Auto BIPAP VM-7 Machine

$0.00

Shipped From Abroad

The VentMed BiPAP VM7 is an automatic bi-level device that delivers effective therapy for a wide range of users noncompliant with traditional CPAP devices. It delivers two different values of air pressure, one for inhaling, another for exhaling, to hold a user’s upper airway open and help him/her breathe more effectively. The VentMed VM7 is a premium BiPAP for patients who have been diagnosed with severe sleep apnea.

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
SF1033560130180-11
Brands:: VentMed

Description

Key Features of Auto BIPAP VM-7:

Auto ON / OFF

Designed to make the device start automatically in a while after you wear mask, and stop the device work automatically in 10 seconds after you take mask away. The Auto ON/OFF function can be turned off on the menu.

 

Smart Ramp Settings

It lets the sleep apnea therapy start from a low and pleasant pressure level when the user is still awake. Then the air pressure is gradually ramped up to the correct level and the user can easily fall asleep without even noticing the increment.

Sleep Tracking

It comes with a TF card that will allow you to keep detailed data about your sleep disorder. The new TF card will allow you to store your sleep apnea information, which will enable you to get therapy support from your doctor, and compile compliance reports.

 

Alarm Setting

Designed to alarm when there is leakage. Can set as ON or OFF.

Whisper-Quiet

It is less than 26 decibels (dB), making it quieter than a whisper and comparable to leaves rustling.

Expiratory Pressure Relief

The VM7 BIAP automatically sets EPR (Expiratory Pressure Relief) function so you may find it easier to breathe out. This can help you get used to therapy.

You can set the expiratory pressure relief Level to off (0) or between 1 and 3, where 1 is the lowest expiratory pressure relief and 3 is the highest setting.

 

Heated Humidifier

The humidifier moistens the air and is designed to make therapy more comfortable. You can set the Humidity Level to off (0) or between 1 and 5, where 1 is the lowest humidity setting and 5 is the highest humidity setting.

The push-pull water tank design is very easy to disassemble and install, which is convenient for adding water and cleaning.

ST Mode & Backup Rate (BUR)

A BPM value (Breaths per Minute) can be set as a backup rate in ST Mode. If the user’s spontaneous respiratory rate falls below that value, the device will add pressure to prompt him/her to breathe.

With the machine intervening in the breathing, it can help the user inhale and exhale more easily during challenging conditions, lowering respiratory muscle workload. It can also get the user more oxygen and reduce CO2 in the user’s bloodstream.

Specifications
Product Name
BIPAP VM-7
Material
ABS+plastic
Color
Black
Work mode
CPAP,Auto,Auto S, S,T,ST
Sound
<28db
Data storage
TF card
Screen
2.8 inch color
Pressure Range
4-25cmH2O
Power supply
Input100-240V.50-60Hz,1-2A; Output+24V,2.5V
Over-temperature protection
Stop working automatically,
buzzle ring 4 times
Ramp item 
0-60min adjustable  1 min/step
Auto ON/OFF
Yes
EPR
Yes,0-3 level
Auto-Altitude
Yes
Leak compensation
Yes
Awake detection
Yes
Breath Event detection
Yes
Auto pressure titration
Yes
Water Capacity
200ML max
Humidifier
Heated Humidifier,0-5 level
Mask /power Off Alarm
Yes
Dimensions
29L*15W*10H(machine);
38.5L*36.5W*16H(carton)
Weight(With humidifier)
1.8KG(Net weight);4KG(Gross weight)
work for
OSA /CSA /MSA/ Hypopnea/ COPD

Reviews

There are no reviews yet.

Be the first to review “Auto BIPAP VM-7 Machine”

Your email address will not be published. Required fields are marked *

Quick Comparison

Auto BIPAP VM-7 Machine removeASPEL AsCARD Green ECG Machine removeASPEL Stress ECG with Ergometer and Software removeTimesco Jumper Fingertip Pulse Oximeter removeBistos BT- 720 Patient Monitor removeBistos BT-770-12.1" Touchscreen Patient Monitor remove
NameAuto BIPAP VM-7 Machine removeASPEL AsCARD Green ECG Machine removeASPEL Stress ECG with Ergometer and Software removeTimesco Jumper Fingertip Pulse Oximeter removeBistos BT- 720 Patient Monitor removeBistos BT-770-12.1" Touchscreen Patient Monitor remove
ImageASPEL AsCARD Green ECG MachineASPEL Stress ECG and ErgometerFingertip Pulse OximeterBistos BT-720 Patient MonitorBistos BT-770-12.1" Touchscreen Patient Monitor
SKUSF1033560130180-11SF1033560075-9SF1033560075-1SF1033560084-2SF1033560059-8SF1033560059-1
Rating
Price

$0.00

$0.00

$4,202.00

$17.00

$330.00

$902.00

Stock
Availability
Add to cart

DescriptionShipped From Abroad The VentMed BiPAP VM7 is an automatic bi-level device that delivers effective therapy for a wide range of users noncompliant with traditional CPAP devices. It delivers two different values of air pressure, one for inhaling, another for exhaling, to hold a user’s upper airway open and help him/her breathe more effectively. The VentMed VM7 is a premium BiPAP for patients who have been diagnosed with severe sleep apnea.
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped from Abroad AsCARD Green v.06.101 is a 1-, 3-, 6- and 12-channel ECG unit which enables to make electrocardiogram in full 12 leads. Intended for ECG examinations of adult and paediatric patients aimed at identification of cardiological abnormalities, myocardial ischaemia or infarction. The device is intended for use in healthcare facilities by duly trained personnel. ECG examination may be recorded in manual or automatic mode with the ability to perform the analysis and interpretation. Delivery & Availability: Typically 10 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.Shipped from Abroad Ergometer CRG 200 is dedicated for Exercise Stress Tests System CardioTEST. The Ergometer has been designed according to modern technologies. It is controlled from PC equipped in CardioTEST software. Load level is controlled by a microprocessor, therefore it does not depend on speed, which in turn can be adjusted according to patient’s individual needs. Ergometer is equipped with ECG mode recording 12 standard leads. Delivery & Availability: Typically 21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.In Stock Integrated with SPO2 probe and processing display module. Small in volume、light in weight and convenient in carrying. Operation of the product is simple ,low power consumption. SPO2 , PR and Ridisplay,. Pulse rate value display, bar graph display. Low-voltage indication: low-voltage indicator appears before working abnormally which is due to low-voltage. Automatically power off function: when the device is under the state of measuring interface . it will automatically power off within 5 seconds if the finger falls out of probe. Delivery & Availability: Typically 2 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.Shipped from abroad Bistos BT - 720 Patient Monitor: Bistos Portable Patient Vital Signs Monitor, SpO2, Pulse, *NIBP, BT-720. The Bistos BT-720 is a compact size vital signs monitor with the standard parameters of SpO2 and Pulse. You can also add the NIBP and/or Masimo SpO2 at an additional cost. The BT-720 has a 4.3" color touch screen The PC software allows the vital signs information to be transferred and analyzed on a computer. Delivery & Availability: Typically 7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.Shipped from Abroad The Bistos BT-770 patient monitor is equipped with a 12.1" touchscreen display, which allows for an easy operation and readability with a powerful rechargeable battery guaranteeing a continuous operation of 5 hours to monitor ECG, SpO2, NIBP, temperature and respiration Delivery & Availability: Typically 14 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Content
Key Features of Auto BIPAP VM-7:
Auto ON / OFF Designed to make the device start automatically in a while after you wear mask, and stop the device work automatically in 10 seconds after you take mask away. The Auto ON/OFF function can be turned off on the menu.
  Smart Ramp Settings It lets the sleep apnea therapy start from a low and pleasant pressure level when the user is still awake. Then the air pressure is gradually ramped up to the correct level and the user can easily fall asleep without even noticing the increment.
Sleep Tracking It comes with a TF card that will allow you to keep detailed data about your sleep disorder. The new TF card will allow you to store your sleep apnea information, which will enable you to get therapy support from your doctor, and compile compliance reports.  
Alarm Setting Designed to alarm when there is leakage. Can set as ON or OFF. Whisper-Quiet It is less than 26 decibels (dB), making it quieter than a whisper and comparable to leaves rustling. Expiratory Pressure Relief The VM7 BIAP automatically sets EPR (Expiratory Pressure Relief) function so you may find it easier to breathe out. This can help you get used to therapy. You can set the expiratory pressure relief Level to off (0) or between 1 and 3, where 1 is the lowest expiratory pressure relief and 3 is the highest setting.  
Heated Humidifier The humidifier moistens the air and is designed to make therapy more comfortable. You can set the Humidity Level to off (0) or between 1 and 5, where 1 is the lowest humidity setting and 5 is the highest humidity setting. The push-pull water tank design is very easy to disassemble and install, which is convenient for adding water and cleaning.
ST Mode & Backup Rate (BUR)
A BPM value (Breaths per Minute) can be set as a backup rate in ST Mode. If the user’s spontaneous respiratory rate falls below that value, the device will add pressure to prompt him/her to breathe. With the machine intervening in the breathing, it can help the user inhale and exhale more easily during challenging conditions, lowering respiratory muscle workload. It can also get the user more oxygen and reduce CO2 in the user’s bloodstream.
Specifications
Product Name
BIPAP VM-7
Material
ABS+plastic
Color
Black
Work mode
CPAP,Auto,Auto S, S,T,ST
Sound
<28db
Data storage
TF card
Screen
2.8 inch color
Pressure Range
4-25cmH2O
Power supply
Input100-240V.50-60Hz,1-2A; Output+24V,2.5V
Over-temperature protection
Stop working automatically,
buzzle ring 4 times
Ramp item 
0-60min adjustable  1 min/step
Auto ON/OFF
Yes
EPR
Yes,0-3 level
Auto-Altitude
Yes
Leak compensation
Yes
Awake detection
Yes
Breath Event detection
Yes
Auto pressure titration
Yes
Water Capacity
200ML max
Humidifier
Heated Humidifier,0-5 level
Mask /power Off Alarm
Yes
Dimensions
29L*15W*10H(machine);
38.5L*36.5W*16H(carton)
Weight(With humidifier)
1.8KG(Net weight);4KG(Gross weight)
work for
OSA /CSA /MSA/ Hypopnea/ COPD
AsCARD Green v.06.101 is a 1-, 3-, 6- and 12-channel ECG unit which enables to make electrocardiogram in full 12 leads. Intended for ECG examinations of adult and paediatric patients aimed at identification of cardiological abnormalities, myocardial ischaemia or infarction. The device is intended for use in healthcare facilities by duly trained personnel. ECG examination may be recorded in manual or automatic mode with the ability to perform the analysis and interpretation. Electrocardiograph is based on advanced microprocessor technology .It is equipped with a thermal printer with high-resolution head and 4,3" LCD display. A touch panel and high-tech membrane keyboard makes this device intuitive in usage and its menu navigation exceptionally easy. This light-weight, small-footprint and battery powered cause that device can be easily transported to any location. With plastic casing and foil covered keyboard, the device is neat and easy to clean. Technical Specifications:
  • dimensions: 220x153x55 mm (LxWxH)
  • weight: < 0,6 kg
  • recording of standard 12 ECG leads
  • saving the ECG signal simultaneously from all the 12 leads during the automatic recording, together with the date and time of the examination, filter settings, examination recording time and, optionally, patient's data, in the internal memory
  • printout of the automatic ECG recording from internal memory, in groups of three leads
  • printout of the analysis, interpretation of automatic ECG examination
  • display of 1, 3, 6 or 12 lead ECG recordings
  • ECG printout in 1-, 3-, 6- or 12-channel modes
  • attaching the name of the patient to the ECG printout
  • LCD TFT (4,3", 480x282) touch screen
  • membrane alphanumeric keyboard with functional keys
  • graphical menu displayed on the screen for easy operation using keyboard
  • automatic analysis and interpretation in compliance with EN 60601-2-25 (CSE database) - interpretation dependable on age & sex of a patient
  • memory of the last automatic examinations, with a limit from 5 to 1000
  • up to 130 automatic examinations in battery mode
  • continuous heart rate (HR) measurement and display
  • automatic detection of QRS complex
  • adapted to direct operation on an open heart
  • power line interference filter: 50 Hz, 60 Hz
  • muscle interference filter; filters available: 25 Hz, 35 Hz, 45 Hz
  • contour line filters; filters available: 0.15 Hz, 0.45 Hz, 0.75 Hz, 1.5 Hz
  • detection of electrode detachment, independent for each channel
  • selectable channel to detect heart rate
  • thickness of the printing ECG waveforms line to choose from: normal or bold
  • presentation of the curves in the standard layout or Cabrera layout
  • multilingual menu
  • external USB communication port to connect a PC and the CardioTEKA software, for real-time transmission of ECG signal
  • acoustic signalling of detected beats
  • protection against defibrillation pulse
  • detection and presentation of stimulating pulses on printout
  • automatic examination with the printout of patient data and clinic data
  • battery power saving functions
Standard Equipment:
  • clamp electrodes (set of 4)
  • chest electrodes (set of 6)
  • KEKG-30R ECG cable
  • medical power connector M12-15
  • ECG paper RB1 58 mm wide (1 roll)
  • ECG gel
  • operation manual
 
Click Here To Catalogue Download 
Ergometer CRG 200 is dedicated for Exercise Stress Tests System CardioTEST. The Ergometer has been designed according to modern technologies. It is controlled from PC equipped in CardioTEST software. Load level is controlled by a microprocessor, therefore it does not depend on speed, which in turn can be adjusted according to patient’s individual needs. Ergometer is equipped with ECG mode recording 12 standard leads. Technical Specifications:
  • Cooperation with the CardioTEST cardiovascular exercise system and AsTER cardiac rehabilitation system,
  • Control using a computer through the RS-232 port,
  • Braking: a processor-controlled brake with torque measurement,
  • Load range: 25 - 1000 W,
  • Speed ​​range: 20 - 150 rpm,
  • Load independent of the number of turns,
  • Built-in ECG module,
  • 12 standard leads in diagnostic mode,
  • 2 leads in training mode,
  • Sensitivity 2,5 / 5/10/20 mm / mV,
  • Shift 25/50/100 mm / s,
  • Digital filters 25 Hz, 35 Hz, 50 Hz, anti-frit filter,
  • Digital filter of the isoelectric line,
  • Measuring range HR 15-240 bpm,
  • Maximum patient weight 200 kg,
  • Power supply: 230 V, 50 Hz, 60VA,
  • Dimensions: (LxWxH) 1190x600x1370 mm.
CardioTEST Software:
  • excellent quality of ECG waveforms thanks to the use of digital filters eliminating the swimming of the isoelectric line and disruption of muscle origin,
  • uninterrupted recording and presentation of 12-lead ECG signal,
  • presentation of averaged P-QRS-T units with 12 leads along with the results of ST level and slope measurements,
  • automatic HR measurement, ST level and ST segment slope,
  • automatic control of cycloergometer and treadmill load,
  • archiving and printing of the research report,
  • automatic determination of measuring points with the possibility of manual correction,
  • automatic arrhythmia analysis,
  • presentation of parameters regarding: test phase, current load, stage time and total effort time,
  • monitored parameters: rhythm rate, MET, double product, blood pressure, level, ST segment slope and load,
  • real-time ECG printout,
  • preview of trends of all measured parameters during the test,
  • alarm system for monitored parameters and arrhythmia,
  • an option to automatically measure blood pressure,
  • archiving and printing a report enabling a reliable assessment of the study (such an report contains ECG, average P-QRS-T assemblies and a table with measurement results),
  • standard test protocols and the ability to define your own protocols also in RAMP mode,
  • preview the report on the screen before printing the report,
  • function of reanalysis of the performed test,
  • presentation of 3D trends illustrating ST segment changes.
 
Click Here To Download Catalogue 
Integrated with SPO2 probe and processing display module • Small in volume, light in weight, convenient in carrying • Simple operation, lower power consumption • OLED screen display • SPO2, PR, bar graph of pulse, plethysmogram, blood perfusion index, battery indication display • 4 directions display, 6 display models, large fonts display • Brightness control, Demo mode, Setup menu • Movement interference • Alarm function and adjustable alarm parameters • Can be connected to mobile phones through Bluetooth; can support Android and iOS client • Auto power-off when no signal after 10s • Powered by 2*AAA alkaline batteries Specification: • Size: 62 x 37 x 32mm • Peak wavelength range of the light emitted from the probe: red light 660nm±3; infrared light 905nm±5 • Maximum optical output power of the probe: 1.2mW for infrared light (905nm) • Bluetooth module: 4.0 (single-mode) • Working temperature: 5℃ to 40℃ (41°F to 104°F) • Relative humidity: 15% to 80%, non-condensing • Atmospheric pressure: 70kPa to 106kPa • Rated voltage: DC 3V Package included: • 1 x JUMPER JPD-500F Bluetooth Fingertip Pulse Oximeter • 2 x AAA Batteries • 1 x Carry Case • 1 x Lanyard • 1 x English User ManualBistos BT - 720 Patient Monitor: Bistos Portable Patient Vital Signs Monitor, SpO2, Pulse, *NIBP, BT-720. The Bistos BT-720 is a compact size vital signs monitor with the standard parameters of SpO2 and Pulse. You can also add the NIBP and/or Masimo SpO2 at an additional cost. The BT-720 has a 4.3" color touch screen The PC software allows the vital signs information to be transferred and analyzed on a computer. Features:
  • 3" color touch screen
  • Standard Confirgurations: SpO2 and Pulse
  • Optioal NIBP and Masimo SpO2
  • Short/long trend graphic/trend table display
  • Audio and visual alarm, adjustable alarm limit
  • Automatic brightness adjustment
  • Accurate SpO2 reading during motion or low perfusion
  • Perfusion index data / bar graphic display
  • Pitch tone variation for pulse rate
  • Internal memory for data storage
  • SD card for easy software upgrade
  • Over 8 hours of operation with the re-chargeable li-ion battery
  • PC software for data review and analysis on a computer
  Technical Specifications:
Model BT-720
Display 4.3" Color LCD Touch Screen
SpO2 Measurement Range 0-100%
Accuracy (70-100%) Adult/Pediatric +/- 2%
Neonate +/- 3%
Accuracy (0-69%) Unspecified
Perfusion Index 0.05-20%
Pulse Rate Range (bpm) 25-250
NIBP* (Optional) Method Automatic Oscillometric
Operation Mode Manual/Automatic/STAT
Parameter Systolic/Diastolic/Mean
Systolic Range (mmHg) Adult 40-270
Pediatric 40-200
Neonate 40-130
Diastolic Range Adult 100-210
Pediatric 100-160
Neonate 10-90
Mean Range Adult 20-230
Pediatric 20-175
Neonate 20-100
SpO2 Masimo* (Optional) Masimo SpO2
Battery Type (Capacity) Li-ion (4400mAh)
Run time 8 Hours
Charging Time 8 Hours
Interface RJ45, SD Card Slot
Warranty 2 Years
 
Click Here To Download Catalogue
 
Bistos BT-770 is a 12.1" touchscreen patient monitor designed for easy operations. SPECIFICATIONS
  • 12.1“ color TFT touch screen
  • ECG, Resp., SpO2, NIBP, Temp., CO2, IBP, Multi-gas, C.O., Masimo SpO2
  • Precise ECG measurement with pacemaker detection ST segment and 16 types of arrhythmia analysis Double overpressure protection for NIBP Intelligent cuff inflation pressure adjustment
  • Smart Hook/Stand design, provide multiple placement modes Plug & Play Modular IBP& C.O., Modular Printer Multiple configuration options: 4-channel IBP, CO2, invasive C.O., Multi-gas Over 5 hours continuous working on battery 12-15V wide range DC input, suitable for ambulance Capable to connect with central monitoring system HL7 export to clinical information systems (option)
 
Click Here To Download Catalogue
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • Rating
  • Price
  • Description
Click outside to hide the comparison bar
Compare