Deionized Water Purifier

Brands: Scitek

~~$0.00~~

Shipped From Abroad

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Sku:

SF1033560130127-45

Brands:: Scitek

Description
Reviews (0)

Description

Deionized Water Purifier Features:

The deionized water filter has power indicator, pump work indicator, low pressure indicator and system flushing indicator functions.
Using imported ion filtration membranes and high-pressure, silent pure water pumps, the operation quality is more reliable and it is applicable to a wider range of water quality;
It has system flushing function: every time before turning on the water machine, it will automatically flush for 30 seconds and then the system will start to make water;
The water deionizer filter has system protection function: when the water pressure is too low or there is no water, the equipment automatically shuts down, and when the water source comes in, the equipment automatically turns on;
WP-DU series deionized water filter has an online water quality monitoring function, which can monitor the incoming water quality (located above the instrument, near the function detection area, indicated by a digital tube), RO water quality and temperature, and pure water quality and temperature in real time.

Deionized Water Purifier Specifications:

Model		WP-D20U	WP-D30U	WP-D40U	WP-D50U	WP-D60U
Water Output Speed		20L/h	30L/h	40L/h	50L/h	60L/h
Water Supply Requirement		Tap water: TDS<200ppm; Water pressure>0.1Mpa;
Water Supply Requirement		Water temperature: 5-45℃
Pure Water Quality	Conductivity	0.1us/cm (25℃)
	PH Value (25℃)	None
	Oxidizable (Calculated as O)	Technical requirements: ≦0.08mg/L;
	Oxidizable (Calculated as O)	Test results: ≦0.08mg/L
	Evaporation Residue (105±2℃)	Technical requirements: ≦1.0mg/L;
	Evaporation Residue (105±2℃)	Inspection results: 0.7mg/L
	Inspection Basis	GB/T6682-2008
Consumption		25W
Control System		Operation mode display: power, water shortage, flushing, full water, inlet water quality monitoring, RO water quality and temperature UP water quality and temperature, etc.
Safety Performance		Automatically enters standby state when there is no water or low water pressure, and enters standby state when the system is full of water (constant pressure).
Purification System		Pretreatment unit, external softening filter (recommended in places with high raw water hardness); 1μm deep PP filter element*2+precision activated carbon filter element
RO Reverse Osmosis Unit		American original RO reverse osmosis membrane/membrane group
Post Purification Unit		Purification column
Standard Accessories		Host + accessory package
Shipping Size (WxDxH)(mm)		533x435x550
N.W/G.W		23kg/25kg	28kg/30kg		33kg/35kg

Reviews

There are no reviews yet.

Be the first to review “Deionized Water Purifier”

Quick Comparison

Settings Deionized Water Purifier remove AGD Erma EL-120 ELectrolyte Analyzer remove Motic BA210 Series Biomedical Microscope remove Avalun 48 INR Microcuvette remove Alcohol Pad Per Pack remove Plastic Urine Container Per Pack remove

Name Deionized Water Purifier remove AGD Erma EL-120 ELectrolyte Analyzer remove Motic BA210 Series Biomedical Microscope remove Avalun 48 INR Microcuvette remove Alcohol Pad Per Pack remove Plastic Urine Container Per Pack remove

Image

SKU SF1033560130127-45 SF1033560084-125 SF1033560084-78 SF1033560084-74 SF1033560084-64 SF1033560084-106

Rating

Price

~~$0.00~~

$1,320.00

~~$0.00~~

$4.25

$8.20

Stock

Out of stock

Availability Out of stock

Add to cart

Description

Shipped From Abroad

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad

Electrolyte Analyzer ERMA EL-120 is ideal for medium to high volume Laboratories and Hospitals . It offers reliable, automated samples handling and work flow offences . It also allows measurement of specific ions, accurately and precisely . This supports fast diagnosis of critically ill patients and reduces the risks of patient discomfort associated with repeated sampling Precise & Accurate Results Economical to use Large Touchscreen Display with Graphical User Interface. Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock The BA210 series is a line of basic biological microscopes manufactured by Motic. The unit is equipped with Motic Infinity Optics (CCIS®, offering quality performance in the fields of education and training. The device features a coaxial coarse and fine housing with a quadruple reverse-mounted nose piece. Its contrast methods, such as phase contrast, polarization and dark field, are easily performed through optional accessories. Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Out stock LabPad®’s versatility comes especially from its Tsmart® single-use microcuvette, which contains a lyophilized reagent specific to each test. The Tsmart® microcuvette is the fruit of numerous innovations that have led to many benefits for users. Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock Alcohol Pad (70% Isopropyl Alcohol Pre Pad, Alcohol Cleansing Swab). Clean the required area. Discard after single use. Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock

Total Volume: 60mL.
Specimen Container, Leak-proof, Ideal for Pathology/Histology/Cytology reagent pre-filling sample preparation.
Made of premium PP material, it is durable for usage.
Some measurements can be used to not only use urine samples, it can also be used for other liquids.

Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Content

Deionized Water Purifier Features:

The deionized water filter has power indicator, pump work indicator, low pressure indicator and system flushing indicator functions.
Using imported ion filtration membranes and high-pressure, silent pure water pumps, the operation quality is more reliable and it is applicable to a wider range of water quality;
It has system flushing function: every time before turning on the water machine, it will automatically flush for 30 seconds and then the system will start to make water;
The water deionizer filter has system protection function: when the water pressure is too low or there is no water, the equipment automatically shuts down, and when the water source comes in, the equipment automatically turns on;
WP-DU series deionized water filter has an online water quality monitoring function, which can monitor the incoming water quality (located above the instrument, near the function detection area, indicated by a digital tube), RO water quality and temperature, and pure water quality and temperature in real time.

Deionized Water Purifier Specifications:

Model		WP-D20U	WP-D30U	WP-D40U	WP-D50U	WP-D60U
Water Output Speed		20L/h	30L/h	40L/h	50L/h	60L/h
Water Supply Requirement		Tap water: TDS<200ppm; Water pressure>0.1Mpa;
Water Supply Requirement		Water temperature: 5-45℃
Pure Water Quality	Conductivity	0.1us/cm (25℃)
	PH Value (25℃)	None
	Oxidizable (Calculated as O)	Technical requirements: ≦0.08mg/L;
	Oxidizable (Calculated as O)	Test results: ≦0.08mg/L
	Evaporation Residue (105±2℃)	Technical requirements: ≦1.0mg/L;
	Evaporation Residue (105±2℃)	Inspection results: 0.7mg/L
	Inspection Basis	GB/T6682-2008
Consumption		25W
Control System		Operation mode display: power, water shortage, flushing, full water, inlet water quality monitoring, RO water quality and temperature UP water quality and temperature, etc.
Safety Performance		Automatically enters standby state when there is no water or low water pressure, and enters standby state when the system is full of water (constant pressure).
Purification System		Pretreatment unit, external softening filter (recommended in places with high raw water hardness); 1μm deep PP filter element*2+precision activated carbon filter element
RO Reverse Osmosis Unit		American original RO reverse osmosis membrane/membrane group
Post Purification Unit		Purification column
Standard Accessories		Host + accessory package
Shipping Size (WxDxH)(mm)		533x435x550
N.W/G.W		23kg/25kg	28kg/30kg		33kg/35kg

Parameters: Na+,K+,Cl-, iCa++ / Li
It works on ISE principle
Sample Type: Whole blood, Serum, Plasma, Urine
Low reagent consumption
Sample requirement is only 90ul
60 samples per hour
Automatic two point calibration after 4hrs and one point calibration with each sample analysis
Air bubble detection
Track reagents consumption and provides alerts
For low reagent volume
Precision testing facility to get CV and SD
Trilevel Quality Control with LJ plots of last 30days
Low aspiration volume
Fast sample processing
Accurate and Precise results

Technical Specifications:

Parameters	Na+, K+, Cl– /Ca++
Principle	Ion Selective Electrode (ISE)
Sample Type	Analyses whole blood, serum, plasma and urine
Sample Volume	≤100 µL
Analysis Time	≤60 seconds
Throughout	≤60 samples per hour
Data Link	Serial (RS232)
External Interface	USB (Keyboard, Mouse)
Operating Condition	10° C to 35° C, Relative Humidity up to 85%
Storage Condition	Temp: 10° C to 40° C
Relative Humidity	up to 85% non- condensing
Power Supply	100 to 240 VAC ±10%, 50Hz
Dimensions	395 x 260 x 375 mm
Weight	7.5 kg

Click Here To Download Catalogue

The BA210 series is a line of basic biological microscopes manufactured by Motic. The unit is equipped with Motic Infinity Optics (CCIS®, offering quality performance in the fields of education and training. The device features a coaxial coarse and fine housing with a quadruple reverse-mounted nose piece. Its contrast methods, such as phase contrast, polarization and dark field, are easily performed through optional accessories. Technical applications: Biomedical Type: Optical Observation technique: Dark field Magnification: 4 unit, 10 unit, 40 unit, 100 unit

LabPad®’s versatility comes especially from its Tsmart® single-use microcuvette, which contains a lyophilized reagent specific to each test. The Tsmart® microcuvette is the fruit of numerous innovations that have led to many benefits for users.

Features:

Fully automated "plug-and-play" behavior
Reduced blood volume (only 3µL)
A large space for blood drop-off
Fills up quickly, using just capillarity
Easy handling, thanks to its 3D shape
Optimized preservation in individual pouches, in boxes of 12, 24, or 48 units

Alcohol Pad (70% Isopropyl Alcohol Pre Pad, Alcohol Cleansing Swab). Clean the required area. Discard after single use. Size and packing of Medical Alcohol pad:

Pad Size: Unfolded: 30 x 60 mm (other size can be request ).
Folded: 30x30 mm, 30 x 35mm,can be 2ply or 4ply ( other size, ply can be request ).
Aluminum Package: 60 x 50 mm , 50 x 50mm approximate ( other size can be request ).
Packing: 100/200 pcs per inner box, 50/ 100 boxes per carton(packing can be request).

Use of Medical Alcohol pad:

For cleaning prior to injection or to disinfect the hurted skin for family and medical treatment organization use.
For preparation and immediate disinfection of skin, wound area orr Instrument and utensil.

Notice of Medical Alcohol pad:

Not for eyes;
keep out of reach of children;
For external use only;
please stop using if you feel allergic or amyctic

Materials - Non-Woven Fabric

Trademark - OEM/ODM

Specification - CE&ISO13485

Total Volume: 60mL.
Specimen Container, Leak-proof, Ideal for Pathology/Histology/Cytology reagent pre-filling sample preparation.
Made of premium PP material, it is durable for usage.
Some measurements can be used to not only use urine samples, it can also be used for other liquids.

Weight N/A N/A N/A N/A N/A N/A

Dimensions N/A N/A N/A N/A N/A N/A

Additional information