VENUS-SOLO_01_0-787x787

Health Education

VENUS SOLO OEM SENSOR

Brands: Analox

~~$0.00~~

Shipped From Abroad

Key Features

Single gas (user defined)
Backward compatible with ADC’s ‘Eclipse’
Linearised Output
Continuous status signal to check device health

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Sku:

SF1033560130141-15

Brands:: Analox

Description
Reviews (0)

Description

Description

The Venus Solo OEM sensor is a self-contained unit designed for integration into other manufacturers’ equipment and provides a measurement of gas concentration according to specific user requirements. These GFC (Gas Filter Correlation) sensors generate a signal proportional to the infrared absorption of the measured gas.

Providing the gas concentration lies within the designed range of the sensor, the signal is periodically compared with a reference gas. Gas concentrations are indicated through the non-linearised analogue signal output. Gas connections to and from the sensor are via suitable fittings on the gas measuring cell.

The Venus Solo OEM Series sensors electrical supply is designed to accept 24V DC (3amp max).

Our Venus Solo OEM sensor uses GFC (Gas Filter Correlation) technology to give highly accurate gas measurements.

The Venus Solo can be integrated into your own gas analyzer or management system and offers the user a 0-2.5v analogue output.

The sensor is currently available as either: Carbon dioxide (CO2), carbon monoxide (CO), nitrous oxide (N20), methane (CH4) or nitric oxide (NO). If your application requires a different gas, just let us know and we can customise it to your needs.

The Venus Solo is used in Military applications to protect submariners from carbon monoxide (CO) exposure.

Technical Specification

Venus Solo

Operating Temperature Range	5°C to 40°C
Ambient Humidity	0 to 95% RH, non condensing
System Warm-up Time	30-60 minutes (dependant on gas)
Power Requirements	24V DC +/- 10%, Max current 3A, Nominal current 600mA (after warm up)
Outputs	4-20mA, RS232, relays
Response Time (T90)	Between 10-90 secs (dependant upon gas cell length) at flow rate of 500ml/minute
Intrinsic Accuracy	+/- 0.2% of full scale
Sensor Technology	Gas Filter Correlation

Gas PPM Ranges

Gas Type	10 PPM	20 PPM	50 PPM	100 PPM	200 PPM	500 PPM	1000 PPM	2000 PPM	5000 PPM
Carbon Dioxide (CO2)	✓		✓	✓		✓	✓		✓
Carbon Monoxide (CO)		✓		✓	✓	✓	✓		✓
Methane (CH4)				✓	✓	✓	✓		✓
Nitrous Oxide (N20)	✓		✓	✓	✓	✓	✓		✓

Gas % Ranges

Gas Type	1%	5%	10%	20%	50%	100%
Carbon Dioxide (CO2)	✓	✓	✓		✓	✓
Carbon Monoxide (CO)	✓	✓	✓		✓	✓
Methane (CH4)	✓	✓	✓	✓	✓	✓
Nitrous Oxide (N20)	✓	✓	✓	✓	✓	✓

Click here to download Data Sheet

Click here to download Operational Manual

Reviews

There are no reviews yet.

Be the first to review “VENUS SOLO OEM SENSOR”

Quick Comparison

Settings VENUS SOLO OEM SENSOR remove OXYGEN & CARBON DIOXIDE MONITOR remove Full Touch Screen Water Purification System remove CARBON MONOXIDE ATMOSPHERE MONITORING SYSTEM remove PERSONAL CO2/O2 MONITOR-SUB-ASPIDA remove COMPRESSED BREATHING AIR MONITOR remove

Name VENUS SOLO OEM SENSOR remove OXYGEN & CARBON DIOXIDE MONITOR remove Full Touch Screen Water Purification System remove CARBON MONOXIDE ATMOSPHERE MONITORING SYSTEM remove PERSONAL CO2/O2 MONITOR-SUB-ASPIDA remove COMPRESSED BREATHING AIR MONITOR remove

Image

SKU SF1033560130141-15 SF1033560130141-12 SF1033560130126-4 SF1033560130141-2 SF1033560130141-13 SF1033560130141-3

Rating

Price

~~$0.00~~

~~$0.00~~

~~$0.00~~

~~$0.00~~

~~$0.00~~

~~$0.00~~

Stock

Availability

Add to cart

Description

Shipped From Abroad

Key Features

Single gas (user defined)
Backward compatible with ADC’s ‘Eclipse’
Linearised Output
Continuous status signal to check device health

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad

Key Features

Operating temperature 0 °C to 40 °C (32 °F to 104 °F)
Dual state-of-the-art oxygen and carbon dioxide sensors
Two analogue outputs, one for each gas detected
Maximum power consumption less than 5 watts
Designed to operate safely in a vacuum for four hours

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad The Center series uses city tap water as the water source, conveniently and quickly produces secondary RO reverse osmosis water, DI/EDI deionized water and UP ultrapure water. It adopts standard two-stage reverse osmosis system and EDI technology and modules*, and continuously produces Class II pure water with a TOC of more than 10MΩ.cm (25℃) and less than 30ppb*, and ultrapure water of 18.2MΩ.cm (25℃).There are currently four sub-product series of Center (Center-EDI) pure water and ultrapure water, and the system water output is: 45, 60, and 90 liters/hour.

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad

The COSAMS unit was designed specifically for use on submarines, most directly those that operate on diesel engines. Built to exacting military standards for performance, reliability and endurance, the Analox COSAMS uses proprietary Gas Filter Correlation (GFC) technology to specifically analyze the unique properties of CO.

The COSAMS (Carbon Monoxide Submarine Atmosphere Monitoring System) has been designed for use on submerged submarines to support life, where crew can be living and working for up to 90 days. Carbon monoxide can be generated on a submarine in several ways, from cooking and fire, to the incomplete combustion of diesel fuel and chlorate candles.

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad

Key features

It is the only portable monitor to be pressure corrected ensuring no false readings are given
The Sub Aspida is compact in size (127 x 44 x 90mm LxDxW)
The oxygen (O2) sensor can be calibrated on air, reducing costly gas requirements and making you self sufficient in the maintenance of the sensor
The carbon dioxide (CO2) sensor only needs calibrating every 12 months
OLED (Organic Light Emitting Diode) display
Pressure compensated CO2 & O2 sensors
Rechargeable battery-operated (NiMH)
Datalogging
Man-down alarm
Can offer continuous monitoring or spot checking
Audio, visual and vibration alarms
TWA (Time Weighted Average) Alarm
User maintainable
Can be worn on the belt or clipped to a panel
Pressure range of 700-1200mbara
Maintenance reminders as standard

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad

Key Features

Provides continuous monitoring 24/7
Low maintenance and is easy to install and maintain
Provides 90 days of datalogging which you can easily retrieve via a USB connection
Cost effective alternative to colorimetric tube testing
Supplied as either a fixed or portable version depending upon your needs
Can be used on any breathing air compressor
Digital display

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Content

Description

The Venus Solo OEM sensor is a self-contained unit designed for integration into other manufacturers’ equipment and provides a measurement of gas concentration according to specific user requirements. These GFC (Gas Filter Correlation) sensors generate a signal proportional to the infrared absorption of the measured gas. Providing the gas concentration lies within the designed range of the sensor, the signal is periodically compared with a reference gas. Gas concentrations are indicated through the non-linearised analogue signal output. Gas connections to and from the sensor are via suitable fittings on the gas measuring cell. The Venus Solo OEM Series sensors electrical supply is designed to accept 24V DC (3amp max). Our Venus Solo OEM sensor uses GFC (Gas Filter Correlation) technology to give highly accurate gas measurements. The Venus Solo can be integrated into your own gas analyzer or management system and offers the user a 0-2.5v analogue output.

The sensor is currently available as either: Carbon dioxide (CO2), carbon monoxide (CO), nitrous oxide (N20), methane (CH4) or nitric oxide (NO). If your application requires a different gas, just let us know and we can customise it to your needs. The Venus Solo is used in Military applications to protect submariners from carbon monoxide (CO) exposure.

Technical Specification

Venus Solo

Operating Temperature Range	5°C to 40°C
Ambient Humidity	0 to 95% RH, non condensing
System Warm-up Time	30-60 minutes (dependant on gas)
Power Requirements	24V DC +/- 10%, Max current 3A, Nominal current 600mA (after warm up)
Outputs	4-20mA, RS232, relays
Response Time (T90)	Between 10-90 secs (dependant upon gas cell length) at flow rate of 500ml/minute
Intrinsic Accuracy	+/- 0.2% of full scale
Sensor Technology	Gas Filter Correlation

Gas PPM Ranges

Gas Type	10 PPM	20 PPM	50 PPM	100 PPM	200 PPM	500 PPM	1000 PPM	2000 PPM	5000 PPM
Carbon Dioxide (CO2)	✓		✓	✓		✓	✓		✓
Carbon Monoxide (CO)		✓		✓	✓	✓	✓		✓
Methane (CH4)				✓	✓	✓	✓		✓
Nitrous Oxide (N20)	✓		✓	✓	✓	✓	✓		✓

Gas % Ranges

Gas Type	1%	5%	10%	20%	50%	100%
Carbon Dioxide (CO2)	✓	✓	✓		✓	✓
Carbon Monoxide (CO)	✓	✓	✓		✓	✓
Methane (CH4)	✓	✓	✓	✓	✓	✓
Nitrous Oxide (N20)	✓	✓	✓	✓	✓	✓

Click here to download Data Sheet

Click here to download Operational Manual

Description

The SV-Multigas-2 is a dual oxygen (O2) and carbon dioxide (CO2) monitor designed for vehicles operating in the upper atmosphere. Housed in a robust, compact enclosure, the unit is ideal for use in airborne delivery systems, satellites and aircraft cabins. Since 2014 the SV-Multigas-2 has been successfully used in rockets travelling to outer space. Flexibility The SV-Multigas-2 incorporates user maintainable analogue sensors that provide a 1 to 5 V output. This modular approach to gas monitoring ensures that our customers have the flexibility to integrate the unit into their own system. It can be either installed directly in the gas path or used for general air monitoring.

Technical Specification

SV-Multigas-2

Operating temperature range	32 to 104 °F / 0 to 40 °C
Storage temperature range	−4 to 140 °F / −20 to 60 °C
Operating pressure range	8.7 to 17.4 psia / 600 mbar to 1200 mbara
Vacuum tolerance	normal operation of the SV-Multigas-2 will not be affected by 4 hour exposure to vacuum
Electrical supply	18 to 36 V DC, 100 mV ripple maximum
Power consumption	5 W maximum
2 analogue outputs are provided, one for each gas	Zero output: 1.0 V, full-scale output: 5.0 V, warm-up/fault output: 0.25 V Outputs are isolated from the incoming power supply and from each other

O2 SENSOR

Range	0 to 5.80 psi pO2 / 0 to 400 mbar
Repeatability @ 14.5 psia, 70 °F / 1000 mbara, 21 °C	± 0.116 psi pO2 / ± 8 mbar

CO2 SENSOR

Range	0 to 0.14 psi pCO2 / 0 to 10 mbar
Repeatability @ 14.5 psia, 70 °F / 1000 mbara, 21 °C	±(0.0014 psi pCO2 + 1.1% of reading) / ±(0.1 mbar + 1.1% of reading)

Click here to download Data Sheet

Performance characteristics

New 7.0-inch color touch screen

Animated menu, system information at a glance, and a new fingertip touch operation experience.

The lab optimized standard two-stage reverse osmosis system

The use of dual pumps, dual membranes and transition water tanks reduces system energy consumption, reduces wastewater and produces more stable water quality.

Advanced EDI technology and modules

Providing you with consistent 10MΩ.cm grade high purity water at an optimized operating cost.

Removable water tray

Prevent water droplets from splashing, store water in time, facilitate cleaning, and keep the system clean.

Built-in double water tank

Built-in 20L PE water tank and 1 20L pressure water bucket, saving more experimental space and eliminating the inconvenience of external water bucket.

Features and Advantages

The ultrapure water circulation system can be started and shut down freely to maintain the low bacterial contamination level of the system
Ultrapure water full pipeline disinfection program, can manually execute "circulation disinfection", "water inlet disinfection", "water tank filling", "manual sewage discharge", "stop disinfection"
Fully automatic RO membrane anti-scaling flushing (flushing interval and duration can be set) and manual forced flushing program to extend the service life of the RO membrane
The life of PP, KDF, AC, RO, UP, UF, TF, and UV consumables can be set, and the used time can be displayed, and automatic replacement reminders will be given when the time expires.
Water shortage and water full alarm, source water, RO reverse osmosis water, DI deionized water/UP ultrapure water exceeding the standard alarm
Compatible with two pure water storage methods: pressure water bucket and liquid level water tank, which can directly display the water storage capacity of the water tank to meet different application needs
System time setting (year/month/day/hour/minute), timed standby (0~60min), timed shutdown (0~24hour) functions
Record and check the replacement time of consumables at any time to fully grasp the equipment maintenance information
Complete information query and data management functions, fully control system operation status, water quality, consumables usage, timely alarm, historical alarm and other information
The entire pipeline adopts quick plug-in interface, and all pipes and joints are NSF certified
DOW RO reverse osmosis membrane ensures stable operation and high desalination rate
DOW's high-purity nuclear-grade resin ensures that the water produced reaches 18.2MΩ.cm and reduces TOC precipitation
Ultra-long life 254 & 185nm dual wavelength UV lamp, effective sterilization, reducing TOC
MWCO 5000D UF ultrafiltration module, effectively removes endotoxins/pyrogens
0.2μm PES polyethersulfone composite membrane terminal filter to ensure pure water quality

Key Features

Uses a GFC infra-red sensing technique ensuring the system is not sensitive to hydrogen or water vapor
Built-in auto-zero function ensures sensor stability
Real-time monitoring ensures rapid response to carbon monoxide (CO) issues as they occur
90 days data-logging allows records to be stored and used should they ever be needed
Easy to maintain allowing you to be more self-sufficient whilst minimizing downtime
Designed specifically for the submarine environment so it is able to cope with the demands of the environment in terms of EMC, shock and temperature

Technical Specifications

*Mechanical*
Nominal cabinet dimensions (exc mounting lugs)	479 x 280 x 176 mm (h x w x d)
Nominal cabinet dimensions (inc mounting lugs)	479 x 360 x 200 mm (h x w x d)
Cabinet weight	11.6 kg
Cabinet material	aluminium

*Electrical*
Electrical supply	115 V AC 60 Hz
Max power consumption	90W
Fuse rating	(F1, F2): 20 mm, 2.5A anti-surge
Signal output	4-20 mA
EMC compliance	MIL-STD-461F
ESD compliance	EN 61000-4-2

Operating temperature range	0 to +45°C
Storage temperature	40 to +70°C
Operating pressure range	800 to 1400 hPa
Extended pressure range	600 to 800 hPa (Degraded performance over this pressure range)
Storage/transport pressure range	300 to 1400 hPa
Operating humidity range	0 to 80 %RH
Extended humidity range (up to 1 hour)	80 to 100 %RH
Storage humidity range	0 to 80 %RH (temporary max. 100 %RH)
Max. roll angle	15° (constant), 45° (temporary)
Max. pitch angle	10° (constant), 30° (temporary)
Shock	Tested at 22g, 20ms (half sine) without shock isolation
Vibration	NATO STANAG 4138

CO measuring range	0 to 200 ppm
Repeatability, measured at RTP	± (1 ppm CO + 1 display count)
Accuracy across normal operating environmental envelope	±5% full scale (equivalent to ± 10 ppm)
Zero drift	±1 ppm CO/day
Cross-sensitivity to hydrogen	2% vol H2 < 1 ppm CO
Cross-sensitivity to CO2	5% vol CO2 < 1 ppm CO
Response time	T90 <60s

Click here to download Data Sheet

Click here to download Manual

Description

The Sub Aspida is a personal, portable monitor which is used to detect levels of carbon dioxide (CO2) and oxygen (O2) in pressurized environments.

CO2 monitoring & O2 monitoring with the Sub Aspida

Unlike industrial sensing monitors, the Sub Aspida was designed with pressure corrected sensors, giving you 100% confidence in your readings. The Sub Aspida has been upgraded to support those who work at high altitude. Pressure tested to 10,000 ft or 700 MB, the Sub Aspida will remain accurate and reliable when monitoring CO2 and O2 in the atmosphere, meaning you can concentrate on the job at hand!

Technical Specification

SUB-ASPIDA

Operating temperature	0°C to +50°C
Operating pressure	700 to 1200 mbara
Humidity Range	0 to 99% RH
Display	High-visibility, Organic Light Emitting Diode (OLED) display
Alarm horn	95dB @ 30cm
LED indicators	1 x Green - OK, 1 x Amber - Fault, 1 x Red - Alarm
Internal data log	1 log every 30 seconds for at least 7 days of continuous use
Batteries	2 x NiMH 2100mAh AA batteries (or suitable AA type batteries)
Battery discharge time	12 hours under normal operation (Passive atmospheric monitoring, minimal user interaction, no alarms)
Battery lifespan	2 years
Battery charge time	4.5 hours (from flat)
Charge power supply rating	9 V DC - 0.55A, DC jack 5.5x12.0x2.1mm centre +ve
Electronics warranty	2 years
IP rating	IP65
Dimensions	127 x 44 x 90 mm / 5 x 1.7 x 3.5 inches (LxDxW)
Weight	335g/11.8oz , O2 350g/12.3oz, CO2 335g/11.8oz

SENSORS

CO2 Sensor Unit	O2 Sensor Unit
Sensor type	Analox infrared MIR	Electrochemical
Accuracy (at standard temperature and pressure)	±(1% of full scale + 2% of reading)	±1% of full scale (For best performance, calibrate the Sub Aspida while on battery power only.)
Range	0.01 to 50.0 mbar ppCO2 (0.01 to 5% at 1000 mbara)	0.1 to 2000.0 mbar ppO2 (0.1 to 100% O2 at 1000 mbara)
Response time	T90 <60 seconds	T90 <30 seconds
Sensor life span	5 years	1 year (expected)

A Reliable Tool

The ACG+ offers continuous monitoring of up to five different gas variables (oxygen, carbon monoxide, carbon dioxide, volatile organic compounds and water vapor) and simultaneously displays results for testing and calibration purposes. This eliminates potential delays and downtimes while test results are sent out for analysis. The ACG+ has also made cumbersome colorimetric tubes obsolete by drastically reducing the potential for human error in gas analysis. The continuous monitoring also has virtually eliminated the need for time-consuming spot checks. The ACG+ simultaneously scans for O2, CO2, CO, VOCs and water vapor, making it one of the most versatile tools any vessel can utilize. The automatic data log provides additional peace of mind for decision makers.

A Cost Effective Solution

You can’t put a price on safety, reliability and peace of mind. The Analox development team created the ACG+ to combine multiple tasks simultaneously, reducing the need for multiple analyzer units, costly test tubes, and often, extended times in port for repairs. The ACG+ is available in either a fixed location model or convenient portable units. This adaptability provides designers, procurement officers and equipment specialists some options in closed quarter situations.

A Tool, Easy To Install And Maintain

While each ACG+ unit can monitor up to five gasses simultaneously, each analytical system operating in the ACG+ is independent of the others. This means sensors can be replaced individually without needlessly causing downtime.

An Easy Choice

The Analox ACG+ has been proven effective in military situations around the world. The unit’s continuous and specific monitoring capabilities make it an easy choice for key decision-makers.

Technical Specifications

ACG+

Power	24V DC
Optional battery power	NiMH or Li-ION
Optional mains adaptor	Universal input 95 to 250 V AC, 50/60 Hz
IP Rating	IP45
Response Time	T90 <120 seconds T90 <15 minutes H2O sensor
Temperature	Operating: −5 °C to 50 °C / 23°F to 122°F Storage: −10 °C to 60°C / 14°F to 140°F
Flow rate	0.5L per minute (max)
Inlet Pressure	5-10 Bar Gauge (Optional regulator can be purchased)
Humidity	0-99% RH (Non Condensing)
Outputs	1 x normally open relay contacts 1 x normally closed relay contacts 3 x 24 V DC switched output

ACG+ Sensors

O2 Sensor	CO2 Sensor	CO Sensor	VOC Sensor	Water Vapor Sensor
Range	0 to 50%	0 to 1000 ppm	0 to 20 ppm	0 to 100 ppm	0 to 100 mg/m3
Accuracy	±(0.035% O2 + 1% of reading + ±(0.035% O2 + 1% of reading + 0.15% of reading/°C)	±(25 ppm CO2 + 1% of reading + 1 ppm CO2/°C)	±(1 ppm CO + 5% of reading + 0.1 ppm CO/°C)	±(1 ppm VOC + 5% of reading + 0.25% of reading/°C)	±(0.15 mg/m3 H2O + 20% of reading)
Technology	Analox MEC intelligent electrochemical oxygen sensor	Analox 5S3 intelligent NDIR sensor	Analox MEC intelligent electrochemical sensor	Analox MEC intelligent PID sensor	Water vapour sensor using capacitive technology

Click here to download Data Sheet

Click here to download Quick Start Guide

Click here to download User Manual

Weight N/A N/A N/A N/A N/A N/A

Dimensions N/A N/A N/A N/A N/A N/A

Additional information

Click outside to hide the comparison bar

Compare