm
  • N.W.: 4kg
  • G.W.: 7kg
Cordless, modern binocular microscope ideal for students and mainly primary schools with achromatic lenses (1000x), FN 18 eyepieces, finite optical system, coaxial focusing, StagErase™ eraseable mechanical stage, Abbe condenser and 1 W LED illumination with rechargeable batteries. Slim and easy to carry, it is equipped with arm/wrist rest support to reduce the fatigue during use and long lasting LED illumination to provide over 20 years of use. Features:
  • Observation mode: Brightfield.
  • Head: Binocular, 30° inclined; 360° rotating.
  • Dioptric adjustment: Left eyepiece.
  • Eyepiece: WF10x/18 mm, secured by screw
  • Nosepiece: Quadruple ball bearings revolving nosepiece, reversed.
  • Objectives: – Achromatic 4x/0.10, with anti-fungus treatment – Achromatic 10x/0.25, with anti-fungus treatment – Achromatic 40x/0.65, with anti-fungus treatment – Achromatic 100x/1.25 (oil), with anti-fungus treatment
  • Specimen stage: StagErase™ eraseable mechanical stage, 125×125 mm, 62×24 mm X-Y movement range. Vernier scale on the two axes, accuracy: 0.1 mm.
  • Focusing: Coaxial coarse and fine focusing mechanism with limit stop to prevent the contact between objective and specimen.
  • Condenser: Abbe N.A. 1.25, pre-centered, focusable, with iris diaphragm.
  • Illumination: 1 W LED, with brightness control, rechargeable batteries.
  • Color temperature: 6,300 K. Multi-plug 100-240Vac/5Vdc external power supply.
  Technical Specifications:
Observation Method - Transmitted Light Brightfield Yes
  Simple polarized light As optional
Main Body Type Upright
  Construction material Aluminum die-cast
  Trasportation handle Yes
Head Type Binocular (Siedentopf)
  Inclination 30°
  360° rotating Yes
  Interpupillary distance (mm) 55-75
  Dioptric adjustement On left tube
  Fixing screw for eyepieces Yes
  Tube inner diameter (mm) 23
Eyepieces Field number (mm) 18
  Magnification 10x
  Pointer As optional
  Micrometric scale As optional
Nosepiece Positions Quadruple
  Reversed Yes
  Bi-directional Yes
  Rotation on ball bearings Yes
  Objective thread RMS
Objectives Optical system 160
  Anti-fungus treatment Yes
  Parfocal distance (mm) 35
  Standard magnifications 40x-1000x
  Type Achromatic
  4x/0.10, W.D. 10.6 mm
  10x/0.25, W.D. 7.0 mm
  40x/0.65, W.D. 0.5 mm
  100x/1.25 (Oil), W.D. 0.13 mm
Stage Type Double layer
  Dimensions (mm) 125x125
  Moving mechanism Rack and pinion
  Moving range (mm) 62x24
  Material Anti-scratch painting
  Specimen holder Yes
  Slide number 1
  X-Y Vernier scale Yes
  Vernier scale accuracy (mm) 0.1
Condenser - Single Position Type Abbe
  Numerical aperture (N.A.) 1.25
  Diaphragms Iris
  Focusable By rotation
Focusing System Type Coaxial coarse & fine
  Coarse total travel (mm) 23
  Fine total travel (per single rotation) (mm) 1.2
  Fine graduations 100
  Fine resolution (µm) 12
  Upper stop to prevent contact Yes
Transmitted Illumination Type LED
  Light source power (W) 1
  Brightness control Manual
  Lifetime (hours) > 65,000
  Temperature (K) 6,300
  Max. required power (W) 1.5
Power Supply for Transmitted Illumination Type External
  Microscope connector Jack, 2.1 mm
  Power plug type Multi-plug (EU, UK, US)
  Input voltage 100/240 Vac, 50/60 Hz
  Output voltage 5 Vdc 500 mA
  Rechargeable batteries Yes
  Battery type Ni-MH (3x, AAA size)
  Working time of batteries (hours) 4
  Charging time of batteries (hours) 8
Accessories Included Dust cover Yes
  Immersion oil (10ml) Yes
  User Manual Digital version (downloadable)
Product Dimensions Height (mm) 330
  Width (mm) 135
  Depth (mm) 235
Product Weight (kg) 3.0
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
en English
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • Rating
  • Price
  • Description
Click outside to hide the comparison bar
Compare