Individually adjustable lower limit of vacuum power in pulsation mode for optimal adhesion of the electrodes in every therapy situation
Self-regulating vacuum pump for constant negative pressure
Vibration and noise optimized
Automatic shutdown by protective switch in the water separator (with acoustic-optical warning signal)
General Features
Maximum rapid entry into therapy
Logical color coding of the stimulation current and vacuum application accessories for quick and safe assignment of the channels and the respective polarity
Therapy information
Vacuum application devices allow you to apply stimulation currents using vacuum electrodes. These are sucked onto the patient’s tissue using a gentle negative pressure and ensure quick and safe application without bands, plates or disposable electrodes. The effect and the associated increase in blood flow result in improved transmission properties for the current. Pulsating suction waves can be used to further invigorate the therapy.
Thanks to their soft contour, high-quality vacuum electrodes adapt perfectly to the corresponding body contours.
With special suction cups, vacuum application devices are also suitable for carrying out manual suction wave massage.
Reviews
There are no reviews yet.
Be the first to review “PHYSIOVAC Expert” Cancel reply
Shipped From Abroad
With special suction cups (Luran suction cups), vacuum application devices are also suitable for carrying out manual suction wave massage.
Delivery & Availability:Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad
Therapy tilt tables and standing boards for the optimal treatment of diseases and injuries
Therapeutic tilt tables, also known as standing boards, can be used for various therapy methods. Among other things, they enable the patient to be raised up continuously from the shock or lying position to the almost vertical position. These models are therefore ideal for the treatment of neurological diseases as well as head and back injuries or paraplegic patients.
In order to give the patient the physical and psychological safety required during treatment and when getting on and off, the combination of the upholstery cutout at the foot end with the extra-large, removable footboard was developed for the tilting tables.
The therapy tilt tables are available in two widths:
Width 800 mm, Article No.: KT-1080/EE,
Width 1,000 mm, Article No.: KT-10100/EE.
Delivery & Availability:Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad
The Total Support Max Insole is ideal for serious athletes needing rigid arch support for stability. It features the technology that aids in the relief of symptoms caused by Plantar Fasciitis and helps reduce issues that cause foot, leg, and back pain.
Delivery & Availability:Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad
The Spenco RX Plantar Fascia is built with a sturdy nylon arch support that comfortably stretches the plantar fascia for everyday comfort. The engineered arch bridge supports plantar fascia so that the arch does not collapse allowing the user to stand and move in a neutral position.
Delivery & Availability:Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad
Therapy tables with multiple, continuous adjustment options
The AGA-THERA therapy tables were designed for the practices of chiropractors, orthopedists and therapists. Thanks to the many infinitely variable adjustment options for the height, the armrests, the legrests, the back section, the head section with facial cutout and the seat section, various lounger positions such as Trendelenburg/Anti-Trendelenburg and the drainage position can be adjusted.
In order to make the regularly recurring and everyday measures and treatments easier for patients and users, the therapy tables from AGA Sanitätsartikel are all equipped with a height adjustment mechanism as follows:
Manual (hand crank), Article No.: TH-1065/H,
Hydraulics, Article No.: TH-1065/Y,
Electric motor, Article No.: TH-1065/E.
Delivery & Availability:Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad
Supercharge the cushion in your everyday trainer with Spenco Propel insoles featuring INergy Foam technology. Experience a lighter, more durable insole that provides superior energy return versus the standard insole.
Delivery & Availability:Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Content
Vacuum application
Adjustment of vacuum and pulsation in 10 steps
Individually adjustable lower limit of vacuum power in pulsation mode for optimal adhesion of the electrodes in every therapy situation
Self-regulating vacuum pump for constant negative pressure
Vibration and noise optimized
Automatic shutdown by protective switch in the water separator (with acoustic-optical warning signal)
General Features
Maximum rapid entry into therapy
Logical color coding of the stimulation current and vacuum application accessories for quick and safe assignment of the channels and the respective polarity
Therapy information
Vacuum application devices allow you to apply stimulation currents using vacuum electrodes. These are sucked onto the patient's tissue using a gentle negative pressure and ensure quick and safe application without bands, plates or disposable electrodes. The effect and the associated increase in blood flow result in improved transmission properties for the current. Pulsating suction waves can be used to further invigorate the therapy.Thanks to their soft contour, high-quality vacuum electrodes adapt perfectly to the corresponding body contours.With special suction cups, vacuum application devices are also suitable for carrying out manual suction wave massage.
Features
The therapy tilt tables can be adjusted by electric motors from the vertical position (90°) to the horizontal position (0°). The tilting is controlled using a hand switch (alternatively, at no extra charge, with a foot switch).
The electromotive height adjustment (520 – 960 mm, measured in the horizontal upholstery position) is controlled via a foot switch (alternatively, at no extra charge, via a hand switch).
The height and tilt adjustments are done with maintenance-free and splash-proof and extremely quiet electric drives equipped with key locks. Connection values per motor: 230V, 50/60 Hz., 3.7A, 850W, IPX4, v=11mm/s, 10,000N.
The wide support frame, which is equipped with a mobile base on retractable castors, ensures a high level of stability, even under stress.
The mobile base on retractable castors, swivel castors Ø 75 mm, locked in place using pedals are by pedals at the head and foot ends (step twice).
The thickness of the two upholstered segments (headrest and main surface) on the tilt tables are:
Article No.: KT-1080/EE, each 64 mm,
Article No.: KT-10100/EE, each 67 mm.
The headrest can adjusted up to +35° using a grid with 13 locking steps.
Technical data
Therapy tilt tables
Article number
KT-1080/EE
KT-10100/EE
Frame
Lacquered
LengthHeadrest/main section
1,900 mm
500 / 1,400 mm
Width
800 mm
(860 mm with standard rails)
1,000 mm
(1,060 mm with standard rails)
Height adjustment
520 - 960 mm (electric motor)
Tilt adjustment
0º / +90º (electric motor)
Upholstery segments
2 sections
Upholstery thickness
64 mm
67 mm
Headrest adjustment
+35°(grid)
Load capacity
130 kg
The standard configuration includes:
A pair of side-mounted surgical rails, dimensions 25 x 10 mm, made of CrNi steel, length 1,560 mm.
A removable footboard, dimensions 800 / 1,000 x 320 mm (W x D), frame plastic-coated, tread covered with synthetic leather.
The hand and foot switches.
A cutout at the foot of the main section to make getting on and off easier.
Substructure as a mobile base on retractable castors, swivel castors Ø 75 mm.
Floor protectors (clip-on caps) on the four adjustable feet.
An integrated protractor.
Accessories & additional options
Article No.
Description
A-2047
Arm support, swivel-mounted, black PU-foam arm shell, dimensions approx. 400 x 120 mm (L x W), with 2 Velcro fasteners to secure the arm to the shell, chrome-plated holder with attachment for standard rail.
P-2080/A
P-20100/A
Paper roll holder, for table width 800 mm.
Paper roll holder, for table width 1,000 mm.
With mounting hardware, chrome-plated, consisting of two mounting kits (square steel tube 30 x 30 x 2 mm, length approx. 150 mm), two brackets, two clamps and a paper roll holder rod (length 795 / 995 mm, Ø 20 x 1 mm), for mounting on the upholstery frame.
PG-260
Patient belt, dimensions 2,600 x 250 mm (L x W), sewn from synthetic leather, with Velcro closure (hook and loops straps)
Features
All the features of our Total Support Original but with a stiffer, more rigid arch support and SpenCore Forefoot Pad. Perfect for serious athletes needing stiffer, more rigid support. Most rigid replacement insoles offer some motion control and stability but that’s where the similarity ends: Spenco Total Support Insoles feature our patented 3-PODModulation System: By positioning pods with varying degrees of hardness beneath key areas of the foot, Total Support Insoles change the ground forces reaching the foot during activity. This tunes the ride for performance and comfort while helping to reduce over-pronation, a common problem that causes foot, leg and back pain. SpencoTotal Support Insoles are unconditionally guaranteed for one year. Total Support Technology aids in the relief of symptoms caused by Plantar Fasciitis.
3-POD System promotes healthy biomechanics, absorbs shock and provides cushioning through multi-density impact zones: - Stiffer Red POD counters over-pronation - Softer Blue PODS help guide the stride
Rigid Stability Cradle provides advanced arch support, deep heel cupping and comfort through the stride
Custom EVA Layer conforms with normal wear to match the contours of the foot
Low-Friction Antimicrobial Top Cloth helps prevent blisters and control odor
Metatarsal Arch Support offloads pressure from the ball-of-foot.
SpenCore Forefoot Crash Pad provides superior cushioning and energy return to the ball-of-foot
First Ray Drop Zone allows for more efficient, natural toe-off promoting a healthy stride
Forefoot Perforations increase flexibility and airflow for lasting comfort
The Spenco RX Plantar Fascia is your prescription to move about the day. Built with a sturdy nylon arch support that comfortably stretches the plantar fascia for every day comfort. The engineered arch bridge supports plantar fascia so that the arch does not collapse allowing the user to stand and move in a neutral position. Seizing the day never felt so good.
Engineered plantar bridge provides study arch support
Gel heel absorbs impact
Deep heel cup provided stability
PU, GEL, NYLON
Odor resistant
Love Your Feet, fun colors hidden inside your shoe
In order to avoid rocking and swinging movements of the lying surfaces, the therapy tables are manufactured with precision double square profiles.
The manual height adjustment is done with a hand crank using maintenance-free gear with an optimal transmission ratio (i = 10mm/rev) for smooth, quick and easy operation, without much effort, even with heavier patients (up to 150 kg). After use, the crank handle can be pushed back under the tabletop.
The hydraulic height adjustment is operated via the centrally built-in foot pump. The height adjustment of the therapy table can of course also be done with heavier patients (up to 150 kg) without any major effort. In order to be able to operate the hydraulics from both sides, it is possible to install an additional foot lever. This is available for an additional charge (Article No.: FPH-10).
The electric motor height adjustment is controlled via a hand switch (alternatively - at no extra charge - via a foot switch) and can of course also be carried out with heavy patients (up to 150 kg). The electric drive used is maintenance-free and extremely quiet. The adjustment system is equipped with a key lock. Motor connection values: 230V, 50/60 Hz., 3.7A, 850W, IPX4, v=11mm/s, 10,000N.
The wide extension of the substructure, which is equipped with a mobile base on retractable castors ensures a high level of stability, even under stress load.
With the retractable castors system, the universal therapy table is lifted onto castors (Ø 75 mm) using foot control or lowered onto feet for standing.
The thickness of the seven upholstery segments (armrests, head, back, seat and leg sections) is 64 mm each.
Technical data
Therapy tables AGA-THERA
Article number
TH-1065/H
TH-1065/Y
TH-1065/E
Frame
Lacquered
Length
Head/back/seat/foot sections
1,920 mm
430 / 515 / 455 / 505 mm
Width
620 mm
Height adjustment
650 - 850 mm
(hand crank)
650 - 850 mm
(hydraulics)
650 - 850 mm
(electric motor)
Upholstery segments
7 sections
Upholstrey thickness
64 mm
Head section adjustment
+20° (grid)
Armrests
-140 mm (clamping)
Seat/backrest adjustments
+/-20° (gas pressure spring)
Leg section adjustments
+/-30° (clamping rods)
Trendelenburg adjustment
20° (gas pressure spring)
Anti-Trendelenburg adjustment
20° (gas pressure spring)
Load capacity
150 kg
The standard configuration includes:
Mobile base on retractable castors, swivel castors Ø 75 mm.
Floor protectors (clip-on caps) on the four adjustable feet.
Accessories & additional options
Article No.
Description
FPH-10
Foot pedal, with transmission shaft and connecting piece. This allows the hydraulic height adjustment to be operated from both sides.
HRM-14
Semi-circular roll, foam filling, dimensions Ø 200 x 400 mm, sewn from synthetic leather, with zipper, see upholstery colours.
KKM-16
Head wedge, foam filling, dimensions 450 x 400 x 80 / 10 mm (L x W x H), sewn from synthetic leather, with zipper, see upholstery colours.
RLM-20
RM-12
Knee roll, dimensions Ø 180 x 560 mm.
Neck roll, dimensions Ø 140 x 400 mm.
Round roll, foam filling, sewn from synthetic leather, with zipper.
Features
Supercharge the cushion in your everyday trainer with Spenco Propel insoles featuring INergy Foam technology. Experience a lighter, more durable insole that provides superior energy return versus the standard insole.
12X Greater Energy Return vs. the stock insole from a leading shoe brand, giving you a feeling of extra bounce in each step
2X More Durable INergy Foam for mile after mile cushioning in any shoe (vs. EVA Foam)
20% Lighter for a lightweight supportive feel while gliding down the road (INergy foam vs. TPU foam)
Reviews
There are no reviews yet.