View cart “ASPEL AsCARD Coral PC Based ECG Machine” has been added to your cart.

O2 Generating Systems

Brands: Medbirlesim

~~$0.00~~

Shipped From Abroad

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Sku:

SF1033560130175-1

Brands:: Medbirlesim

Description
Reviews (0)

Description

Oxygen is generated from clean, dry, and compressed air by a separation process which uses the principle of selective adsorption. The air is passed through a bed of Zeolite Molecular Sieves which has a property of a very high degree of affinity to nitrogen. The Zeolite contains an infinite number of micropores and it retains the adsorbed nitrogen molecules in these pores.

Before this process is affected, the compressed air has to be purified by removing all contaminants i.e. solids, condensed liquids, and oil & water vapors by passing it through a Prefilter. Oil Removal Filter (not required if oil-free Compressor is used) and Air Dryer.

The dry & oil-free air from Air Dryer is stored in a Dry Air Receiver before it enters the PSA System. In this System, there are two adsorbers filled with ZMS, where nitrogen along with any traces of moisture, are adsorbed and product gas (dry oxygen) comes out and passes to the Oxygen Surge Vessel. In the PSA System, one adsorber is in the production cycle while the other is regenerated (desorbed) by depressurization.

The two adsorbers keep switching from adsorption to desorption automatically, through a sequence timer. The pressure in the adsorbers swings from atmospheric pressure to line pressure, which is why this process is known as Pressure Swing absorption (PSA).

Includes:

Oil Screw Air Compressor @ 7,5bar
Compressed Air Tank ( Max 16Bar ) with Drain Valve
Line Filter ( WS )
Line Filter ( P : 3 mic / — mg/m3 )
Line Filter ( X : 0.1 mic / 0.1 mg/m3 )
Dryer ( Refrigerant Type / +3˚C )
Line Filter ( Y : 0.1 mic / 0.01 mg/m3 )
Line Filter ( AC : — mic / 0.003 mg/m3 )
O2 Generator ( PSA )
* 2 molecular sieve beds,
* 1 pneumatic equipment
* 1 electrical equipment
Main technical data :
… produced oxygen flow
… produced oxygen concentration level : % 95 ~ +/- 1
… produced oxygen pressure level: 4.5 – 6 bar
Galvanized O2 Storage Tank ( Max 16 Bar )
Connection Equipment

Optional Equipment:

O2 Cylinder Filling High Pressure Compressor
Cylinder Manifold Station

Reviews

There are no reviews yet.

Be the first to review “O2 Generating Systems”

Quick Comparison

Settings	O2 Generating Systems remove	DrGem Ceiling Analogue X-ray Machine remove	ASPEL AsPEKT 712 Holter Monitor and Software remove	Bistos BT-770-12.1" Touchscreen Patient Monitor remove	ASPEL AsCARD Grey ECG Machine remove	DrGem GXR-SD 400mA Floor Mounted Digital X-ray remove
Name	O2 Generating Systems remove	DrGem Ceiling Analogue X-ray Machine remove	ASPEL AsPEKT 712 Holter Monitor and Software remove	Bistos BT-770-12.1" Touchscreen Patient Monitor remove	ASPEL AsCARD Grey ECG Machine remove	DrGem GXR-SD 400mA Floor Mounted Digital X-ray remove
Image
SKU	SF1033560130175-1	SF1033560074-7	SF1033560075-4	SF1033560059-1	SF1033560075-5	SF1033560074-5
Rating
Price	~~$0.00~~	~~$0.00~~	$1,991.00	$902.00	$1,166.00	~~$0.00~~
Stock
Availability
Add to cart	Read more	Read more	Add to cart	Add to cart	Add to cart	Read more
Description	Shipped From Abroad Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.	Shipped from abroad The DrGem Ceiling Analogue X-ray Machine is a diagnostic radiography system that provides reliable high quality radiographic images with a reduced dose. The reliable high-frequency x-ray generators that are known worldwide for their excellent performance, lifetime and stability. Patient tables and wall stands are also offered. Delivery & Availability: Typically 21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.	Shipped from Abroad The Holta Monitor allows quick analysis of ECG examination and detection, reviewing and editing capability in the qualitative assessment of VE, VT, Single SVE, PSVT, Pauses, Irregular Rhythm, VT, IVR, Brady - and Tachycardia, Couplets, ST-segment elevation and depression, Maximum, Minimum and averaged Heart Rates, artifacts Delivery & Availability: Typically 10 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.	Shipped from Abroad The Bistos BT-770 patient monitor is equipped with a 12.1" touchscreen display, which allows for an easy operation and readability with a powerful rechargeable battery guaranteeing a continuous operation of 5 hours to monitor ECG, SpO2, NIBP, temperature and respiration Delivery & Availability: Typically 14 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.	Shipped from Abroad Electrocardiograph AsCARD Grey v.07.225 - is a 1, 3, 6, 12 channel ECG unit which enables to make electrocardiogram in full 12 leads. It is intended to conduct ECG examinations of adults and paediatric patients in all types of health care centres. ECG examination may be recorded in manual or automatic mode, with the possibility of analysis and interpretation. The device can be powered from 100 V ÷ 240 V mains supply or by an internal battery. Delivery & Availability: Typically 10 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.	In Stock The GXR-SD Digital X-ray is a diagnostic digital radiography system that provides reliable high quality digital radiographic images with a reduced dose. The GXR-SD DR systems offer comprehensive digital solutions to all radiography needs, featuring ACQUIDR digital imaging system with stationary or portable digital flat-panel detectors as well as reliable high-frequency x-ray generators that are known worldwide for their excellent performance, lifetime and stability. Patient tables and wall stands are also offered. Delivery & Availability: Typically 21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Content	Oxygen is generated from clean, dry, and compressed air by a separation process which uses the principle of selective adsorption. The air is passed through a bed of Zeolite Molecular Sieves which has a property of a very high degree of affinity to nitrogen. The Zeolite contains an infinite number of micropores and it retains the adsorbed nitrogen molecules in these pores. Before this process is affected, the compressed air has to be purified by removing all contaminants i.e. solids, condensed liquids, and oil & water vapors by passing it through a Prefilter. Oil Removal Filter (not required if oil-free Compressor is used) and Air Dryer. The dry & oil-free air from Air Dryer is stored in a Dry Air Receiver before it enters the PSA System. In this System, there are two adsorbers filled with ZMS, where nitrogen along with any traces of moisture, are adsorbed and product gas (dry oxygen) comes out and passes to the Oxygen Surge Vessel. In the PSA System, one adsorber is in the production cycle while the other is regenerated (desorbed) by depressurization. The two adsorbers keep switching from adsorption to desorption automatically, through a sequence timer. The pressure in the adsorbers swings from atmospheric pressure to line pressure, which is why this process is known as Pressure Swing absorption (PSA). Includes: Oil Screw Air Compressor @ 7,5bar Compressed Air Tank ( Max 16Bar ) with Drain Valve Line Filter ( WS ) Line Filter ( P : 3 mic / — mg/m3 ) Line Filter ( X : 0.1 mic / 0.1 mg/m3 ) Dryer ( Refrigerant Type / +3˚C ) Line Filter ( Y : 0.1 mic / 0.01 mg/m3 ) Line Filter ( AC : — mic / 0.003 mg/m3 ) O2 Generator ( PSA ) * 2 molecular sieve beds, * 1 pneumatic equipment * 1 electrical equipment Main technical data : … produced oxygen flow … produced oxygen concentration level : % 95 ~ +/- 1 … produced oxygen pressure level: 4.5 – 6 bar Galvanized O2 Storage Tank ( Max 16 Bar ) Connection Equipment Optional Equipment: O2 Cylinder Filling High Pressure Compressor Cylinder Manifold Station	DrGem Ceiling Analogue X-ray Machine is a diagnostic radiography system X-ray Machine that provides reliable high quality radiographic images with a reduced dose. The reliable high-frequency x-ray generators that are known worldwide for their excellent performance, lifetime and stability. Patient tables and wall stands are also offered. Features of DrGem Ceiling Analogue X-ray Machine TS-CSA-A (Vertical movement, 1.6m stroke, rail length 3x4meter) including HV cable 15m WBS-TA: Vertical movement V Stroke:1,450mm in Uprigh Bucky Position, 1,526mm in Horizontal Bucky position. PBT-4 is a 4 way Floating Tabletop with. A large tabletop with extended travel enables all radiography studies with minimal patient movement. Fully fat tabletop without a frame on the edge makes cleanliness and odors free Technical Specifications of DrGem Ceiling Analogue X-ray Machine Power Rating - 32KW Generator - GXR-32S Rotor - Dual Speed Starter(DSS) Input Power - 400/480VAC, Three phase Line Frequency - 50/60Hz X-ray tube - DXT-12M, (0.6/1.2mm, 300kHU) Tube Voltage - 40 to 150kV, 1kV Step Tube Current – 10 to 640mA Output - 640mA@81kV, 500mA@104kV, 400mA@130kV, 320mA@150kV Time Range - 1ms to 10s mAs Range - 0.1 to 800mAs Reproducibility - Coecient of Variation : kV < 0.005, Time < 0.005,mAs < 0.01 Accuracy - kV < ±(1%+1kV), mA < ±(3%+1mA), Time <±(1%+0.5ms), mAs < ±(3%+0.1mAs) Linearity - Coecient of Linearity < 0.01 : CL = (X1-X2)/(X1+X2), where X is mR/mAs Mechanical Parts: -TS-CSA-A (Vertical movement, 1.6m, stroke rail length 3x4meter) including HV cable 15m - PBT-4: 4 way Floating Tabletop with Elevating Feature (66cm). - WBS-TA: a. Vertical movement V Stroke:1,450mm in Upright Bucky Position, 1,526mm in Horizontal Bucky position. - HVC-15: 15M HV cable - Auto Collimator *Click Here To Download Catalogue*	The Holter Monitor allows quick analysis of ECG examination (arrhythmias and ST segment). *Technical specifications: HolCARD 24W Software: fully compatible with Microsoft Windows environment unbeatable tool for alternative placement of electrodes independent analysis of the ST segment in all recorded channels, the positioning of all measurement points is user-reconfigurable and may depend on heart rate simultaneous arrhythmia detection in all three channels automatic signal calibration independent in all channels assures the use of all dynamic range available detection, reviewing and editing capability in the qualitative assessment of VE, VT, Single SVE, PSVT, Pauses, Irregular Rhythm, VT, IVR, Brady - and Tachycardia, Couplets, ST-segment elevation and depression, Maximum, Minimum and averaged Heart Rates, artifacts validation tool for beat classification making the correction easy and effective tabular hourly summaries all quantitative results printing of all recorded ECG signal available AsPEKT 712 Recorder: 12-channel digital registration of the ECG signal 10-lead patient cable registration time: 48 hours or 7 days on SD card built-in the real time clock EVENT button pacemaker detection dimensions: 72x76x23 mm Click Here To Download Catalogue*	Bistos BT-770 is a 12.1" touchscreen patient monitor designed for easy operations. SPECIFICATIONS 12.1“ color TFT touch screen ECG, Resp., SpO2, NIBP, Temp., CO2, IBP, Multi-gas, C.O., Masimo SpO2 Precise ECG measurement with pacemaker detection ST segment and 16 types of arrhythmia analysis Double overpressure protection for NIBP Intelligent cuff inflation pressure adjustment Smart Hook/Stand design, provide multiple placement modes Plug & Play Modular IBP& C.O., Modular Printer Multiple configuration options: 4-channel IBP, CO2, invasive C.O., Multi-gas Over 5 hours continuous working on battery 12-15V wide range DC input, suitable for ambulance Capable to connect with central monitoring system HL7 export to clinical information systems (option) *Click Here To Download Catalogue*	Electrocardiograph AsCARD Grey v.07.225 - is a 1, 3, 6, 12 channel ECG unit which enables to make electrocardiogram in full 12 leads. It is intended to conduct ECG examinations of adults and paediatric patients in all types of health care centres. ECG examination may be recorded in manual or automatic mode, with the possibility of analysis and interpretation. The device can be powered from 100 V ÷ 240 V mains supply or by an internal battery. Technical Specification:1. Visualisation of 1, 3, 6 or 12 ECG waveforms, analysis results and interpretations, examinations stored in memory. 2. Recording of 12 standard leads. 3. Print out in 1, 3, 6 or 12 ECG waveforms mode. Printing of a selected group: 1 channel - (I, II, III, aVR, aVL, aVF, V1, V2, V3, V4, V5, V6), 3 channels in standard format - (I-II-III, aVR-aVL-aVF, V1-V2-V3, V4-V5-V6), 3 channels in Cabrera format - (aVL-I-aVR, II-aVF-III, V1-V2-V3, V4-V5-V6), 6 channels in standard format - (I-II-III-aVR-aVL-aVF, V1-V2-V3-V4-V5-V6), 6 channels in Cabrera format - (aVL-I-aVR-II-aVF-III, V1-V2-V3-V4-V5-V6), 12 channels in standard format - (I-II-III-aVR-aVL-aVF-V1-V2-V3-V4-V5-V6), 12 channels in Cabrera format - (aVL-I-aVR-II-aVF-III-V1-V2-V3-V4-V5-V6). 4. Available types of examinations: manual, AUTO, SPIRO, automatic to clipboard, AUTOMANUAL, LONG (v.07.xx5). 5. Automatic record ECG signal from all 12 leads simultaneously, with save to temporary memory function, then depending on the settings: print out examination's result, analysis, interpretation or save to database. 6. Adjustable length of automatic examination recording — interval of 6–30 seconds. 7. Reverse recording in automatic examination to clipboard and in manual examination (v.07.xx5). 8. Rhythm print out in AUTO examination and automatic examination to clipboard. 9. Definable stages of examination according to set up parameters in AUTOMANUAL examination. 10. Storing an examination in memory, 1–15 minutes in LONG mode (v.07.xx5). 11. ECG printed directly from the electrocardiograph using PCL5/6 printer. 12. Printout from database. Possibility to printout additional information about examination or patient. 13. Alpha-numerical soft-key keyboard with functional buttons. 14. Possibility to set parameters: speed, sensitive, intensity of printing. 15. Menu displayed on the screen for easy operation using touch panel. 16. Database of patients and examinations. Internal memory up to 1000 patients, 1000 examinations. 17. Viewing of the memory-stored examinations on display, with the possibility of changing the number of leads, augmentation and speed. 18. Automatic analysis and interpretation in compliance with EN 60601-2-51 (CSE database) - Analysis and interpretation dependable on age & sex of a patient. 19. Up to 130 automatic examinations in battery mode. 20. Continuous heart rate (HR) measurement and display. 21. Adapted to direct operation on an open heart. 22. Device allows to enable and disable the following filters: power line interference filter; filters available: 50 Hz, 60 Hz, muscle interference filter; filters available: 25 Hz, 35 Hz, 45 Hz, contour line filters; filters available: 0.15 Hz, 0.45 Hz, 0.75 Hz, 1.5 Hz, the low-pass filter (v.07.224, v.07.324, v.07.225, v.07.325): 75 Hz, 100 Hz, 125 Hz, 150 Hz, the auto-adaptive filter (v.07.224, v.07.324, v.07.225, v.07.325). 23. Detection of electrode detachment, independent for each channel (INOP control). 24. Detection of cardiac stimulator. 25. Sound signalling of detected stimulations of heart stimulator. 26. Protection against defibrillation pulse. 27. ECG recordings optionally saved on PenDrive, send on email or to other AsCARD via EKG-MAIL. 28. Wireless communication with the LAN or the Internet (v.07.3xx). 29. Wired communication with the LAN or the Internet. 30. Cooperation with CardioTEKA and CardioTEL. 31. Possibility of accepting orders for examination and sending back the results in HL7 standard via Internet (v.07.3xx). 32. Possibility of conducting preliminary spirometry examinations by using SPIRO-31 attachment. 33. EMR – keep performed examinations in specified period of time on external data storage (USB memory). Accessories 1. Limb electrodes, 4 pieces (EKK type). 2. Chest electrodes, 6 pieces (EPP type). 3. KEKG 30R ECG cable. 4. Main cable. 5. R-A4 paper, 112 mm wide (1 reel). 6. ECG gel. 7. Operation manual. *Click Here To Download Catalogue*	DrGem GXR-SD 400mA Floor Mounted Digital X-ray system matches with a radiographic room which perfectly fits your workow and can be easily upgraded to DR system with the help of DR interface and PC interface in GXR generator as well as Bucky suitable to Flat Panel Detector. GXR X-ray system is equipped with a high frequency X-ray generator which consistently produces high quality radiograph in favor of high quality X-ray output with a very small kV ripple and accurate mA and mAs. GXR X-ray system is designed to provide convenience to operator and comfort to patient Features of DrGem GXR-SD 400mA Floor Mounted Digital X-ray: PBT-6 is a 4 way Motorized Tabletop with Elevating feature (66cm). A large tabletop with extended travel enables all radiography studies with minimal patient movement. Fully fat tabletop without a frame on the edge makes cleanliness and odors free Automatic Stitching - GXR-SD system provides outstanding automatic stitching function with Source tilting method Digital Flat Panel Detector (FPD) – Wireless 17X14 (Csl, 4336W) with Auto Exposure Detection (AED) function, there is no DR trigger cable between detector and generator. Full Featured Imaging Software & Excellent Digital Image Processing: Provides convenient user interface and easy operation Anatomical view-based digital image processing automatically optimizes and enhances the quality of the captured image for the pictured anatomy. Radiographic stand & automatic collimator control function DICOM 3.0 networking interface includes Worklist, Print, Store, Query for integration with any PACS or RIS Included – Software, HP Laptop Computer CPU≥3.2GHz Memory capacity：≥4GB Hard drive capacity ：≥500 GB Resolution: 1280 x 1024 Display size： 21 inch color LCD screen 64 bit Windows 10 operation system Core: i5 Technical Specifications of DrGem GXR-SD 400mA Floor Mounted Digital X-ray: Power Rating - 32KW Generator - GXR-32S Rotor - Dual Speed Starter(DSS) Input Power - 400/480VAC, Three phase Line Frequency - 50/60Hz X-ray tube - DXT-12M, (0.6/1.2mm, 300kHU) Tube Voltage - 40 to 150kV, 1kV Step Tube Current – 10 to 640mA Output - 640mA@81kV, 500mA@104kV, 400mA@130kV, 320mA@150kV Time Range - 1ms to 10s mAs Range - 0.1 to 800mAs Reproducibility - Coecient of Variation : kV < 0.005, Time < 0.005,mAs < 0.01 Accuracy - kV < ±(1%+1kV), mA < ±(3%+1mA), Time <±(1%+0.5ms), mAs < ±(3%+0.1mAs) Linearity - Coecient of Linearity < 0.01 : CL = (X1-X2)/(X1+X2), where X is mR/mAs *Click Here To Download Catalogue*
Weight	N/A	N/A	N/A	N/A	N/A	N/A
Dimensions	N/A	N/A	N/A	N/A	N/A	N/A
Additional information