Capnograph and Oximeter KMI605A
$759.00
Shipped From Abroad
A tabletop carbon dioxide monitor that can be fixed or mobile. High accuracy and stable performance. It can be used in emergency, operating room, intensive care unit (ICU), intubation position monitoring, etc.
Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Description
Features of Kingst Desktop Capnograph and Oximeter Monitor KMI605A
- It Can Be Tested Immediately After Startup Without Zero Calibration
Atmospheric pressure automatic compensation, whether plateau or helicopter rescue, can provide accurate monitoring.
- Simple Maintenance
Sturdy structure, suitable for various harsh environments
- The Lithium Battery Can Work Continuously For More Than 12 Hours At Full Load
Nice price consumables, the dehydrator can work continuously for a long time.
Specifications of Kingst Desktop Capnography Monitor KMI605A
| AC Input | 220V,50Hz,12V/1.8AH |
| Environmental temperature | 5~40℃ |
| Relative humidity | 30~75%（Non-condensing） |
| Atmospheric pressure | 86~106kpa |
| Co2 Measuring Range | 0~150mmHg |
| Accuracy | 0~40mmHg, inaccuracy≤± 2mmHg； 41~70mmHg, inaccuracy≤±5% of Reading； 70~100mmHg, inaccuracy≤± 8% of Reading； 101~150mmHg, inaccuracy≤±10% of Reading |
| Respiration Rate | 3~150t/min |
| Monitoring Inaccuracy | the bigger value of ±1% or ±1 t/min |
| Gas sampling flow | 50~250cc/min （Optional） |
| SpO2 monitoring range | 50~100% (KMI605B without SpO2) |
| Accuracy | For 70%～100%, inaccuracy≤± 2%, When ≤70%, not required |
| Monitoring range of Pulse rate | 30~250bpm (KMI605B without PR) |
Application Scenarios OF Kingst Desktop Capnography Monitor KMI605A
- Responsive and easy to operate
KMI605A/B is a tabletop accurate capnograph, it can measure EtCO2 waveform and value immediately after power on, and no need for zero calibration. At the same time, it has the atmospheric pressure compensation, so that KMI605A/B can well adapt to harsh environments such as plateaus or helicopter rescue.
- Sturdy and easy to maintain
The housing is sturdy and durable and can be used in a variety of harsh environments. Its maintenance and upgrades are very simple.
- Long continuous working time
- Two modes are available
Mainstream and Side Stream. Different modes can be selected according to different scenarios.
Quick Comparison
| Settings | Capnograph and Oximeter KMI605A remove | Siare Morpheus E Anaesthetic Machine remove | Agary I.V. Cannula remove | Render SD-M2000A Anesthetic Machine remove | Timesco Jumper Fingertip Pulse Oximeter remove | Drip Stand remove | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | Capnograph and Oximeter KMI605A remove | Siare Morpheus E Anaesthetic Machine remove | Agary I.V. Cannula remove | Render SD-M2000A Anesthetic Machine remove | Timesco Jumper Fingertip Pulse Oximeter remove | Drip Stand remove | ||||||||||||||||||||||||
| Image | |  |  |  |  |  | ||||||||||||||||||||||||
| SKU | SF1033560130170-5 | SF1033560101-1 | SF1033560084-221 | SF1033560011-13 | SF1033560084-2 | SF1033560084-67 | ||||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||||
| Price | $759.00 |
| $7.10 | $1,870.00 | $17.00 | $27.00 | ||||||||||||||||||||||||
| Stock | ||||||||||||||||||||||||||||||
| Availability | ||||||||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||||
| Description | Shipped From Abroad
A tabletop carbon dioxide monitor that can be fixed or mobile. High accuracy and stable performance. It can be used in emergency, operating room, intensive care unit (ICU), intubation position monitoring, etc.
Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
| Shipped from Abroad The MORPHEUS E is an anaesthesia machine with electronic flowmeters and it can be used on adult, children and newborn patients. The MORPHEUS M is suitable for administration of Oxygen – Air – Nitrous Oxide – Halothane – Enflurane – Isoflurane – Sevoflurane – Desflurane mixtures. Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information. | In stock
I.V Cannula with wings & injection port 24G/19mm, 0.70mm/20ml/min Injection port with unidirectional valve for facilitating extra medication and preventing back flow. Specially engineered recessed plug with protective ring to avoid risk of contamination. Angle & grooved wings for easy cannulation and to prevent rolling of cannula over patient body. Colour coded cap for easy identification of guage size.
| Shipped from Abroad
| In Stock Integrated with SPO2 probe and processing display module. Small in volume、light in weight and convenient in carrying. Operation of the product is simple ,low power consumption. SPO2 , PR and Ridisplay,. Pulse rate value display, bar graph display. Low-voltage indication: low-voltage indicator appears before working abnormally which is due to low-voltage. Automatically power off function: when the device is under the state of measuring interface . it will automatically power off within 5 seconds if the finger falls out of probe. Delivery & Availability: Typically 2 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information. | In stock Drip Stand is a very simple, easy to adjust and maneuver product. Suitable for most healthcare environments, this drip stand is light in weight made of high-quality stainless steel. Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information. | ||||||||||||||||||||||||
| Content | Features of Kingst Desktop Capnograph and Oximeter Monitor KMI605A
Atmospheric pressure automatic compensation, whether plateau or helicopter rescue, can provide accurate monitoring.
Sturdy structure, suitable for various harsh environments
Nice price consumables, the dehydrator can work continuously for a long time.
Specifications of Kingst Desktop Capnography Monitor KMI605A
Application Scenarios OF Kingst Desktop Capnography Monitor KMI605A
| The MORPHEUS E is an anaesthesia machine with Electronic Flowmeters and it can be used on adult, children and newborn patients. The MORPHEUS E is suitable for administration of Oxygen – Air – Nitrous Oxide – Halothane – Enflurane – Isoflurane – Sevoflurane – Desflurane mixtures.
Features:
Click Here To Download Catalogue | I.V Cannula with wings & injection port 24G/19mm, 0.70mm/20ml/min Injection port with unidirectional valve for facilitating extra medication and preventing back flow. Specially engineered recessed plug with protective ring to avoid risk of contamination. Angle & grooved wings for easy cannulation and to prevent rolling of cannula over patient body. Colour coded cap for easy identification of guage size. |
Click Here To Download Catalogue | Integrated with SPO2 probe and processing display module • Small in volume, light in weight, convenient in carrying • Simple operation, lower power consumption • OLED screen display • SPO2, PR, bar graph of pulse, plethysmogram, blood perfusion index, battery indication display • 4 directions display, 6 display models, large fonts display • Brightness control, Demo mode, Setup menu • Movement interference • Alarm function and adjustable alarm parameters • Can be connected to mobile phones through Bluetooth; can support Android and iOS client • Auto power-off when no signal after 10s • Powered by 2*AAA alkaline batteries Specification: • Size: 62 x 37 x 32mm • Peak wavelength range of the light emitted from the probe: red light 660nm±3; infrared light 905nm±5 • Maximum optical output power of the probe: 1.2mW for infrared light (905nm) • Bluetooth module: 4.0 (single-mode) • Working temperature: 5℃ to 40℃ (41°F to 104°F) • Relative humidity: 15% to 80%, non-condensing • Atmospheric pressure: 70kPa to 106kPa • Rated voltage: DC 3V Package included: • 1 x JUMPER JPD-500F Bluetooth Fingertip Pulse Oximeter • 2 x AAA Batteries • 1 x Carry Case • 1 x Lanyard • 1 x English User Manual |
Drip Stand is a very simple, easy to adjust and maneuver product. Suitable for most healthcare environments, this drip stand is light in weight made of high-quality stainless steel.
Use : Bedridden patients, Senior citizen care, Patients in coma
Advantages :
| ||||||||||||||||||||||||
| Weight | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||
| Additional information |
Reviews
There are no reviews yet.