COSAMS_01-1-787x787
/

CARBON MONOXIDE ATMOSPHERE MONITORING SYSTEM

Brands: Analox

$0.00

Shipped From Abroad

The COSAMS unit was designed specifically for use on submarines, most directly those that operate on diesel engines. Built to exacting military standards for performance, reliability and endurance, the Analox COSAMS uses proprietary Gas Filter Correlation (GFC) technology to specifically analyze the unique properties of CO.

The COSAMS (Carbon Monoxide Submarine Atmosphere Monitoring System) has been designed for use on submerged submarines to support life, where crew can be living and working for up to 90 days. Carbon monoxide can be generated on a submarine in several ways, from cooking and fire, to the incomplete combustion of diesel fuel and chlorate candles.

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
SF1033560130141-2
Brands:: Analox

Description

Key Features
  • Uses a GFC infra-red sensing technique ensuring the system is not sensitive to hydrogen or water vapor
  • Built-in auto-zero function ensures sensor stability
  • Real-time monitoring ensures rapid response to carbon monoxide (CO) issues as they occur
  • 90 days data-logging allows records to be stored and used should they ever be needed
  • Easy to maintain allowing you to be more self-sufficient whilst minimizing downtime
  • Designed specifically for the submarine environment so it is able to cope with the demands of the environment in terms of EMC, shock and temperature

 

Technical Specifications
Mechanical
Nominal cabinet dimensions (exc mounting lugs) 479 x 280 x 176 mm (h x w x d)
Nominal cabinet dimensions (inc mounting lugs) 479 x 360 x 200 mm (h x w x d)
Cabinet weight 11.6 kg
Cabinet material aluminium
Electrical
Electrical supply 115 V AC 60 Hz
Max power consumption 90W
Fuse rating (F1, F2): 20 mm, 2.5A anti-surge
Signal output 4-20 mA
EMC compliance MIL-STD-461F
ESD compliance EN 61000-4-2
Operating temperature range 0 to +45°C
Storage temperature 40 to +70°C
Operating pressure range 800 to 1400 hPa
Extended pressure range 600 to 800 hPa (Degraded performance over this pressure range)
Storage/transport pressure range 300 to 1400 hPa
Operating humidity range 0 to 80 %RH
Extended humidity range (up to 1 hour) 80 to 100 %RH
Storage humidity range 0 to 80 %RH (temporary max. 100 %RH)
Max. roll angle 15° (constant), 45° (temporary)
Max. pitch angle 10° (constant), 30° (temporary)
Shock Tested at 22g, 20ms (half sine) without shock isolation
Vibration NATO STANAG 4138
CO measuring range 0 to 200 ppm
Repeatability, measured at RTP ± (1 ppm CO + 1 display count)
Accuracy across normal operating environmental envelope ±5% full scale (equivalent to ± 10 ppm)
Zero drift ±1 ppm CO/day
Cross-sensitivity to hydrogen 2% vol H2 < 1 ppm CO
Cross-sensitivity to CO2 5% vol CO2 < 1 ppm CO
Response time T90 <60s

Click here to download Data Sheet
Click here to download Manual

Reviews

There are no reviews yet.

Be the first to review “CARBON MONOXIDE ATMOSPHERE MONITORING SYSTEM”

Your email address will not be published. Required fields are marked *

Quick Comparison

CARBON MONOXIDE ATMOSPHERE MONITORING SYSTEM removePARTIAL PRESSURE O2 ANALYSER removeAx60+ Kiosk removeSuper-Full Touch Screen Water Purification System removeOXYGEN & CARBON DIOXIDE MONITOR removeAutomatic Pipette remove
NameCARBON MONOXIDE ATMOSPHERE MONITORING SYSTEM removePARTIAL PRESSURE O2 ANALYSER removeAx60+ Kiosk removeSuper-Full Touch Screen Water Purification System removeOXYGEN & CARBON DIOXIDE MONITOR removeAutomatic Pipette remove
Image
SKUSF1033560130141-2SF1033560130141-19SF1033560130141-6SF1033560130126-3SF1033560130141-12SF1033560084-130
Rating
Price

$0.00

$0.00

$0.00

$0.00

$0.00

$0.00

Stock
Availability
Add to cart

Read more

Read more

Read more

Read more

Read more

Read more

DescriptionShipped From Abroad

The COSAMS unit was designed specifically for use on submarines, most directly those that operate on diesel engines. Built to exacting military standards for performance, reliability and endurance, the Analox COSAMS uses proprietary Gas Filter Correlation (GFC) technology to specifically analyze the unique properties of CO.

The COSAMS (Carbon Monoxide Submarine Atmosphere Monitoring System) has been designed for use on submerged submarines to support life, where crew can be living and working for up to 90 days. Carbon monoxide can be generated on a submarine in several ways, from cooking and fire, to the incomplete combustion of diesel fuel and chlorate candles.
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad
Key Features
  • Compact in size making it ideal for confined space use
  • Fitted with a reliable PPO2 sensor, proven and tested within the hyperbaric environment
  • Large LCD display making readings easy to view
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad
Key Features
  • Low maintenance
  • Quick Connect System
  • Pre-wired, ready to go
  • Can support up to 4 alarm units
  • Push button for unit testing
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad The Super series uses city tap water as the water source, and can easily and quickly produce secondary RO (reverse osmosis) water, EDI deionized water and UP ultrapure water. It uses a standard two-stage reverse osmosis system and Ionpure EDI technology and modules to continuously produce Class II pure water with a TOC of more than 10MΩ.cm (25℃) and <30ppb, and ultrapure water of 18.2MΩ.cm (25℃). System water output: 10 liters/hour, and the daily output of pure water can reach 240 liters.
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad
Key Features
  • Operating temperature 0 °C to 40 °C (32 °F to 104 °F)
  • Dual state-of-the-art oxygen and carbon dioxide sensors
  • Two analogue outputs, one for each gas detected
  • Maximum power consumption less than 5 watts
  • Designed to operate safely in a vacuum for four hours
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
In stock
This Automatic Pipette will help you get your lab up and running in no time—at a great price! Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Content
Key Features
  • Uses a GFC infra-red sensing technique ensuring the system is not sensitive to hydrogen or water vapor
  • Built-in auto-zero function ensures sensor stability
  • Real-time monitoring ensures rapid response to carbon monoxide (CO) issues as they occur
  • 90 days data-logging allows records to be stored and used should they ever be needed
  • Easy to maintain allowing you to be more self-sufficient whilst minimizing downtime
  • Designed specifically for the submarine environment so it is able to cope with the demands of the environment in terms of EMC, shock and temperature
 
Technical Specifications
Mechanical
Nominal cabinet dimensions (exc mounting lugs) 479 x 280 x 176 mm (h x w x d)
Nominal cabinet dimensions (inc mounting lugs) 479 x 360 x 200 mm (h x w x d)
Cabinet weight 11.6 kg
Cabinet material aluminium
Electrical
Electrical supply 115 V AC 60 Hz
Max power consumption 90W
Fuse rating (F1, F2): 20 mm, 2.5A anti-surge
Signal output 4-20 mA
EMC compliance MIL-STD-461F
ESD compliance EN 61000-4-2
Operating temperature range 0 to +45°C
Storage temperature 40 to +70°C
Operating pressure range 800 to 1400 hPa
Extended pressure range 600 to 800 hPa (Degraded performance over this pressure range)
Storage/transport pressure range 300 to 1400 hPa
Operating humidity range 0 to 80 %RH
Extended humidity range (up to 1 hour) 80 to 100 %RH
Storage humidity range 0 to 80 %RH (temporary max. 100 %RH)
Max. roll angle 15° (constant), 45° (temporary)
Max. pitch angle 10° (constant), 30° (temporary)
Shock Tested at 22g, 20ms (half sine) without shock isolation
Vibration NATO STANAG 4138
CO measuring range 0 to 200 ppm
Repeatability, measured at RTP ± (1 ppm CO + 1 display count)
Accuracy across normal operating environmental envelope ±5% full scale (equivalent to ± 10 ppm)
Zero drift ±1 ppm CO/day
Cross-sensitivity to hydrogen 2% vol H2 < 1 ppm CO
Cross-sensitivity to CO2 5% vol CO2 < 1 ppm CO
Response time T90 <60s

Click here to download Data Sheet
Click here to download Manual
Description
The HYP is a rugged and compact portable partial pressure monitor. Simple to operate, the HYP accurately reads oxygen (O2) levels within the hyperbaric environment.
O2 monitoring with the HYP
Classification bodies and industry guidelines within the diving market require each hyperbaric chamber to have a means of providing independent oxygen (O2) monitoring in the event of the primary monitor failing. The HYP is a portable PPO2 monitor capable of helping you to achieve such guidelines.  
Oxygen Sensor
The compact size allows for convenient fitting within confined spaces such as diving bells and hyperbaric lifeboats, or alternatively the unit can easily be hand carried. It is very simple to use, with just a single push-button to switch power on and off, and an LCD display. It may be used at depths of up to 600MSW / 2000FSW, and can also be used at surface pressures.
Technical Specification
HYP
Range 0.00 to 2.00bar ppO2
Accuracy ± 1% of reading, ± 1LSD
Sensor warranty 3 months
Sensor response <15 secs to T90
Sensor Life Up to 3 years in air at (STP)
Power 9V Alkaline (PP3)
Battery life 1 month (800 hours) continuous operation or 3 months operation for 8 hours per day
Electronics Warranty 1 Year
Operating temperature 0°C to 40°C
Operating pressure 0.8 to 60 bar absolute (approx. 600MSW/2000FSW)
Dimensions H 98mm x D 36mm x W 64 mm
Weight 200g
Replacement sensor 9100-9212-5H
Additional key features
Accurate and fast response to O2 levels
  • Compact and robust housing
  • Easy to read large display
  • Versatile, the HYP is suitable for use in; diving bells, hyperbaric chambers, hyperbaric lifeboats and submarines
  • Calibration every 6 months
Click here to download Data Sheet
Click here to download Quick Start Guide
Click here to download User Manual
CO2 MONITOR & ALARM DESIGNED FOR KIOSKS

The Ax60+ Kiosk is a CO2 monitor and alarm specifically designed by Analox to alert personnel to a build up/leak of CO2 using a state-of-the-art infrared sensor. The alarm provides both audio and visual alerts in the case of increased levels of carbon dioxide (CO2). Up to four alarms can be added as needed and the unit does not need periodic calibration.

CO2 monitoring with the AX60+ Kiosk
The Ax60+ Kiosk is a smaller version of the popular Ax60+ carbon dioxide (CO2) monitor. It is simple to wall mount in the area where carbon dioxide (CO2) is stored or piped. The Ax60+ Kiosk sensor needs to be installed at a height of 12-18 inches (305-457mm) above the floor – this is because the carbon dioxide (CO2) that leaks from a gas cylinder is denser than ambient air and can collect at low levels. The alarm should be located above the sensor at about head height or at the entrance to the kiosk.  
Technical Specification
Sensor Unit
Gas detected Carbon Dioxide (CO2)
Sensor technology Infrared
Range 0.1% to 5%
Default alarm set-points USA regulations (NFPA 55, IFC, NBIC, OSHA and NIOSH): TWA - 5,000ppm (0.5%) AL1 - 5,000ppm (0.5%) AL2 - 15,000ppm (1.5%) AL3 - 30,000ppm (3%) International/European regulations (EH40) (DIN 6653-2:2015-06 compliant, assessed by TUV): TWA - 5,000ppm (0.5%) AL1 - 15,000ppm (1.5%) CO2 - 30,000ppm (3%)
Warm up time 40 Seconds
Resolution 0.01%
Accuracy ±2.5% of the alarm levels
Response Time 30 seconds to T90
IP Rating IP55
LED indicators Green = Power
Alarm Unit
Strobe White LED strobe, with an option to change to blue, red or amber filter.
Sounder min 80 dBA @3 m (9.8 feet)
IP Rating IP55
LED indicators Green = Power, Amber = Fault
Cable 2m included
Performance characteristics
  • New 7.0-inch color touch screen

The new 7-inch color 16:9 widescreen high-resolution full touch screen control system provides a new fingertip touch operation experience.

  • 4-channel water quality and 3-channel flow monitoring on the host

Source water, secondary RO water, EDI deionized water, UP ultrapure w

  • The lab optimized standard two-stage reverse osmosis system

The use of dual pumps, dual membranes and transition water tanks reduces system energy consumption and wastewater, ensuring stable water quality under different source water conditions.

ater, 4-way water quality online monitoring and water quality exceeding standard alarm function.

1-way source water flow statistics, EDI deionized water and UP ultrapure water 2-way high-precision quantitative water extraction function.

  • Standard-50L PE pure water tank

The polyethylene pure water tank with conical bottom design contains an air filter, which can effectively absorb CO2, organic matter and filter bacteria and particles, and can be equipped with UV ultraviolet irradiation sterilization components.

Features and Advantages
  • Built-in 3-pump system with primary and secondary RO booster pumps and circulation disinfection pumps to achieve complete two-stage reverse osmosis, system circulation and disinfection functions
  • Full-level filter element alarm prompt function based on time and flow, showing the used and remaining life of consumables
  • Automatic detection and alarm functions such as system water shortage alarm, water tank full alarm, water quality exceeding standard alarm, consumable life end alarm, water leakage protection alarm, etc. provide safety guarantee
  • Fully automatic RO membrane anti-scaling flushing program (flushing interval and duration can be set) to extend the service life of the RO membrane
  • Built-in SD card, can store and view operation data charts and curves, and can be inserted into a USB flash drive for complete data export, providing data traceability
  • With USB interface system program upgrade function, and optional WIFI module
  • Built-in perpetual calendar clock, convenient for consumables management and service settings
  • Ultrapure water full pipeline dosing disinfection function, just add disinfection tablets to start the one-key disinfection program to ensure high-quality pure water
  • Ultrapure water circulation function, which can be started and shut down freely to maintain low bacterial contamination level in the system
  • Factory and customer secondary passwords, system parameter settings are all password protected to prevent unauthorized changes
  • Compatible with 2 pure water storage methods of pressure water barrels to meet different application needs
  • High-strength all-engineering plastic chassis, ergonomic design, beautiful appearance, no corrosion and rust, ensure the cleanliness of the machine body, in line with GLP specifications
  • Unique 4-door design, pretreatment, RO and ultra-purification components, EDI and TOC modules, water tanks and control components adopt independent modular structures, making system maintenance more convenient
  • Pipes and joints are NSF certified to minimize TOC precipitation in the system and ensure the highest pure water quality
  • Powerful pre-treatment components, combined with 5μm PP transparent filter, KDF composite filter, coconut shell water-washing grade precision activated carbon filter, effectively protect the RO membrane
  • DOW RO reverse osmosis membrane, RO membrane components optimized by The lab, achieve the combination of long life, stability and high desalination rate of RO membrane
  • The new integrated ultra-purification component of DOW resin ensures that the water produced reaches 18.2MΩ.cm and reduces TOC precipitation
  • Ultra-long life 254&185nm dual wavelength UV lamp, combined with medical grade 316L flow hood, effectively sterilizes, reduces TOC, and enhances the system's application range
  • UF ultrafiltration components, molecular weight cut-off: MWCO5000D, effectively remove pyrogens/endotoxins, can be used for precision cell culture and IVF
  • Double-layer terminal sterilizing filter, accuracy: (0.45+0.1)μm, using PES polyethersulfone composite filter membrane, double-layer filtration design to ensure the terminal effluent is sterile
 
Technical Parameters
name Basic Heat removal prototype Low organic matter type Comprehensive Built-in TOC monitor
model Super 10 Super 10F Super 10V Super 10FV Super-TOC10V Super-TOC 10FV
Pure water output 10 L/hour
Ultrapure water output Up to 2.0L/min (when there is water in the water tank)
Ultrapure water index
Resistivity (25℃) 18.2MΩ.cm
Total Organic Carbon TOC* <10ppb <10ppb <3ppb <3ppb <3ppb <3ppb
bacteria <0.01cfu/ml
Particles (>0.1μm) <1/ml
Pyrogens/endotoxins N/A <0.001Eu/ml N/A <0.001Eu/ml N/A <0.001Eu/ml
RNases N/A <1pg/ml N/A <1pg/ml N/A <1pg/ml
Deoxyribonucleases (DNases) N/A <5pg/ml N/A <5pg/ml N/A <5pg/ml
Pure water index
Resistivity* >5MΩ.cm
Total Organic Carbon (TOC)* <30ppb
Silicon Rejection Rate >99.9%
Source water requirements Urban drinking tap water, water temperature 5-45℃, water pressure 1.0-4.0Kgf/cm2
Size and weight Length × width × height: 545 × 470 × 649 mm, weight: about 35 kg
Electrical requirements 220-240V, 50/60Hz
power 240W
System Configuration Host (including 1 set of purification column) + TOC monitor (TOC type) + 50L PE ultrapure water storage tank
   
Description
The SV-Multigas-2 is a dual oxygen (O2) and carbon dioxide (CO2) monitor designed for vehicles operating in the upper atmosphere. Housed in a robust, compact enclosure, the unit is ideal for use in airborne delivery systems, satellites and aircraft cabins. Since 2014 the SV-Multigas-2 has been successfully used in rockets travelling to outer space. Flexibility The SV-Multigas-2 incorporates user maintainable analogue sensors that provide a 1 to 5 V output. This modular approach to gas monitoring ensures that our customers have the flexibility to integrate the unit into their own system. It can be either installed directly in the gas path or used for general air monitoring.  
Technical Specification
SV-Multigas-2
Operating temperature range 32 to 104 °F / 0 to 40 °C
Storage temperature range −4 to 140 °F / −20 to 60 °C
Operating pressure range 8.7 to 17.4 psia / 600 mbar to 1200 mbara
Vacuum tolerance normal operation of the SV-Multigas-2 will not be affected by 4 hour exposure to vacuum
Electrical supply 18 to 36 V DC, 100 mV ripple maximum
Power consumption 5 W maximum
2 analogue outputs are provided, one for each gas Zero output: 1.0 V, full-scale output: 5.0 V, warm-up/fault output: 0.25 V Outputs are isolated from the incoming power supply and from each other
O2 SENSOR
Range 0 to 5.80 psi pO2 / 0 to 400 mbar
Repeatability @ 14.5 psia, 70 °F / 1000 mbara, 21 °C ± 0.116 psi pO2 / ± 8 mbar
CO2 SENSOR
Range 0 to 0.14 psi pCO2 / 0 to 10 mbar
Repeatability @ 14.5 psia, 70 °F / 1000 mbara, 21 °C ±(0.0014 psi pCO2 + 1.1% of reading) / ±(0.1 mbar + 1.1% of reading)
 
Click here to download Data Sheet
This Automatic Pipette will help you get your lab up and running in no time—at a great price! Features:
  • Lowest operation and tip ejection forces
  • Fully autoclavable
  • Ultra light weight with space-age materials
  • Secondary adjustment option for various liquid classes
  • Spring loaded tip con
  • For transferring molecular samples and PCR mix solutions.
  • One set is for DNA work and the other for RNA work. Each with the following specs
  • Light weight, traditional tip shaft, and will fit all generic brands of tips
  • Equal to or better than accuracy and precision compared to ISO 8655, so results can be trusted.
  • Easy and quick volume adjustment with or without gloves. Foolproof volume lock prevents accidental volume changes.
  • Low maintenance and autoclavable 121° for at least 20 minutes
  • Quick release
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information

Related products

glass measuring cylinder 250ml
Add to cart
Add to wishlist
Scientific & Medical Education

Glass Measuring Cylinder 250ml

$6.20
ghh
Read more
Add to wishlist
Health Education

PERSONAL CO2/O2 MONITOR-ASPIDA

$0.00
glass measuring cylinder 1000ml
Add to cart
Add to wishlist
Scientific & Medical Education

Glass Measuring Cylinder 1000ml

$7.00
DAMS_PLC_FORE_01
DAMS_PLC_AFT_01_1-1536x1536
Read more
Add to wishlist
Health Education

DISTRIBUTED ATMOSPHERE MONITORING SYSTEM

$0.00
APM_02-787x787
Read more
Add to wishlist
Chemistry-Experiments

Atmosphere Protection Module

$0.00
SV-Multisensor2_01
Read more
Add to wishlist
Health Education

OXYGEN & CARBON DIOXIDE MONITOR

$0.00
hh
Read more
Add to wishlist
Chemistry-Experiments

Ax60+ Kiosk

$0.00
Ultra-Pure-Water-Purification-System-for-Science-Applications
Read more
Add to wishlist
Health Education

Super-Full Touch Screen Water Purification System

$0.00
Medium-RO
Read more
Add to wishlist
Health Education

Pilot-RO Water Purification System

$0.00
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • Rating
  • Price
  • Description
Click outside to hide the comparison bar
Compare