Auto BIPAP VM-7 Machine

$0.00

Shipped From Abroad

The VentMed BiPAP VM7 is an automatic bi-level device that delivers effective therapy for a wide range of users noncompliant with traditional CPAP devices. It delivers two different values of air pressure, one for inhaling, another for exhaling, to hold a user’s upper airway open and help him/her breathe more effectively. The VentMed VM7 is a premium BiPAP for patients who have been diagnosed with severe sleep apnea.

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
SF1033560130180-11
Brands:: VentMed

Description

Key Features of Auto BIPAP VM-7:

Auto ON / OFF

Designed to make the device start automatically in a while after you wear mask, and stop the device work automatically in 10 seconds after you take mask away. The Auto ON/OFF function can be turned off on the menu.

 

Smart Ramp Settings

It lets the sleep apnea therapy start from a low and pleasant pressure level when the user is still awake. Then the air pressure is gradually ramped up to the correct level and the user can easily fall asleep without even noticing the increment.

Sleep Tracking

It comes with a TF card that will allow you to keep detailed data about your sleep disorder. The new TF card will allow you to store your sleep apnea information, which will enable you to get therapy support from your doctor, and compile compliance reports.

 

Alarm Setting

Designed to alarm when there is leakage. Can set as ON or OFF.

Whisper-Quiet

It is less than 26 decibels (dB), making it quieter than a whisper and comparable to leaves rustling.

Expiratory Pressure Relief

The VM7 BIAP automatically sets EPR (Expiratory Pressure Relief) function so you may find it easier to breathe out. This can help you get used to therapy.

You can set the expiratory pressure relief Level to off (0) or between 1 and 3, where 1 is the lowest expiratory pressure relief and 3 is the highest setting.

 

Heated Humidifier

The humidifier moistens the air and is designed to make therapy more comfortable. You can set the Humidity Level to off (0) or between 1 and 5, where 1 is the lowest humidity setting and 5 is the highest humidity setting.

The push-pull water tank design is very easy to disassemble and install, which is convenient for adding water and cleaning.

ST Mode & Backup Rate (BUR)

A BPM value (Breaths per Minute) can be set as a backup rate in ST Mode. If the user’s spontaneous respiratory rate falls below that value, the device will add pressure to prompt him/her to breathe.

With the machine intervening in the breathing, it can help the user inhale and exhale more easily during challenging conditions, lowering respiratory muscle workload. It can also get the user more oxygen and reduce CO2 in the user’s bloodstream.

Specifications
Product Name
BIPAP VM-7
Material
ABS+plastic
Color
Black
Work mode
CPAP,Auto,Auto S, S,T,ST
Sound
<28db
Data storage
TF card
Screen
2.8 inch color
Pressure Range
4-25cmH2O
Power supply
Input100-240V.50-60Hz,1-2A; Output+24V,2.5V
Over-temperature protection
Stop working automatically,
buzzle ring 4 times
Ramp item 
0-60min adjustable  1 min/step
Auto ON/OFF
Yes
EPR
Yes,0-3 level
Auto-Altitude
Yes
Leak compensation
Yes
Awake detection
Yes
Breath Event detection
Yes
Auto pressure titration
Yes
Water Capacity
200ML max
Humidifier
Heated Humidifier,0-5 level
Mask /power Off Alarm
Yes
Dimensions
29L*15W*10H(machine);
38.5L*36.5W*16H(carton)
Weight(With humidifier)
1.8KG(Net weight);4KG(Gross weight)
work for
OSA /CSA /MSA/ Hypopnea/ COPD

Reviews

There are no reviews yet.

Be the first to review “Auto BIPAP VM-7 Machine”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsAuto BIPAP VM-7 Machine removeTimesco Jumper Fingertip Pulse Oximeter removeASPEL AsCARD Green B/W ECG Machine removeASPEL AsCARD Grey ECG Machine removeSonoscape P20 Ultrasound Machine removeSonoscape P10 Ultrasound Machine remove
NameAuto BIPAP VM-7 Machine removeTimesco Jumper Fingertip Pulse Oximeter removeASPEL AsCARD Green B/W ECG Machine removeASPEL AsCARD Grey ECG Machine removeSonoscape P20 Ultrasound Machine removeSonoscape P10 Ultrasound Machine remove
ImageFingertip Pulse OximeterASPEL AsCARD Green B/W ECG MachineASPEL AsCARD Grey ECG Machine
SKUSF1033560130180-11SF1033560084-2SF1033560075-8SF1033560075-5SF1033560012-9SF1033560012-7
Rating
Price

$0.00

$17.00

$0.00

$1,166.00

$0.00

$9,350.00

Stock
Availability
Add to cart

DescriptionShipped From Abroad The VentMed BiPAP VM7 is an automatic bi-level device that delivers effective therapy for a wide range of users noncompliant with traditional CPAP devices. It delivers two different values of air pressure, one for inhaling, another for exhaling, to hold a user’s upper airway open and help him/her breathe more effectively. The VentMed VM7 is a premium BiPAP for patients who have been diagnosed with severe sleep apnea.
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
In Stock Integrated with SPO2 probe and processing display module. Small in volume、light in weight and convenient in carrying. Operation of the product is simple ,low power consumption. SPO2 , PR and Ridisplay,. Pulse rate value display, bar graph display. Low-voltage indication: low-voltage indicator appears before working abnormally which is due to low-voltage. Automatically power off function: when the device is under the state of measuring interface . it will automatically power off within 5 seconds if the finger falls out of probe. Delivery & Availability: Typically 2 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.Shipped from Abroad AsCARD Green electrocardiograph is a 1- and 3-channel ECG unit which enables to make electrocardiogram in full 12 leads. Intended for ECG examinations of adult and paediatric patients aimed at identification of cardiological abnormalities, myocardial ischaemia or infarction. The device is intended for use in healthcare facilities by duly trained personnel. ECG examination may be recorded in manual or automatic mode with the ability to perform the analysis and interpretation. Delivery & Availability: Typically 10 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.Shipped from Abroad Electrocardiograph AsCARD Grey v.07.225 - is a 1, 3, 6, 12 channel ECG unit which enables to make electrocardiogram in full 12 leads. It is intended to conduct ECG examinations of adults and paediatric patients in all types of health care centres. ECG examination may be recorded in manual or automatic mode, with the possibility of analysis and interpretation. The device can be powered from 100 V ÷ 240 V mains supply or by an internal battery. Delivery & Availability: Typically 10 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.Shipped from Abroad Incorporating innovative technologies, P20’s user-friendly design with a simple operation panel, intuitive user interface and a variety of intelligent auxiliary scanning tools, will significantly improve your daily examination experience. Besides general imaging applications, P20 has entitled with diagnostic 4D technology which has an extraordinary performance in obstetrics and gynecology applications. Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped from Abroad The P10 color Doppler ultrasound system is a new generation product from SonoScape. It is designed to give high quality images, rich probe configurations, various clinical tools and automatic analysis software to provide you with comprehensive solutions for your growing demand for clinical applications. Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Content
Key Features of Auto BIPAP VM-7:
Auto ON / OFF Designed to make the device start automatically in a while after you wear mask, and stop the device work automatically in 10 seconds after you take mask away. The Auto ON/OFF function can be turned off on the menu.
  Smart Ramp Settings It lets the sleep apnea therapy start from a low and pleasant pressure level when the user is still awake. Then the air pressure is gradually ramped up to the correct level and the user can easily fall asleep without even noticing the increment.
Sleep Tracking It comes with a TF card that will allow you to keep detailed data about your sleep disorder. The new TF card will allow you to store your sleep apnea information, which will enable you to get therapy support from your doctor, and compile compliance reports.  
Alarm Setting Designed to alarm when there is leakage. Can set as ON or OFF. Whisper-Quiet It is less than 26 decibels (dB), making it quieter than a whisper and comparable to leaves rustling. Expiratory Pressure Relief The VM7 BIAP automatically sets EPR (Expiratory Pressure Relief) function so you may find it easier to breathe out. This can help you get used to therapy. You can set the expiratory pressure relief Level to off (0) or between 1 and 3, where 1 is the lowest expiratory pressure relief and 3 is the highest setting.  
Heated Humidifier The humidifier moistens the air and is designed to make therapy more comfortable. You can set the Humidity Level to off (0) or between 1 and 5, where 1 is the lowest humidity setting and 5 is the highest humidity setting. The push-pull water tank design is very easy to disassemble and install, which is convenient for adding water and cleaning.
ST Mode & Backup Rate (BUR)
A BPM value (Breaths per Minute) can be set as a backup rate in ST Mode. If the user’s spontaneous respiratory rate falls below that value, the device will add pressure to prompt him/her to breathe. With the machine intervening in the breathing, it can help the user inhale and exhale more easily during challenging conditions, lowering respiratory muscle workload. It can also get the user more oxygen and reduce CO2 in the user’s bloodstream.
Specifications
Product Name
BIPAP VM-7
Material
ABS+plastic
Color
Black
Work mode
CPAP,Auto,Auto S, S,T,ST
Sound
<28db
Data storage
TF card
Screen
2.8 inch color
Pressure Range
4-25cmH2O
Power supply
Input100-240V.50-60Hz,1-2A; Output+24V,2.5V
Over-temperature protection
Stop working automatically,
buzzle ring 4 times
Ramp item 
0-60min adjustable  1 min/step
Auto ON/OFF
Yes
EPR
Yes,0-3 level
Auto-Altitude
Yes
Leak compensation
Yes
Awake detection
Yes
Breath Event detection
Yes
Auto pressure titration
Yes
Water Capacity
200ML max
Humidifier
Heated Humidifier,0-5 level
Mask /power Off Alarm
Yes
Dimensions
29L*15W*10H(machine);
38.5L*36.5W*16H(carton)
Weight(With humidifier)
1.8KG(Net weight);4KG(Gross weight)
work for
OSA /CSA /MSA/ Hypopnea/ COPD
Integrated with SPO2 probe and processing display module • Small in volume, light in weight, convenient in carrying • Simple operation, lower power consumption • OLED screen display • SPO2, PR, bar graph of pulse, plethysmogram, blood perfusion index, battery indication display • 4 directions display, 6 display models, large fonts display • Brightness control, Demo mode, Setup menu • Movement interference • Alarm function and adjustable alarm parameters • Can be connected to mobile phones through Bluetooth; can support Android and iOS client • Auto power-off when no signal after 10s • Powered by 2*AAA alkaline batteries Specification: • Size: 62 x 37 x 32mm • Peak wavelength range of the light emitted from the probe: red light 660nm±3; infrared light 905nm±5 • Maximum optical output power of the probe: 1.2mW for infrared light (905nm) • Bluetooth module: 4.0 (single-mode) • Working temperature: 5℃ to 40℃ (41°F to 104°F) • Relative humidity: 15% to 80%, non-condensing • Atmospheric pressure: 70kPa to 106kPa • Rated voltage: DC 3V Package included: • 1 x JUMPER JPD-500F Bluetooth Fingertip Pulse Oximeter • 2 x AAA Batteries • 1 x Carry Case • 1 x Lanyard • 1 x English User ManualAsCARD Green electrocardiograph is a 1- and 3-channel ECG unit which enables to make electrocardiogram in full 12 leads. Intended for ECG examinations of adult and paediatric patients aimed at identification of cardiological abnormalities, myocardial ischaemia or infarction. The device is intended for use in healthcare facilities by duly trained personnel. ECG examination may be recorded in manual or automatic mode with the ability to perform the analysis and interpretation. Electrocardiograph is based on advanced microprocessor technology. It is equipped with a thermal printer with high-resolution head and graphical LCD display. A hightech membrane keyboard makes the AsCARD Green device operation intuitive, and its menu navigation exceptionally easy. This light-weight, small-footprint and battery powered cause that device can be easily transported to any location. With plastic casing and foil covered keyboard, the device is neat and easy to clean. Technical Specifications:
  • dimensions: 220x153x55 mm (L x W x H)
  • weight: < 0,6 kg
  • recording of standard 12 ECG lead
  • saving the ECG signal simultaneously from all the 12 leads during the automatic recording, together with the date and time of the examination, filter settings, examination recording time and, optionally, patient's data, in the internal memory
  • printout of the automatic ECG recording from internal memory, in groups of three leads
  • printout of the analysis, interpretation of automatic ECG examination
  • display of 1, 3, 6 or 12 lead ECG recordings
  • printout of 1 or 3 lead ECG of selected group:
  • attaching the name of the patient to the ECG printout
  • ECG printout in 1- or 3-channel modes
  • membrane alphanumeric keyboard with functional keys
  • graphical menu displayed on the screen for easy operation using keyboard
  • automatic analysis and interpretation in compliance with EN 60601-2-25 (CSE database) - interpretation dependable on age & sex of a patient
  • memory of the last automatic examinations, with a limit from 5 to 1000
  • up to 130 automatic examinations in battery mode
  • continuous heart rate (HR) measurement and display
  • automatic detection of QRS complex
  • adapted to direct operation on an open heart
  • power line interference filter: 50 Hz, 60 Hz
  • muscle interference filter; filters available: 25 Hz, 35 Hz, 45 Hz
  • contour line filters; filters available: 0.15 Hz, 0.45 Hz, 0.75 Hz, 1.5 Hz
  • detection of electrode detachment, independent for each channel
  • selectable channel to detect heart rate
  • the thickness of the printing ECG waveforms line to choose from: normal or bold
  • presentation of the curves in the standard layout or Cabrera layout
  • multilingual menu
  • external USB communication port to connect a PC and the CardioTEKA software, for real-time transmission of ECG signal
  • acoustic signalling of detected beats
  • protection against defibrillation pulse
  • detection and presentation of stimulating pulses on printout
  • automatic examination with the printout of patient data and clinic data
  • battery power saving functions
Standard Equipment:
  • limb electrodes, 4 pieces
  • chest electrodes, 6 piece
  • KEKG-30R ECG cable
  • medical power connector, M12-15
  • RB1 paper 58 mm wide (1 roll)
  • ECG gel
  • operation manual
 
Click Here To Download Catalogue 
Electrocardiograph AsCARD Grey v.07.225 - is a 1, 3, 6, 12 channel ECG unit which enables to make electrocardiogram in full 12 leads. It is intended to conduct ECG examinations of adults and paediatric patients in all types of health care centres. ECG examination may be recorded in manual or automatic mode, with the possibility of analysis and interpretation. The device can be powered from 100 V ÷ 240 V mains supply or by an internal battery. Technical Specification:1. Visualisation of 1, 3, 6 or 12 ECG waveforms, analysis results and interpretations, examinations stored in memory. 2. Recording of 12 standard leads. 3. Print out in 1, 3, 6 or 12 ECG waveforms mode. Printing of a selected group:
  • 1 channel - (I, II, III, aVR, aVL, aVF, V1, V2, V3, V4, V5, V6),
  • 3 channels in standard format - (I-II-III, aVR-aVL-aVF, V1-V2-V3, V4-V5-V6),
  • 3 channels in Cabrera format - (aVL-I-aVR, II-aVF-III, V1-V2-V3, V4-V5-V6),
  • 6 channels in standard format - (I-II-III-aVR-aVL-aVF, V1-V2-V3-V4-V5-V6),
  • 6 channels in Cabrera format - (aVL-I-aVR-II-aVF-III, V1-V2-V3-V4-V5-V6),
  • 12 channels in standard format - (I-II-III-aVR-aVL-aVF-V1-V2-V3-V4-V5-V6),
  • 12 channels in Cabrera format - (aVL-I-aVR-II-aVF-III-V1-V2-V3-V4-V5-V6).
4. Available types of examinations: manual, AUTO, SPIRO, automatic to clipboard, AUTOMANUAL, LONG (v.07.xx5). 5. Automatic record ECG signal from all 12 leads simultaneously, with save to temporary memory function, then depending on the settings: print out examination's result, analysis, interpretation or save to database. 6. Adjustable length of automatic examination recording — interval of 6–30 seconds. 7. Reverse recording in automatic examination to clipboard and in manual examination (v.07.xx5). 8. Rhythm print out in AUTO examination and automatic examination to clipboard. 9. Definable stages of examination according to set up parameters in AUTOMANUAL examination. 10. Storing an examination in memory, 1–15 minutes in LONG mode (v.07.xx5). 11. ECG printed directly from the electrocardiograph using PCL5/6 printer. 12. Printout from database. Possibility to printout additional information about examination or patient. 13. Alpha-numerical soft-key keyboard with functional buttons. 14. Possibility to set parameters: speed, sensitive, intensity of printing. 15. Menu displayed on the screen for easy operation using touch panel. 16. Database of patients and examinations. Internal memory up to 1000 patients, 1000 examinations. 17. Viewing of the memory-stored examinations on display, with the possibility of changing the number of leads, augmentation and speed. 18. Automatic analysis and interpretation in compliance with EN 60601-2-51 (CSE database) - Analysis and interpretation dependable on age & sex of a patient. 19. Up to 130 automatic examinations in battery mode. 20. Continuous heart rate (HR) measurement and display. 21. Adapted to direct operation on an open heart. 22. Device allows to enable and disable the following filters:
  • power line interference filter; filters available: 50 Hz, 60 Hz,
  • muscle interference filter; filters available: 25 Hz, 35 Hz, 45 Hz,
  • contour line filters; filters available: 0.15 Hz, 0.45 Hz, 0.75 Hz, 1.5 Hz,
  • the low-pass filter (v.07.224, v.07.324, v.07.225, v.07.325): 75 Hz, 100 Hz, 125 Hz, 150 Hz,
  • the auto-adaptive filter (v.07.224, v.07.324, v.07.225, v.07.325).
23. Detection of electrode detachment, independent for each channel (INOP control). 24. Detection of cardiac stimulator. 25. Sound signalling of detected stimulations of heart stimulator. 26. Protection against defibrillation pulse. 27. ECG recordings optionally saved on PenDrive, send on email or to other AsCARD via EKG-MAIL. 28. Wireless communication with the LAN or the Internet (v.07.3xx). 29. Wired communication with the LAN or the Internet. 30. Cooperation with CardioTEKA and CardioTEL. 31. Possibility of accepting orders for examination and sending back the results in HL7 standard via Internet (v.07.3xx). 32. Possibility of conducting preliminary spirometry examinations by using SPIRO-31 attachment. 33. EMR – keep performed examinations in specified period of time on external data storage (USB memory). Accessories 1. Limb electrodes, 4 pieces (EKK type). 2. Chest electrodes, 6 pieces (EPP type). 3. KEKG 30R ECG cable. 4. Main cable. 5. R-A4 paper, 112 mm wide (1 reel). 6. ECG gel. 7. Operation manual.  
Click Here To Download Catalogue
DETAILS Upgraded Images with More Clarity SonoScape never stops making progress in improving the image quality of its ultrasound products to enhance the confidence of diagnosis for doctors. With extraordinary images provided by P20, the anatomy structures are clearer than ever. C-Xlasto Imaging With C-xlasto Imaging, P20 enables comprehensive quantitative elastic analysis. Meanwhile, C-xlasto on P20 is supported by linear, convex and transvaginal probes, to ensure good reproducibility and highly consistent quantitative elastic results. S-Live S-Live allows for detailed visualization of subtle anatomical features, thereby enabling intuitive diagnosis with real-time 3D images and enriching patient communication. Pelvic Floor 4D Transperineal 4D pelvic floor ultrasound can provide useful clinical values in assessing the vaginal delivery impact on the female anterior compartment, judging whether the pelvic organs are prolapsed or not and the extent, determining if the pelvic muscles were torn accurately. Anatomic M Mode Anatomic M Mode helps you observe the myocardial motion at different phases by freely placing sample lines. It accurately measures the myocardial thickness and the heart size of even difficult patients and supports the myocardial function and LV wall-motion assessment. Tissue Doppler Imaging P20 is endowed with Tissue Doppler Imaging which provides velocities and other clinical information on myocardial functions, facilitating clinical doctors with the ability to analyze and compare the motions of different parts of the patient's heart.  
Click Here To Download Catalogue
DETAILS B + Compound B + Compound utilizes several lines of sight for optimal contrast resolution, speckle reduction and border detection, with which P10 is ideal for superficial and abdominal imaging with better clarity and improved continuity of structures. μ-Scan The new generation μ-Scan imaging technology gives you better image quality by reducing noise, improving signal strength and improving visualization. P10 offers a comprehensive selection of electronic probes to maximize its capabilities to meet a wide range of applications including abdomen, pediatric, OB/GYN, cardiovascular, musculoskeletal, etc. The advanced probe technologies also effectively enhance the image quality and confidence in reaching clinical diagnoses, even in difficult patients. Convex Probe 3C-A Ideal for an abundant of application such as abdomen, gynecology, obstetrics, urology and even abdomen biopsy. Linear Probe L741 This linear probe is designed to satisfy vascular, breast, thyroid, and other small parts diagnosis, and its adjustable parameters could also present users a clear view of MSK and deep vessels. Phase Array Probe 3P-A For the purpose of adult and pediatric cardiology and emergency, the phase array probe provides elaborate presets for different exam modes, even for difficult patients. Intracavitary Probe 6V1 Intracavitary probe could face application of gynecology, urology, prostate, and its temperature detection technology not only protects the patient but also extends the service life.  
Click Here To Download Catalogue
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • Rating
  • Price
  • Description
Click outside to hide the comparison bar
Compare