Horizontal Pulse Vacuum Autoclave, Motor Hinge Door

Advantages of Horizontal  Pulse Vacuum Autoclave:

1. Intelligent maintenance system: Horizontal pulse vacuum autoclave is equipped with MNcold Internet of Things remote monitoring and maintenance module, it can connect to computers, tablets, or smartphones to access real-time information of the equipment, including real-time and historical operational data, fault troubleshooting notifications, and remote software upgrades. It has sterilization programs for fabrics, instruments, lumen instruments, rubber, liquids, custom programs, as well as testing programs such as BD testing and vacuum leak testing.
2. Pulsation modes: Horizontal pulse vacuum autoclave adopts negative pressure pulsation, cross-pressure pulsation, and positive pressure pulsation modes, with an air elimination rate greater than 99.99%. This saves steam consumption and improves steam sterilization and drying efficiency.
3. Flash steam vacuum drying technology, with fabric drying degree less than 0.6% and instrument drying degree less than 0.1%.
4. Real-time printing of process data through the built-in printer, equipped with paperless recorders for pharmaceutical customers.
5. Pipeline system: Stainless steel sanitary-grade pipelines with clamp connections. All welds are done using automatic pipe welding machines. The main control valves are imported German angle seat valves and solenoid valves, with a German SPECK direct-coupled water ring vacuum pump.
6. Supply system detection and alarm system: Equipped with steam, water source, and power phase sequence detection and alarm devices. If the supply system fails to meet the equipment's operating conditions, it will automatically sound an alarm and prevent program startup and termination.
7. It has an automatic drainage temperature regulation system, with a drainage temperature below 60℃.

Horizontal Pulse Vacuum Autoclave Features:

1. Sliding door with detachable gear meshing seal structure, driven by motor chain to lift the door up and down.
2. Double door passage type, equipped with pressure safety interlock and temperature safety interlock for liquid programs, with mutual interlocking of the double doors.
3. The automatic sealing is achieved by the inflatable pressure-driven sealing ring. The new high-quality tear-resistant silicone rubber material circular hollow door sealing ring is coated with a special surface treatment, which is wear-resistant and smooth, providing better sealing effect and longer service life, with a lifespan of up to 1500 cycles.
4. The main body structure is rectangular in section, with a European-style circular reinforcement rib sleeve flangeless structure, and the sealing groove is directly welded to the two end circular sleeves.
5. Control system: Siemens programmable logic controller (PLC) and color touch screen, the entire process is automatically controlled by the program, automatically displaying the operation status, operation curve, and parameters such as temperature, pressure, and time.

Click Here To Download Catalogue 

• Cooperation with the CardioTEST cardiovascular exercise system and AsTER cardiac rehabilitation system,
• Control using a computer through the RS-232 port,
• Braking: a processor-controlled brake with torque measurement,
• Load range: 25 - 1000 W,
• Speed ​​range: 20 - 150 rpm,
• Load independent of the number of turns,
• Built-in ECG module,
• 12 standard leads in diagnostic mode,
• 2 leads in training mode,
• Sensitivity 2,5 / 5/10/20 mm / mV,
• Shift 25/50/100 mm / s,
• Digital filters 25 Hz, 35 Hz, 50 Hz, anti-frit filter,
• Digital filter of the isoelectric line,
• Measuring range HR 15-240 bpm,
• Maximum patient weight 200 kg,
• Power supply: 230 V, 50 Hz, 60VA,
• Dimensions: (LxWxH) 1190x600x1370 mm.

• excellent quality of ECG waveforms thanks to the use of digital filters eliminating the swimming of the isoelectric line and disruption of muscle origin,
• uninterrupted recording and presentation of 12-lead ECG signal,
• presentation of averaged P-QRS-T units with 12 leads along with the results of ST level and slope measurements,
• automatic HR measurement, ST level and ST segment slope,
• automatic control of cycloergometer and treadmill load,
• archiving and printing of the research report,
• automatic determination of measuring points with the possibility of manual correction,
• automatic arrhythmia analysis,
• presentation of parameters regarding: test phase, current load, stage time and total effort time,
• monitored parameters: rhythm rate, MET, double product, blood pressure, level, ST segment slope and load,
• real-time ECG printout,
• preview of trends of all measured parameters during the test,
• alarm system for monitored parameters and arrhythmia,
• an option to automatically measure blood pressure,
• archiving and printing a report enabling a reliable assessment of the study (such an report contains ECG, average P-QRS-T assemblies and a table with measurement results),
• standard test protocols and the ability to define your own protocols also in RAMP mode,
• preview the report on the screen before printing the report,
• function of reanalysis of the performed test,
• presentation of 3D trends illustrating ST segment changes.

Click Here To Download Catalogue 

• Provides convenient user interface and easy operation
• Anatomical view-based digital image processing
• Radiographic stand and automatic collimator control function
• DICOM 3.0 networking interface features include: work-list, print, store, and query for
• integration with any PACS or RIS.

• Outstanding image quality by optimized digital image processing
• Easy driving and maneuverable with ergonomic and compact design
• Convenient and enough space for detector, battery and other necessary stuff
• Swift mobility with 5km/h speed allows you to save time, cost and satisfy your patient with quick processing
• Accurate positioning and precise movement provided with 4 direction buttons on this control panel
• Longer arm stroke and high column provide wider coverage and patient-friendly operation service
• A safety function with front safety bumper & brake, spring loaded front wheel and status LED indicator
• Provide best satisfaction and convenience for your patient and operator. It will prevent any unexpected and secondary accident

• Output Rating   - 32kW/40kW
• kVRange          - 40 to 125V/150kV
• mA Range        - 10 to 400mA/500mA
• mAs Range      - 0.1 to 400mA/500mAs

• Size – 14X17inch
• Scintillator - Csl/GOS
• Type - Wireless

Click Here To Download Catalogue

Sonoscape S8 Exp Portable Ultrasound scanner

Click Here To Download Catalogue