SUB_ASPIDA_01-2
/

PERSONAL CO2/O2 MONITOR-SUB-ASPIDA

Brands: Analox

$0.00

Shipped From Abroad

Key features
  • It is the only portable monitor to be pressure corrected ensuring no false readings are given
  • The Sub Aspida is compact in size (127 x 44 x 90mm LxDxW)
  • The oxygen (O2) sensor can be calibrated on air, reducing costly gas requirements and making you self sufficient in the maintenance of the sensor
  • The carbon dioxide (CO2) sensor only needs calibrating every 12 months
  • OLED (Organic Light Emitting Diode) display
  • Pressure compensated CO2 & O2 sensors
  • Rechargeable battery-operated (NiMH)
  • Datalogging
  • Man-down alarm
  • Can offer continuous monitoring or spot checking
  • Audio, visual and vibration alarms
  • TWA (Time Weighted Average) Alarm
  • User maintainable
  • Can be worn on the belt or clipped to a panel
  • Pressure range of 700-1200mbara
  • Maintenance reminders as standard
Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
SF1033560130141-13
Brands:: Analox

Description

Description

The Sub Aspida is a personal, portable monitor which is used to detect levels of carbon dioxide (CO2) and oxygen (O2) in pressurized environments.

CO2 monitoring & O2 monitoring with the Sub Aspida

Unlike industrial sensing monitors, the Sub Aspida was designed with pressure corrected sensors, giving you 100% confidence in your readings.

The Sub Aspida has been upgraded to support those who work at high altitude.

Pressure tested to 10,000 ft or 700 MB, the Sub Aspida will remain accurate and reliable when monitoring CO2 and O2 in the atmosphere, meaning you can concentrate on the job at hand!

 

Technical Specification

    SUB-ASPIDA

    Operating temperature 0°C to +50°C
    Operating pressure 700 to 1200 mbara
    Humidity Range 0 to 99% RH
    Display High-visibility, Organic Light Emitting Diode (OLED) display
    Alarm horn 95dB @ 30cm
    LED indicators 1 x Green – OK, 1 x Amber – Fault, 1 x Red – Alarm
    Internal data log 1 log every 30 seconds for at least 7 days of continuous use
    Batteries 2 x NiMH 2100mAh AA batteries (or suitable AA type batteries)
    Battery discharge time 12 hours under normal operation (Passive atmospheric monitoring, minimal user interaction, no alarms)
    Battery lifespan 2 years
    Battery charge time 4.5 hours (from flat)
    Charge power supply rating 9 V DC – 0.55A, DC jack 5.5×12.0x2.1mm centre +ve
    Electronics warranty 2 years
    IP rating IP65
    Dimensions 127 x 44 x 90 mm / 5 x 1.7 x 3.5 inches (LxDxW)
    Weight 335g/11.8oz , O2 350g/12.3oz, CO2 335g/11.8oz

    SENSORS

    CO2 Sensor Unit O2 Sensor Unit
    Sensor type Analox infrared MIR Electrochemical
    Accuracy (at standard temperature and pressure) ±(1% of full scale + 2% of reading) ±1% of full scale (For best performance, calibrate the Sub Aspida while on battery power only.)
    Range 0.01 to 50.0 mbar ppCO2 (0.01 to 5% at 1000 mbara) 0.1 to 2000.0 mbar ppO2 (0.1 to 100% O2 at 1000 mbara)
    Response time T90 <60 seconds T90 <30 seconds
    Sensor life span 5 years 1 year (expected)

     

     

    Reviews

    There are no reviews yet.

    Be the first to review “PERSONAL CO2/O2 MONITOR-SUB-ASPIDA”

    Your email address will not be published. Required fields are marked *

    Quick Comparison

    PERSONAL CO2/O2 MONITOR-SUB-ASPIDA removePORTABLE OXYGEN MONITOR removeAx60+ Kiosk removeSuper-Full Touch Screen Water Purification System removeCARBON MONOXIDE ATMOSPHERE MONITORING SYSTEM removeSonoscape S11 Ultrasound Machine remove
    NamePERSONAL CO2/O2 MONITOR-SUB-ASPIDA removePORTABLE OXYGEN MONITOR removeAx60+ Kiosk removeSuper-Full Touch Screen Water Purification System removeCARBON MONOXIDE ATMOSPHERE MONITORING SYSTEM removeSonoscape S11 Ultrasound Machine remove
    Image
    SKUSF1033560130141-13SF1033560130141-18SF1033560130141-6SF1033560130126-3SF1033560130141-2SF1033560012-1
    Rating
    Price

    $0.00

    $0.00

    $0.00

    $0.00

    $0.00

    $6,380.00

    Stock
    Availability
    Add to cart

    Read more

    Read more

    Read more

    Read more

    Read more

    Add to cart

    DescriptionShipped From Abroad
    Key features
    • It is the only portable monitor to be pressure corrected ensuring no false readings are given
    • The Sub Aspida is compact in size (127 x 44 x 90mm LxDxW)
    • The oxygen (O2) sensor can be calibrated on air, reducing costly gas requirements and making you self sufficient in the maintenance of the sensor
    • The carbon dioxide (CO2) sensor only needs calibrating every 12 months
    • OLED (Organic Light Emitting Diode) display
    • Pressure compensated CO2 & O2 sensors
    • Rechargeable battery-operated (NiMH)
    • Datalogging
    • Man-down alarm
    • Can offer continuous monitoring or spot checking
    • Audio, visual and vibration alarms
    • TWA (Time Weighted Average) Alarm
    • User maintainable
    • Can be worn on the belt or clipped to a panel
    • Pressure range of 700-1200mbara
    • Maintenance reminders as standard
    Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
    		Shipped From Abroad
    Key Features
    • Fitted with a temperature compensated sensor which offers an expected 3 year life
    • Water and drop resistance, perfect for when using onboard diving trips
    • Compact and robust with minimal maintenance costs
    • Fast and easily transportable
    Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
    		Shipped From Abroad
    Key Features
    • Low maintenance
    • Quick Connect System
    • Pre-wired, ready to go
    • Can support up to 4 alarm units
    • Push button for unit testing
    Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
    		Shipped From Abroad The Super series uses city tap water as the water source, and can easily and quickly produce secondary RO (reverse osmosis) water, EDI deionized water and UP ultrapure water. It uses a standard two-stage reverse osmosis system and Ionpure EDI technology and modules to continuously produce Class II pure water with a TOC of more than 10MΩ.cm (25℃) and <30ppb, and ultrapure water of 18.2MΩ.cm (25℃). System water output: 10 liters/hour, and the daily output of pure water can reach 240 liters.
    Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
    		Shipped From Abroad

    The COSAMS unit was designed specifically for use on submarines, most directly those that operate on diesel engines. Built to exacting military standards for performance, reliability and endurance, the Analox COSAMS uses proprietary Gas Filter Correlation (GFC) technology to specifically analyze the unique properties of CO.

    The COSAMS (Carbon Monoxide Submarine Atmosphere Monitoring System) has been designed for use on submerged submarines to support life, where crew can be living and working for up to 90 days. Carbon monoxide can be generated on a submarine in several ways, from cooking and fire, to the incomplete combustion of diesel fuel and chlorate candles.
    Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
    		In Stock A Value Choice beyond Your Expectation. SonoScape’s trolley color Doppler system S11 redefines price and performance with practical design. The S11 will go beyond your expectations but not your budget. Delivery & Availability: Typically 2 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
    Content
    Description
    The Sub Aspida is a personal, portable monitor which is used to detect levels of carbon dioxide (CO2) and oxygen (O2) in pressurized environments.
    CO2 monitoring & O2 monitoring with the Sub Aspida
    Unlike industrial sensing monitors, the Sub Aspida was designed with pressure corrected sensors, giving you 100% confidence in your readings. The Sub Aspida has been upgraded to support those who work at high altitude. Pressure tested to 10,000 ft or 700 MB, the Sub Aspida will remain accurate and reliable when monitoring CO2 and O2 in the atmosphere, meaning you can concentrate on the job at hand!  
    Technical Specification
      SUB-ASPIDA
      Operating temperature 0°C to +50°C
      Operating pressure 700 to 1200 mbara
      Humidity Range 0 to 99% RH
      Display High-visibility, Organic Light Emitting Diode (OLED) display
      Alarm horn 95dB @ 30cm
      LED indicators 1 x Green - OK, 1 x Amber - Fault, 1 x Red - Alarm
      Internal data log 1 log every 30 seconds for at least 7 days of continuous use
      Batteries 2 x NiMH 2100mAh AA batteries (or suitable AA type batteries)
      Battery discharge time 12 hours under normal operation (Passive atmospheric monitoring, minimal user interaction, no alarms)
      Battery lifespan 2 years
      Battery charge time 4.5 hours (from flat)
      Charge power supply rating 9 V DC - 0.55A, DC jack 5.5x12.0x2.1mm centre +ve
      Electronics warranty 2 years
      IP rating IP65
      Dimensions 127 x 44 x 90 mm / 5 x 1.7 x 3.5 inches (LxDxW)
      Weight 335g/11.8oz , O2 350g/12.3oz, CO2 335g/11.8oz
      SENSORS
      CO2 Sensor Unit O2 Sensor Unit
      Sensor type Analox infrared MIR Electrochemical
      Accuracy (at standard temperature and pressure) ±(1% of full scale + 2% of reading) ±1% of full scale (For best performance, calibrate the Sub Aspida while on battery power only.)
      Range 0.01 to 50.0 mbar ppCO2 (0.01 to 5% at 1000 mbara) 0.1 to 2000.0 mbar ppO2 (0.1 to 100% O2 at 1000 mbara)
      Response time T90 <60 seconds T90 <30 seconds
      Sensor life span 5 years 1 year (expected)
       
       
      Description
      The O2 Portable is an oxygen monitor designed to provide sample readings from cylinders containing different levels of O2. The O2 Portable is supplied with a sampling adaptor to be easily fitted to cylinders. O2 MONITORING WITH THE O2 PORTABLE

      Ensuring the oxygen content of a cylinder is correct is vital to ensure the safety of the end user. The O2 Portable provides a fast and accurate reading of O2 levels in that cylinder, easy to use as an instant spot check, the handheld unit is quick and simple to operate, with a robust design. The O2 Portable has a large digital display and operates from an internal temperature compensated 3 year life (expected) electrochemical oxygen sensor. Power is provided by a 9V, 4000-hour life battery giving up to 3 years of operation before replacement is necessary.  

      Technical Specification
      O2 PORTABLE
      Range 0.1% to 100% in O2
      Accuracy ±1% of reading over range 0 to 50% when calibrated on air in accordance with the manual ±2% of reading over range 0 to 100% when calibrated on certified pure oxygen in accordance with the manual
      Sensor Warranty 2 years (graded)
      Sensor Response <15 seconds to T90
      Power 9V Alkaline (PP3)
      Operating Temp 5°C to 50°C
      Dimensions 64mm x 98mm x 36mm (w x h x d)
      Weight 200g
      Click to download Data Sheet
      Click here to download User Manual
      Click here to download Quick Start Guide
      		CO2 MONITOR & ALARM DESIGNED FOR KIOSKS

      The Ax60+ Kiosk is a CO2 monitor and alarm specifically designed by Analox to alert personnel to a build up/leak of CO2 using a state-of-the-art infrared sensor. The alarm provides both audio and visual alerts in the case of increased levels of carbon dioxide (CO2). Up to four alarms can be added as needed and the unit does not need periodic calibration.

      CO2 monitoring with the AX60+ Kiosk
      The Ax60+ Kiosk is a smaller version of the popular Ax60+ carbon dioxide (CO2) monitor. It is simple to wall mount in the area where carbon dioxide (CO2) is stored or piped. The Ax60+ Kiosk sensor needs to be installed at a height of 12-18 inches (305-457mm) above the floor – this is because the carbon dioxide (CO2) that leaks from a gas cylinder is denser than ambient air and can collect at low levels. The alarm should be located above the sensor at about head height or at the entrance to the kiosk.  
      Technical Specification
      Sensor Unit
      Gas detected Carbon Dioxide (CO2)
      Sensor technology Infrared
      Range 0.1% to 5%
      Default alarm set-points USA regulations (NFPA 55, IFC, NBIC, OSHA and NIOSH): TWA - 5,000ppm (0.5%) AL1 - 5,000ppm (0.5%) AL2 - 15,000ppm (1.5%) AL3 - 30,000ppm (3%) International/European regulations (EH40) (DIN 6653-2:2015-06 compliant, assessed by TUV): TWA - 5,000ppm (0.5%) AL1 - 15,000ppm (1.5%) CO2 - 30,000ppm (3%)
      Warm up time 40 Seconds
      Resolution 0.01%
      Accuracy ±2.5% of the alarm levels
      Response Time 30 seconds to T90
      IP Rating IP55
      LED indicators Green = Power
      Alarm Unit
      Strobe White LED strobe, with an option to change to blue, red or amber filter.
      Sounder min 80 dBA @3 m (9.8 feet)
      IP Rating IP55
      LED indicators Green = Power, Amber = Fault
      Cable 2m included
      Performance characteristics
      • New 7.0-inch color touch screen

      The new 7-inch color 16:9 widescreen high-resolution full touch screen control system provides a new fingertip touch operation experience.

      • 4-channel water quality and 3-channel flow monitoring on the host

      Source water, secondary RO water, EDI deionized water, UP ultrapure w

      • The lab optimized standard two-stage reverse osmosis system

      The use of dual pumps, dual membranes and transition water tanks reduces system energy consumption and wastewater, ensuring stable water quality under different source water conditions.

      ater, 4-way water quality online monitoring and water quality exceeding standard alarm function.

      1-way source water flow statistics, EDI deionized water and UP ultrapure water 2-way high-precision quantitative water extraction function.

      • Standard-50L PE pure water tank

      The polyethylene pure water tank with conical bottom design contains an air filter, which can effectively absorb CO2, organic matter and filter bacteria and particles, and can be equipped with UV ultraviolet irradiation sterilization components.

      Features and Advantages
      • Built-in 3-pump system with primary and secondary RO booster pumps and circulation disinfection pumps to achieve complete two-stage reverse osmosis, system circulation and disinfection functions
      • Full-level filter element alarm prompt function based on time and flow, showing the used and remaining life of consumables
      • Automatic detection and alarm functions such as system water shortage alarm, water tank full alarm, water quality exceeding standard alarm, consumable life end alarm, water leakage protection alarm, etc. provide safety guarantee
      • Fully automatic RO membrane anti-scaling flushing program (flushing interval and duration can be set) to extend the service life of the RO membrane
      • Built-in SD card, can store and view operation data charts and curves, and can be inserted into a USB flash drive for complete data export, providing data traceability
      • With USB interface system program upgrade function, and optional WIFI module
      • Built-in perpetual calendar clock, convenient for consumables management and service settings
      • Ultrapure water full pipeline dosing disinfection function, just add disinfection tablets to start the one-key disinfection program to ensure high-quality pure water
      • Ultrapure water circulation function, which can be started and shut down freely to maintain low bacterial contamination level in the system
      • Factory and customer secondary passwords, system parameter settings are all password protected to prevent unauthorized changes
      • Compatible with 2 pure water storage methods of pressure water barrels to meet different application needs
      • High-strength all-engineering plastic chassis, ergonomic design, beautiful appearance, no corrosion and rust, ensure the cleanliness of the machine body, in line with GLP specifications
      • Unique 4-door design, pretreatment, RO and ultra-purification components, EDI and TOC modules, water tanks and control components adopt independent modular structures, making system maintenance more convenient
      • Pipes and joints are NSF certified to minimize TOC precipitation in the system and ensure the highest pure water quality
      • Powerful pre-treatment components, combined with 5μm PP transparent filter, KDF composite filter, coconut shell water-washing grade precision activated carbon filter, effectively protect the RO membrane
      • DOW RO reverse osmosis membrane, RO membrane components optimized by The lab, achieve the combination of long life, stability and high desalination rate of RO membrane
      • The new integrated ultra-purification component of DOW resin ensures that the water produced reaches 18.2MΩ.cm and reduces TOC precipitation
      • Ultra-long life 254&185nm dual wavelength UV lamp, combined with medical grade 316L flow hood, effectively sterilizes, reduces TOC, and enhances the system's application range
      • UF ultrafiltration components, molecular weight cut-off: MWCO5000D, effectively remove pyrogens/endotoxins, can be used for precision cell culture and IVF
      • Double-layer terminal sterilizing filter, accuracy: (0.45+0.1)μm, using PES polyethersulfone composite filter membrane, double-layer filtration design to ensure the terminal effluent is sterile
       
      Technical Parameters
      name Basic Heat removal prototype Low organic matter type Comprehensive Built-in TOC monitor
      model Super 10 Super 10F Super 10V Super 10FV Super-TOC10V Super-TOC 10FV
      Pure water output 10 L/hour
      Ultrapure water output Up to 2.0L/min (when there is water in the water tank)
      Ultrapure water index
      Resistivity (25℃) 18.2MΩ.cm
      Total Organic Carbon TOC* <10ppb <10ppb <3ppb <3ppb <3ppb <3ppb
      bacteria <0.01cfu/ml
      Particles (>0.1μm) <1/ml
      Pyrogens/endotoxins N/A <0.001Eu/ml N/A <0.001Eu/ml N/A <0.001Eu/ml
      RNases N/A <1pg/ml N/A <1pg/ml N/A <1pg/ml
      Deoxyribonucleases (DNases) N/A <5pg/ml N/A <5pg/ml N/A <5pg/ml
      Pure water index
      Resistivity* >5MΩ.cm
      Total Organic Carbon (TOC)* <30ppb
      Silicon Rejection Rate >99.9%
      Source water requirements Urban drinking tap water, water temperature 5-45℃, water pressure 1.0-4.0Kgf/cm2
      Size and weight Length × width × height: 545 × 470 × 649 mm, weight: about 35 kg
      Electrical requirements 220-240V, 50/60Hz
      power 240W
      System Configuration Host (including 1 set of purification column) + TOC monitor (TOC type) + 50L PE ultrapure water storage tank
         
      Key Features
      • Uses a GFC infra-red sensing technique ensuring the system is not sensitive to hydrogen or water vapor
      • Built-in auto-zero function ensures sensor stability
      • Real-time monitoring ensures rapid response to carbon monoxide (CO) issues as they occur
      • 90 days data-logging allows records to be stored and used should they ever be needed
      • Easy to maintain allowing you to be more self-sufficient whilst minimizing downtime
      • Designed specifically for the submarine environment so it is able to cope with the demands of the environment in terms of EMC, shock and temperature
       
      Technical Specifications
      Mechanical
      Nominal cabinet dimensions (exc mounting lugs) 479 x 280 x 176 mm (h x w x d)
      Nominal cabinet dimensions (inc mounting lugs) 479 x 360 x 200 mm (h x w x d)
      Cabinet weight 11.6 kg
      Cabinet material aluminium
      Electrical
      Electrical supply 115 V AC 60 Hz
      Max power consumption 90W
      Fuse rating (F1, F2): 20 mm, 2.5A anti-surge
      Signal output 4-20 mA
      EMC compliance MIL-STD-461F
      ESD compliance EN 61000-4-2
      Operating temperature range 0 to +45°C
      Storage temperature 40 to +70°C
      Operating pressure range 800 to 1400 hPa
      Extended pressure range 600 to 800 hPa (Degraded performance over this pressure range)
      Storage/transport pressure range 300 to 1400 hPa
      Operating humidity range 0 to 80 %RH
      Extended humidity range (up to 1 hour) 80 to 100 %RH
      Storage humidity range 0 to 80 %RH (temporary max. 100 %RH)
      Max. roll angle 15° (constant), 45° (temporary)
      Max. pitch angle 10° (constant), 30° (temporary)
      Shock Tested at 22g, 20ms (half sine) without shock isolation
      Vibration NATO STANAG 4138
      CO measuring range 0 to 200 ppm
      Repeatability, measured at RTP ± (1 ppm CO + 1 display count)
      Accuracy across normal operating environmental envelope ±5% full scale (equivalent to ± 10 ppm)
      Zero drift ±1 ppm CO/day
      Cross-sensitivity to hydrogen 2% vol H2 < 1 ppm CO
      Cross-sensitivity to CO2 5% vol CO2 < 1 ppm CO
      Response time T90 <60s

      Click here to download Data Sheet
      Click here to download Manual
      		DETAILS SonoScape’s trolley colour Doppler system S11 redefines price and performance with practical design. The S11 will go beyond your expectations but not your budget. As an easy-to-use ultrasound system, the S11 is integrated with a new software platform, especially optimized for a smooth workflow and convenient operation. The system speeds up the exam process and makes file management easier. SPECIFICATION - 15-inch high definition LCD monitor with articulating arm - Compact and agile trolley design - 3 active transducer sockets available for a wide range of applications - Duplex, Color Doppler, DPI, PW Doppler, tissue harmonic imaging, μ-scan speckle reduction imaging, compound imaging, trapezoidal imaging - Customized settings based on your own working style - Full patient database and image management solutions  
      Click Here To Download Catalogue 
      WeightN/AN/AN/AN/AN/AN/A
      DimensionsN/AN/AN/AN/AN/AN/A
      Additional information

      Related products

      portable ultrasound machine
      Add to cart
      Add to wishlist
      Cardiology

      Sonoscape E2 Ultrasound Machine

      $5,500.00
      S22
      Add to cart
      Add to wishlist
      Cardiology

      Sonoscape S22 Ultrasound Machine

      $9,350.00
      P15
      Add to cart
      Add to wishlist
      Cardiology

      Sonoscape P15 Ultrasound Machine With Four Probes

      $13,900.00
      Ultra-Pure-Water-Purification-System-for-Science-Applications
      Read more
      Add to wishlist
      Health Education

      Super-Full Touch Screen Water Purification System

      $0.00
      Sonoscape-E1Vet-131714822616824376
      E1-Exp-570x570
      Add to cart
      Add to wishlist
      Cardiology

      Sonoscape E1 Ultrasound Machine With Two Probes

      $4,620.00
      submk3pnew-787x787
      Read more
      Add to wishlist
      Chemistry-Experiments

      DISSUB ANALYSER

      $0.00
      DrGem Topaz 400mA Digital X-ray Machine
      TOPAZ Mobile DR System 2
      Read more
      Add to wishlist
      Medical Equipment

      Topaz Digital X-ray Machine

      $0.00
      S8 Portable Ultrasound Scanner
      Add to cart
      Add to wishlist
      Cardiology

      Sonoscape S8 Exp Portable Ultrasound

      $9,350.00
      images (2)
      Read more
      Add to wishlist
      Health Education

      Full Touch Screen Water Purification System

      $0.00
      Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
      • Image
      • Rating
      • Price
      • Description
      Click outside to hide the comparison bar
      Compare