View cart “Volumetric Flask 250ml” has been added to your cart.

AGA- Phlebology table

~~$0.00~~

Shipped From Abroad

Phlebology tables with a 3-piece tabletop, also for use as an examination chair

The 3-piece phlebology tables AGA-PHLEBO-LIFT and AGA-PHLEBO-MAT from AGA Sanitätsartikel can be used not only in phlebology and dermatology. They can be converted into a gynaecology, rectoscopy or proctology examination chair in just a few seconds. The 3-piece vein treatment tables are also equipped with an electric motor for tilt adjustment as standard. On the AGA-PHLEBO-LIFT, Article No.: VEKO-1060/3EE, there is a second electric motor for height adjustment in addition to the electric motor for tilt adjustment.

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Sku:

SF1033560130137-16

Description
Reviews (0)

Description

If necessary, for example when a patient collapses, the phlebology tables can be adjusted from the almost vertical position (74°) to the horizontal position (0°) to the shock position (20° negative).
The stability and robustness is achieved by the gusset plates in the frame corners.
The base, which is equipped with levelling feet, guarantees a high level of stability, even in the almost vertical upholstery position, in conjunction with the pull-out support rod, even under stress.
The shockproof and scratch-resistant covers on the column and base, like all other components, are easy to clean.
The three upholstery segments (back, seat and foot sections) each have a thickness of 64 mm.
The AGA-PHLEBO-MAT, Article No.: VEKO-1062/3E, has a fixed working height (930 mm) in the horizontal upholstered position. The height adjustment cannot be retrofitted.
The AGA-PHLEBO-LIFT, Article No.: VEKO-1060/3EE, is also equipped with an electromotive height adjustment (730 – 930 mm, measured in the horizontal upholstered position).
The height and tilt adjustments are done with maintenance-free and splash-proof and extremely quiet electric drives, controlled via foot switches (alternatively, at no extra charge, via a hand switch). The adjustment systems are equipped with key locks. Connection values per motor: 230V, 50/60 Hz., 3.7A, 850W, IPX4, v=11mm/s, 10,000N.
The headrest can be adjusted continuously up to +30°, using a gas pressure spring.
Cutouts are incorporated into the seat and foot sections.

Technical data

	AGA-PHLEBO-LIFT	AGA-PHLEBO-MAT
Article number	VEKO-1060/3EE	VEKO-1062/3E
Frame	Lacquered
Length Back/seat/foot sections	1,900 mm 1,020 / 365 / 465 mm
Width	620 mm (680 mm with standard rails)
Height adjustment	730 – 930 mm (electric motor)	–
Height	–	930 mm
Tilt adjustment	-20º / +74º (electric motor)
Upholstery segments	3 sections
Upholstery thickness	64 mm
Back section adjustment	+30º (gas pressure spring)
Load capacity	150 kg
Leg section adjustment	Folding down using locking pins

The standard configuration includes:

A pair of side-mounted standard surgical rails, dimensions 25 x 10 mm, made of CrNi steel, length 900 mm.
A pair of black ring armrests, including fastening clamps for standard surgical rails.
A removable footboard, dimensions 490 x 320 mm, thickness 15 mm, black, with anti-slip surface.
The foot switch(es).
A safety support rod that can be pulled out from the floor frame.
A cutout at the foot of the leg section for easier getting on and off.
A floor frame with levelling feet.
A neck roll with two straps, fixed to the back cushion.
A cutout in the seat cushion for gynaecological examinations.
A safety limit switch to avoid damage caused by the folded leg section.

Accessories & additional options

Article No.	Description
A-2047	Arm support, swivel-mounted, black PU-foam arm shell, dimensions approx. 400 x 120 mm (L x W), with 2 Velcro fasteners to secure the arm to the shell, chrome-plated holder with attachment for standard rail.
FR-60	Heel rest, recommended for use when bandaging. The patient can place their heels on the roll, which is attached to the black footboard with Velcro fasteners giving the medical personnel both hands free to bandage the patient’s legs. Retrofitting is not possible.
LR/Z-50	Mobile base with central locking castor system, welded into the base frame (dimensions approx. 1,000 x 450 mm), consisting of 2 swivel and 2 fixed castors, Ø 50 mm, foot pedal with black cap located towards the head end. Retrofitting is not possible.
P-2065/A	Paper roll holder, with mounting hardware, chrome-plated, consisting of two mounting kits (square steel tube 30 x 30 x 2 mm, length approx. 150 mm), two brackets, two clamps and a paper roll holder bar (length 615 mm, Ø 20 x 1 mm), for mounting on the upholstery frame.
PEF-1043	Upholstered insert, to close the cutout at the foot end of the upholstered tabletop, see upholstery colours.
PG-220	Patient belt, dimensions 2,200 x 250 mm (L x W), sewn from synthetic leather, with Velcro closure (hook and loops straps), see upholstery colours.
VA-40/V	Stainless steel bowl, with holder and safety limit switch, dimensions approx. 300 x 200 x 65 mm, located directly under the seat section. Retrofitting is not possible.

Reviews

There are no reviews yet.

Be the first to review “AGA- Phlebology table”

Quick Comparison

Settings AGA- Phlebology table remove Lab/Ward Coat remove Bunsen Burner remove Optika B-150D-BRPL Digital Binocular Microscope remove Volumetric Flask 500ml remove Optika B-150P-BRPL Binocular Polarizing Microscope remove

Name AGA- Phlebology table remove Lab/Ward Coat remove Bunsen Burner remove Optika B-150D-BRPL Digital Binocular Microscope remove Volumetric Flask 500ml remove Optika B-150P-BRPL Binocular Polarizing Microscope remove

Image

SKU SF1033560130137-16 SF1033560084-222 SF1033560084-155 SF1033560098-2 SF1033560084-188 SF1033560098-3

Rating

Price

~~$0.00~~

$11.00

$4.25

~~$0.00~~

$4.10

~~$0.00~~

Stock

Availability

Add to cart

Description

Shipped From Abroad

Phlebology tables with a 3-piece tabletop, also for use as an examination chair

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock

This white coat laboratory coat is a knee-length overcoat/smock is perfect for professionals in the medical field or by those involved in laboratory work.
This garment is Easy to wash and made from a cotton polyester blend, allowing it to be washed at high temperature and make it easy to see if it is clean.
Easy to wash.

Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock

Item: Bunsen Burner
Btu Output: 800 - 1200
Overall Height: 6-1/8"
Fuel Type: Natural
Barb Size: 7/16"

Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped from Abroad Cordless digital binocular microscope ideal for students and primary schools, with four PLAN achromatic lenses (1000x), FN 18 high eyepoint eyepieces, finite optical system, coaxial focusing, mechanical stage, Abbe condenser and powerful, uniform, white color temperature 1 W X-LED1 illumination.

Delivery & Availability: Typically 21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock

Made of borosilicate glass
With rim, class A
ISO 1042
Diameter 100mm Height 260mm
Accuracy +/-0,25ml

Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped from Abroad Cordless binocular polarized light microscope ideal for students and primary schools, with three PLAN achromatic lenses (400x), FN 18 high eyepoint eyepieces, finite optical system, coaxial focusing, rotating stage, Abbe condenser and powerful, uniform, white color temperature 1 W X-LED1 illumination.

Delivery & Availability: Typically 21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Content

If necessary, for example when a patient collapses, the phlebology tables can be adjusted from the almost vertical position (74°) to the horizontal position (0°) to the shock position (20° negative).
The stability and robustness is achieved by the gusset plates in the frame corners.
The base, which is equipped with levelling feet, guarantees a high level of stability, even in the almost vertical upholstery position, in conjunction with the pull-out support rod, even under stress.
The shockproof and scratch-resistant covers on the column and base, like all other components, are easy to clean.
The three upholstery segments (back, seat and foot sections) each have a thickness of 64 mm.
The AGA-PHLEBO-MAT, Article No.: VEKO-1062/3E, has a fixed working height (930 mm) in the horizontal upholstered position. The height adjustment cannot be retrofitted.
The AGA-PHLEBO-LIFT, Article No.: VEKO-1060/3EE, is also equipped with an electromotive height adjustment (730 - 930 mm, measured in the horizontal upholstered position).
The height and tilt adjustments are done with maintenance-free and splash-proof and extremely quiet electric drives, controlled via foot switches (alternatively, at no extra charge, via a hand switch). The adjustment systems are equipped with key locks. Connection values per motor: 230V, 50/60 Hz., 3.7A, 850W, IPX4, v=11mm/s, 10,000N.
The headrest can be adjusted continuously up to +30°, using a gas pressure spring.
Cutouts are incorporated into the seat and foot sections.

Technical data

	AGA-PHLEBO-LIFT	AGA-PHLEBO-MAT
Article number	VEKO-1060/3EE	VEKO-1062/3E
Frame	Lacquered
Length Back/seat/foot sections	1,900 mm 1,020 / 365 / 465 mm
Width	620 mm (680 mm with standard rails)
Height adjustment	730 - 930 mm (electric motor)	-
Height	-	930 mm
Tilt adjustment	-20º / +74º (electric motor)
Upholstery segments	3 sections
Upholstery thickness	64 mm
Back section adjustment	+30º (gas pressure spring)
Load capacity	150 kg
Leg section adjustment	Folding down using locking pins

The standard configuration includes:

A pair of side-mounted standard surgical rails, dimensions 25 x 10 mm, made of CrNi steel, length 900 mm.
A pair of black ring armrests, including fastening clamps for standard surgical rails.
A removable footboard, dimensions 490 x 320 mm, thickness 15 mm, black, with anti-slip surface.
The foot switch(es).
A safety support rod that can be pulled out from the floor frame.
A cutout at the foot of the leg section for easier getting on and off.
A floor frame with levelling feet.
A neck roll with two straps, fixed to the back cushion.
A cutout in the seat cushion for gynaecological examinations.
A safety limit switch to avoid damage caused by the folded leg section.

Accessories & additional options

Article No.	Description
A-2047	Arm support, swivel-mounted, black PU-foam arm shell, dimensions approx. 400 x 120 mm (L x W), with 2 Velcro fasteners to secure the arm to the shell, chrome-plated holder with attachment for standard rail.
FR-60	Heel rest, recommended for use when bandaging. The patient can place their heels on the roll, which is attached to the black footboard with Velcro fasteners giving the medical personnel both hands free to bandage the patient's legs. Retrofitting is not possible.
LR/Z-50	Mobile base with central locking castor system, welded into the base frame (dimensions approx. 1,000 x 450 mm), consisting of 2 swivel and 2 fixed castors, Ø 50 mm, foot pedal with black cap located towards the head end. Retrofitting is not possible.
P-2065/A	Paper roll holder, with mounting hardware, chrome-plated, consisting of two mounting kits (square steel tube 30 x 30 x 2 mm, length approx. 150 mm), two brackets, two clamps and a paper roll holder bar (length 615 mm, Ø 20 x 1 mm), for mounting on the upholstery frame.
PEF-1043	Upholstered insert, to close the cutout at the foot end of the upholstered tabletop, see upholstery colours.
PG-220	Patient belt, dimensions 2,200 x 250 mm (L x W), sewn from synthetic leather, with Velcro closure (hook and loops straps), see upholstery colours.
VA-40/V	Stainless steel bowl, with holder and safety limit switch, dimensions approx. 300 x 200 x 65 mm, located directly under the seat section. Retrofitting is not possible.

This white coat laboratory coat is a knee-length overcoat/smock is perfect for professionals in the medical field or by those involved in laboratory work.
This garment is Easy to wash and made from a cotton polyester blend, allowing it to be washed at high temperature and make it easy to see if it is clean.
Easy to wash.

Item: Bunsen Burner
Btu Output: 800 - 1200
Overall Height: 6-1/8"
Fuel Type: Natural
Barb Size: 7/16"

Cordless digital binocular microscope ideal for students and primary schools, with four PLAN achromatic lenses (1000x), FN 18 high eyepoint eyepieces, finite optical system, coaxial focusing, mechanical stage, Abbe condenser and powerful, uniform, white color temperature 1 W X-LED1 illumination. Slim and easy to carry, it is equipped with all the main controls to start learning how to use an advanced microscope and with long lasting LED illumination to provide over 20 years of use. The exclusive Li-Ion battery ensures unparalleled duration and fast recharge. Features:

Observation mode: Brightfield.
Head: Binocular, 30° inclined; 360° rotating. With integrated 3.1 MP camera.
Eyepieces: WF10x/18 mm, secured by screw.
Nosepiece: Quadruple ball bearings revolving nosepiece.
Objectives: – N-PLAN 4x/0.10 , with anti-fungus treatment – N-PLAN 10x/0.25 , with anti-fungus treatment – N-PLAN 40x/0.65 , with anti-fungus treatment – N-PLAN 100x/1.25 (Oil/Water) , with anti-fungus treatment
Specimen stage: Mechanical stage, 125x116mm, 70×30 mm X-Y movement range. Vernier scale on the two axes, accuracy: 0.1mm.
Focusing: Coaxial coarse and fine focusing mechanism with limit stop to prevent the contact between objective and specimen. Adjustable tension of coarse focusing knob.
Condenser: Abbe N.A. 1.25, pre-centered, focusable, with iris diaphragm.
Illumination: X-LED¹ with white 1 W LED and light intensity control.
Color temperature: 6,300 K. Li-Ion battery for long lasting operation. Multi-plug 100-240Vac/5Vdc external power supply.

Technical Specifications:

Observation Method - Transmitted Light	Brightfield	Yes
	Simple polarized light	As optional
Main Body	Type	Upright
	Construction material	Aluminum die-cast
Head	Head	Binocular (Siedentopf)
	Inclination	30°
	360° rotating	Yes
	Interpupillary distance (mm)	48-75
	Dioptric adjustement	On left tube
	Fixing screw for eyepieces	Yes
	Tube inner diameter (mm)	23
Eyepieces	Field number (mm)	18
	Magnification	10x
	High eyepoint (for glass wearers)	Yes
	Pointer	As optional
	Micrometric scale	As optional
	Diameter of micrometer glass (mm)	20
Nosepiece	Positions	Quadruple
	Bi-directional	Yes
	Rotation on ball bearings	Yes
	Objective thread	RMS
Objectives	Optical system	160
	Anti-fungus treatment	Yes
	Parfocal distance (mm)	45
	Standard magnifications	40x-1000x
	Type	N-PLAN
	Objectives included	4x/0.10, W.D. 15.2 mm
		10x/0.25, W.D. 5.5 mm
		40x/0.65, W.D. 0.45 mm
		100x/1.25 (Oil/Water), W.D. 0.13 mm
Stage	Type	Double layer
	Dimensions (mm)	125x116
	Moving mechanism	Rack and pinion
	Moving range (mm)	70x30
	Material	Anti-scratch painting
	Specimen holder	Yes
	Slide number	1
	X-Y Vernier scale	Yes
	Vernier scale accuracy (mm)	0.1
Condenser - Single Position	Type	Abbe
	Numerical aperture (N.A.)	1.25
	Diaphragms	Iris
	Centrable	Pre-centered
	Focusable	By rotation
Focusing System	Type	Coaxial coarse & fine
	Coarse total travel (mm)	16
	Fine total travel (per single rotation) (mm)	0.4
	Fine graduations	100
	Fine resolution (µm)	4
	Upper stop to prevent contact	Yes
	Adjustable tension	Yes
Transmitted Illumination	Type	X-LED
	X-LED type	X-LED1
	Light source power (W)	1
	Brightness control	Manual
	Lifetime (hours)	> 65,000
	Temperature (K)	6,300
	Max. required power (W)	1.5
Power Supply for Transmitted Illumination	Type	External
	Microscope connector	Jack, 2.1 mm
	Power plug type	Multi-plug (EU, UK, US)
	Input voltage	100/240 Vac, 50/60 Hz
	Output voltage	5 Vdc 500 mA
	LED indicator	Yes
	Rechargeable batteries	Yes
	Battery type	Li-ion (battery pack)
	Working time of batteries (hours)	15
	Charging time of batteries (hours)	6
Accessories Included	Dust cover	Yes
	Immersion oil (10ml)	Yes
	Tension adjustment tool	Yes
	User Manual	Digital version (downloadable)
	USB cable (m)	1.8
	CD-ROM	Yes
Additional Information		Mirror for transmitted light (as optional)
Product Dimensions	Height (mm)	365
	Width (mm)	170
	Depth (mm)	320
Product Weight	(kg)	4
Digital Head	Resolution (MP)	3.2
	Sensor type	CMOS
	Sensor size	1/2.5"
	Sensor aspect ratio	4/3
	Full image size	2048x1536
	Pixel size (µm)	2.2x2.2
	Frame rate	4 fps (2048x1536), 8 fps (1280x1024), 30 fps (640x480)
	S/N ratio (dB)	40
	Dynamic range (dB)	66.5
	Sensitivity (V/lux*s @550nm)	0.53
	Exposure time (s)	15 - 1/1500
	USB type	2.0
	System requirements	Win 7 / Win 8 / Win 10 (32/64 bit)
	Software	OPTIKA PROView

Made of borosilicate glass
With rim, class A
ISO 1042
Diameter 100mm Height 260mm
Accuracy +/-0,25ml

Cordless binocular polarized light microscope ideal for students and primary schools, with three PLAN achromatic lenses (400x), FN 18 high eyepoint eyepieces, finite optical system, coaxial focusing, rotating stage, Abbe condenser and powerful, uniform, white color temperature 1 W X-LED1 illumination. Slim and easy to carry, it is equipped with all the main controls to start learning how to use an advanced microscope and with long lasting LED illumination to provide over 20 years of use. Rotating swing-out polarizer and sliding-out fixed analyzer included. The exclusive Li-Ion battery ensures unparalleled duration and fast recharge. Features:

Observation mode: Brightfield, Polarized Light.
Head: Binocular, 30° inclined; 360° rotating.
Eyepiece: WF10x/18 mm, secured by screw.
Nosepiece: Quadruple ball bearings revolving nosepiece.
Objectives: – N-PLAN 4x/0.10, with anti-fungus treatment – N-PLAN 10x/0.25 , with anti-fungus treatment – N-PLAN 40x/0.65 , with anti-fungus treatment
Specimen stage: Rotatable round stage, 120 mm diameter.
Focusing: Coaxial coarse and fine focusing mechanism with limit stop to prevent the contact between objective and specimen. Adjustable tension of coarse focusing knob.
Condenser: N.A. 1.25, pre-centered, fixed with iris diaphragm.
Illumination: X-LED¹ with white 1 W LED and light intensity control.
Color temperature: 6,300 K. Li-Ion battery for long lasting operation. Multi-plug 100-240Vac/5Vdc external power supply.
Polarizing filters: Rotating Polarizer (swing-out) and fixed Analyzer (sliding-out).

Technical Specifications:

Observation Method - Transmitted Light	Brightfield	Yes
	Simple polarized light	Yes
Main Body	Type	Upright
	Construction material	Aluminum die-cast
Head	Type	Binocular (Siedentopf)
	Inclination	30°
	360° rotating	Yes
	Interpupillary distance (mm)	48-75
	Dioptric adjustement	On left tube
	Fixing screw for eyepieces	Yes
	Tube inner diameter (mm)	23
Eyepieces	Field number (mm)	18
	Magnification	10x
	High eyepoint (for glass wearers)	Yes
	Pointer	As optional
	Micrometric scale	As optional
	Diameter of micrometer glass (mm)	20
Nosepiece	Positions	Quadruple
	Bi-directional	Yes
	Rotation on ball bearings	Yes
	Objective thread	RMS
Objectives	Optical system	160
	Anti-fungus treatment	Yes
	Parfocal distance (mm)	45
	Standard magnifications	40x-400x
	Type	N-PLAN
	Objectives included	4x/0.10, W.D. 15.2 mm 10x/0.25, W.D. 5.5 mm 40x/0.65, W.D. 0.45 mm
Stage	Type	Round
	Rotation	360°
	Dimensions (mm)	120
	Material	Anti-scratch painting
	Specimen clips	Yes
	Slide number	1
Condenser - Single Position	Type	Fixed
	Numerical aperture (N.A.)	1.25
	Diaphragms	Iris
	Centrable	Pre-centered
Focusing System	Type	Coaxial coarse & fine
	Coarse total travel (mm)	16
	Fine total travel (per single rotation) (mm)	0.4
	Fine graduations	100
	Fine resolution (µm)	4
	Upper stop to prevent contact	Yes
	Adjustable tension	Yes
Transmitted Illumination	Type	X-LED
	X-LED type	X-LED1
	Light source power (W)	1
	Brightness control	Manual
	Lifetime (hours)	> 65,000
	Temperature (K)	6,300
	Max. required power (W)	1.5
Power Supply for Transmitted Illumination	Type	External
	Microscope connector	Jack, 2.1 mm
	Power plug type	Multi-plug (EU, UK, US)
	Input voltage	100/240 Vac, 50/60 Hz
	Output voltage	5 Vdc 500 mA
	LED indicator	Yes
	Rechargeable batteries	Yes
	Battery type	Li-ion (battery pack)
	Working time of batteries (hours)	15
	Charging time of batteries (hours)	6
Accessories Included	Dust cover	Yes
	Tension adjustment tool	Yes
	User Manual	Digital version (downloadable)
Additional Information		Rotating polarizer (swing-out) and fixed analyzer (sliding-out) filters
Product Weight	Height (mm)	350
	Width (mm)	170
	Depth (mm)	320
Product Weight	(kg)	4