View cart “Measuring Beaker 250ml” has been added to your cart.

Chemistry-Experiments / Health Education

Ax60+ Kiosk

Brands: Analox

~~$0.00~~

Shipped From Abroad

Key Features

Low maintenance
Quick Connect System
Pre-wired, ready to go
Can support up to 4 alarm units
Push button for unit testing

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Sku:

SF1033560130141-6

Brands:: Analox

Description
Reviews (0)

Description

CO2 MONITOR & ALARM DESIGNED FOR KIOSKS

The Ax60+ Kiosk is a CO2 monitor and alarm specifically designed by Analox to alert personnel to a build up/leak of CO2 using a state-of-the-art infrared sensor. The alarm provides both audio and visual alerts in the case of increased levels of carbon dioxide (CO2). Up to four alarms can be added as needed and the unit does not need periodic calibration.

CO2 monitoring with the AX60+ Kiosk

The Ax60+ Kiosk is a smaller version of the popular Ax60+ carbon dioxide (CO2) monitor. It is simple to wall mount in the area where carbon dioxide (CO2) is stored or piped.

The Ax60+ Kiosk sensor needs to be installed at a height of 12-18 inches (305-457mm) above the floor – this is because the carbon dioxide (CO₂) that leaks from a gas cylinder is denser than ambient air and can collect at low levels. The alarm should be located above the sensor at about head height or at the entrance to the kiosk.

Technical Specification

Sensor Unit


Gas detected	Carbon Dioxide (CO2)
Sensor technology	Infrared
Range	0.1% to 5%
Default alarm set-points	USA regulations (NFPA 55, IFC, NBIC, OSHA and NIOSH): TWA – 5,000ppm (0.5%) AL1 – 5,000ppm (0.5%) AL2 – 15,000ppm (1.5%) AL3 – 30,000ppm (3%) International/European regulations (EH40) (DIN 6653-2:2015-06 compliant, assessed by TUV): TWA – 5,000ppm (0.5%) AL1 – 15,000ppm (1.5%) CO2 – 30,000ppm (3%)
Warm up time	40 Seconds
Resolution	0.01%
Accuracy	±2.5% of the alarm levels
Response Time	30 seconds to T90
IP Rating	IP55
LED indicators	Green = Power

Alarm Unit


Strobe	White LED strobe, with an option to change to blue, red or amber filter.
Sounder	min 80 dBA @3 m (9.8 feet)
IP Rating	IP55
LED indicators	Green = Power, Amber = Fault
Cable	2m included

Reviews

There are no reviews yet.

Be the first to review “Ax60+ Kiosk”

Quick Comparison

Ax60+ Kiosk remove CARBON MONOXIDE MONITORING SYSTEM (AX60+ CO) remove CARBON MONOXIDE ATMOSPHERE MONITORING SYSTEM remove PERSONAL CO2/O2 MONITOR-ASPIDA remove Bunsen Burner remove Super-Full Touch Screen Water Purification System remove

Name Ax60+ Kiosk remove CARBON MONOXIDE MONITORING SYSTEM (AX60+ CO) remove CARBON MONOXIDE ATMOSPHERE MONITORING SYSTEM remove PERSONAL CO2/O2 MONITOR-ASPIDA remove Bunsen Burner remove Super-Full Touch Screen Water Purification System remove

Image

SKU SF1033560130141-6 SF1033560130141-1 SF1033560130141-2 SF1033560130141-11 SF1033560084-155 SF1033560130126-3

Rating

Price

~~$0.00~~

~~$0.00~~

~~$0.00~~

~~$0.00~~

$4.25

~~$0.00~~

Stock

Availability

Add to cart

Description

Shipped From Abroad

Key Features

Low maintenance
Quick Connect System
Pre-wired, ready to go
Can support up to 4 alarm units
Push button for unit testing

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad

The Ax60+ CO protects users in plant rooms, parking garages and anywhere that carbon monoxide can collect. The Ax60+ CO also can be used for online cylinder filling, to protect divers from compressed air contaminated with carbon monoxide related to compressor maintenance or contamination at the compressor inlet.

The Ax60+ CO benefits from the ability to operate as a single sensor and alarm or as part of a system of up to 4 sensors. Each system can also be composed of Ax60+: O2 sensors and Ax60+ CO2 sensors so it can fulfil multiple application needs.

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad

The COSAMS unit was designed specifically for use on submarines, most directly those that operate on diesel engines. Built to exacting military standards for performance, reliability and endurance, the Analox COSAMS uses proprietary Gas Filter Correlation (GFC) technology to specifically analyze the unique properties of CO.

The COSAMS (Carbon Monoxide Submarine Atmosphere Monitoring System) has been designed for use on submerged submarines to support life, where crew can be living and working for up to 90 days. Carbon monoxide can be generated on a submarine in several ways, from cooking and fire, to the incomplete combustion of diesel fuel and chlorate candles.

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad

Key Features

IP65 rated, ensuring the unit is dust tight and protected against water
Data logging capability
Man down alarm
Time Weighted Average (TWA) monitoring
Rechargeable batteries
Intelligent software – up to 2 users registered to one unit
User changeable alarms
We recommend: 23.5% for oxygen (O2) enrichment (As per NHS SOPS/EH40/OSHA); 19.5% for oxygen (O2) deficiency 0.5%; & 1.5% for carbon dioxide (CO2) enrichment

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock

Item: Bunsen Burner
Btu Output: 800 - 1200
Overall Height: 6-1/8"
Fuel Type: Natural
Barb Size: 7/16"

Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad The Super series uses city tap water as the water source, and can easily and quickly produce secondary RO (reverse osmosis) water, EDI deionized water and UP ultrapure water. It uses a standard two-stage reverse osmosis system and Ionpure EDI technology and modules to continuously produce Class II pure water with a TOC of more than 10MΩ.cm (25℃) and <30ppb, and ultrapure water of 18.2MΩ.cm (25℃). System water output: 10 liters/hour, and the daily output of pure water can reach 240 liters.

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Content

CO2 MONITOR & ALARM DESIGNED FOR KIOSKS

The Ax60+ Kiosk is a CO2 monitor and alarm specifically designed by Analox to alert personnel to a build up/leak of CO2 using a state-of-the-art infrared sensor. The alarm provides both audio and visual alerts in the case of increased levels of carbon dioxide (CO2). Up to four alarms can be added as needed and the unit does not need periodic calibration.

CO2 monitoring with the AX60+ Kiosk

The Ax60+ Kiosk is a smaller version of the popular Ax60+ carbon dioxide (CO2) monitor. It is simple to wall mount in the area where carbon dioxide (CO2) is stored or piped. The Ax60+ Kiosk sensor needs to be installed at a height of 12-18 inches (305-457mm) above the floor – this is because the carbon dioxide (CO₂) that leaks from a gas cylinder is denser than ambient air and can collect at low levels. The alarm should be located above the sensor at about head height or at the entrance to the kiosk.

Technical Specification

Sensor Unit


Gas detected	Carbon Dioxide (CO2)
Sensor technology	Infrared
Range	0.1% to 5%
Default alarm set-points	USA regulations (NFPA 55, IFC, NBIC, OSHA and NIOSH): TWA - 5,000ppm (0.5%) AL1 - 5,000ppm (0.5%) AL2 - 15,000ppm (1.5%) AL3 - 30,000ppm (3%) International/European regulations (EH40) (DIN 6653-2:2015-06 compliant, assessed by TUV): TWA - 5,000ppm (0.5%) AL1 - 15,000ppm (1.5%) CO2 - 30,000ppm (3%)
Warm up time	40 Seconds
Resolution	0.01%
Accuracy	±2.5% of the alarm levels
Response Time	30 seconds to T90
IP Rating	IP55
LED indicators	Green = Power

Alarm Unit


Strobe	White LED strobe, with an option to change to blue, red or amber filter.
Sounder	min 80 dBA @3 m (9.8 feet)
IP Rating	IP55
LED indicators	Green = Power, Amber = Fault
Cable	2m included

https://youtu.be/--wsZFTYVWs?si=nI8q1AThpkBD4yNv https://youtu.be/Bi7CmSLIIbA?si=dVXlyZaRw893no_T

Key Features

Ambient CO monitoring
Online CO monitoring
Can be used with Nitrogen (N2) background gasses or, with calibration, can be used with Helium (He) background gasses
Has up to 3 user configurable alarms
Can operate as a stand alone sensor or as part of a larger system
Compatible with the rest of the Ax60+ range

Click here to download Quick Start Guide

Click here to download Manual

Click here to download Service Manual

Key Features

Uses a GFC infra-red sensing technique ensuring the system is not sensitive to hydrogen or water vapor
Built-in auto-zero function ensures sensor stability
Real-time monitoring ensures rapid response to carbon monoxide (CO) issues as they occur
90 days data-logging allows records to be stored and used should they ever be needed
Easy to maintain allowing you to be more self-sufficient whilst minimizing downtime
Designed specifically for the submarine environment so it is able to cope with the demands of the environment in terms of EMC, shock and temperature

Technical Specifications

*Mechanical*
Nominal cabinet dimensions (exc mounting lugs)	479 x 280 x 176 mm (h x w x d)
Nominal cabinet dimensions (inc mounting lugs)	479 x 360 x 200 mm (h x w x d)
Cabinet weight	11.6 kg
Cabinet material	aluminium

*Electrical*
Electrical supply	115 V AC 60 Hz
Max power consumption	90W
Fuse rating	(F1, F2): 20 mm, 2.5A anti-surge
Signal output	4-20 mA
EMC compliance	MIL-STD-461F
ESD compliance	EN 61000-4-2

Operating temperature range	0 to +45°C
Storage temperature	40 to +70°C
Operating pressure range	800 to 1400 hPa
Extended pressure range	600 to 800 hPa (Degraded performance over this pressure range)
Storage/transport pressure range	300 to 1400 hPa
Operating humidity range	0 to 80 %RH
Extended humidity range (up to 1 hour)	80 to 100 %RH
Storage humidity range	0 to 80 %RH (temporary max. 100 %RH)
Max. roll angle	15° (constant), 45° (temporary)
Max. pitch angle	10° (constant), 30° (temporary)
Shock	Tested at 22g, 20ms (half sine) without shock isolation
Vibration	NATO STANAG 4138

CO measuring range	0 to 200 ppm
Repeatability, measured at RTP	± (1 ppm CO + 1 display count)
Accuracy across normal operating environmental envelope	±5% full scale (equivalent to ± 10 ppm)
Zero drift	±1 ppm CO/day
Cross-sensitivity to hydrogen	2% vol H2 < 1 ppm CO
Cross-sensitivity to CO2	5% vol CO2 < 1 ppm CO
Response time	T90 <60s

Click here to download Data Sheet

Click here to download Manual

The Aspida is a robust, high specification personal oxygen (O2), carbon dioxide (CO2) or dual (O2 / CO2 combined) monitor which can be worn on a belt or even wall mounted as a backup to a primary safety system.

The Aspida, (Greek for Shield) helps you comply with the regulations, will remind you when maintenance is needed and it safeguards the user from the gas risks.

Technical Specification

Aspida

Operating temperature	-5°C to +50°C
Humidity Range	0 to 99% RH
Display	High-visibility, Organic Light Emitting Diode (OLED) display
Alarm horn	95dB @ 30cm (110dB - man-down alarm)
LED indicators	1 x Green - OK, 1 x Amber - Fault, 1 x Red - Alarm
Internal data log	1 log every 30 seconds for at least 7 days of continuous use
Batteries	2 x NiMH 2100mAh AA batteries (or suitable AA type batteries)
Battery discharge time	15 hours under normal operation (passive atmospheric monitoring, minimal user interaction, no alarms)
Battery lifespan	2 years
Battery charge time	4.5 hours (from flat)
Charge power supply rating	9 V DC - 0.55A
Dimensions	127 x 44 x 90 mm / 5 x 1.7 x 3.5 inches (HxDxW)
Electronics warranty	2 years
IP rating	IP65

Aspida Sensors

CO2 Sensor	O2 Sensor
Sensor type	Analox infrared MIR	Electrochemical
Range	0.01 to 5%	0.1 to 25%
Accuracy (at standard temperature and pressure)	±2% of full scale between 0.01% and 2.5%, ±3%	±3% of full scale between 0.1% and 25%
Response time	T90 <60 seconds	T90 <30 seconds
Sensor life span	5 years	2 year (expected)

Characteristics

Personal Protection

Enriched oxygen (O2) can cause a condition on the human body called hyperoxia, enriched CO2 is highly toxic, both are a threat to life and must be safeguarded against. If an inert gas such as nitrogen (N2), argon (Ar), helium (He) or liquid nitrogen (LN2) leaks then this will deplete the levels of oxygen (O2) in the surrounding area, creating a dangerous atmosphere. The Aspida can offer personal protection and alerts to all of these risks, offering you true peace of mind.

Ideal Solution

Offering audible and visual alarms, data logging and a man down alarm for lone workers, it is an ideal solution to protect staff from the dangers of a leak of carbon dioxide (CO2), oxygen (O2) or inert gas. The Aspida is an affordable, easy to operate gas detection monitor and is perfect for ensuring safety in areas where the gas is piped, used or stored. It operates using rechargeable battery technology allowing it to run for more than 12 hours continuously between charges.

Click here to download User Manual

Click here to download Data Sheet

Download Aspida Software

Item: Bunsen Burner
Btu Output: 800 - 1200
Overall Height: 6-1/8"
Fuel Type: Natural
Barb Size: 7/16"

Performance characteristics

New 7.0-inch color touch screen

The new 7-inch color 16:9 widescreen high-resolution full touch screen control system provides a new fingertip touch operation experience.

4-channel water quality and 3-channel flow monitoring on the host

Source water, secondary RO water, EDI deionized water, UP ultrapure w

The lab optimized standard two-stage reverse osmosis system

The use of dual pumps, dual membranes and transition water tanks reduces system energy consumption and wastewater, ensuring stable water quality under different source water conditions.

ater, 4-way water quality online monitoring and water quality exceeding standard alarm function.

1-way source water flow statistics, EDI deionized water and UP ultrapure water 2-way high-precision quantitative water extraction function.

Standard-50L PE pure water tank

The polyethylene pure water tank with conical bottom design contains an air filter, which can effectively absorb CO2, organic matter and filter bacteria and particles, and can be equipped with UV ultraviolet irradiation sterilization components.

Features and Advantages

Built-in 3-pump system with primary and secondary RO booster pumps and circulation disinfection pumps to achieve complete two-stage reverse osmosis, system circulation and disinfection functions
Full-level filter element alarm prompt function based on time and flow, showing the used and remaining life of consumables
Automatic detection and alarm functions such as system water shortage alarm, water tank full alarm, water quality exceeding standard alarm, consumable life end alarm, water leakage protection alarm, etc. provide safety guarantee
Fully automatic RO membrane anti-scaling flushing program (flushing interval and duration can be set) to extend the service life of the RO membrane
Built-in SD card, can store and view operation data charts and curves, and can be inserted into a USB flash drive for complete data export, providing data traceability
With USB interface system program upgrade function, and optional WIFI module
Built-in perpetual calendar clock, convenient for consumables management and service settings
Ultrapure water full pipeline dosing disinfection function, just add disinfection tablets to start the one-key disinfection program to ensure high-quality pure water
Ultrapure water circulation function, which can be started and shut down freely to maintain low bacterial contamination level in the system
Factory and customer secondary passwords, system parameter settings are all password protected to prevent unauthorized changes
Compatible with 2 pure water storage methods of pressure water barrels to meet different application needs
High-strength all-engineering plastic chassis, ergonomic design, beautiful appearance, no corrosion and rust, ensure the cleanliness of the machine body, in line with GLP specifications
Unique 4-door design, pretreatment, RO and ultra-purification components, EDI and TOC modules, water tanks and control components adopt independent modular structures, making system maintenance more convenient
Pipes and joints are NSF certified to minimize TOC precipitation in the system and ensure the highest pure water quality
Powerful pre-treatment components, combined with 5μm PP transparent filter, KDF composite filter, coconut shell water-washing grade precision activated carbon filter, effectively protect the RO membrane
DOW RO reverse osmosis membrane, RO membrane components optimized by The lab, achieve the combination of long life, stability and high desalination rate of RO membrane
The new integrated ultra-purification component of DOW resin ensures that the water produced reaches 18.2MΩ.cm and reduces TOC precipitation
Ultra-long life 254&185nm dual wavelength UV lamp, combined with medical grade 316L flow hood, effectively sterilizes, reduces TOC, and enhances the system's application range
UF ultrafiltration components, molecular weight cut-off: MWCO5000D, effectively remove pyrogens/endotoxins, can be used for precision cell culture and IVF
Double-layer terminal sterilizing filter, accuracy: (0.45+0.1)μm, using PES polyethersulfone composite filter membrane, double-layer filtration design to ensure the terminal effluent is sterile

Technical Parameters

name	Basic	Heat removal prototype	Low organic matter type	Comprehensive	Built-in TOC monitor
model	Super 10	Super 10F	Super 10V	Super 10FV	Super-TOC10V	Super-TOC 10FV
Pure water output	10 L/hour
Ultrapure water output	Up to 2.0L/min (when there is water in the water tank)
Ultrapure water index
Resistivity (25℃)	18.2MΩ.cm
Total Organic Carbon TOC*	<10ppb	<10ppb	<3ppb	<3ppb	<3ppb	<3ppb
bacteria	<0.01cfu/ml
Particles (>0.1μm)	<1/ml
Pyrogens/endotoxins	N/A	<0.001Eu/ml	N/A	<0.001Eu/ml	N/A	<0.001Eu/ml
RNases	N/A	<1pg/ml	N/A	<1pg/ml	N/A	<1pg/ml
Deoxyribonucleases (DNases)	N/A	<5pg/ml	N/A	<5pg/ml	N/A	<5pg/ml
Pure water index
Resistivity*	>5MΩ.cm
Total Organic Carbon (TOC)*	<30ppb
Silicon Rejection Rate	>99.9%
Source water requirements	Urban drinking tap water, water temperature 5-45℃, water pressure 1.0-4.0Kgf/cm2
Size and weight	Length × width × height: 545 × 470 × 649 mm, weight: about 35 kg
Electrical requirements	220-240V, 50/60Hz
power	240W
System Configuration	Host (including 1 set of purification column) + TOC monitor (TOC type) + 50L PE ultrapure water storage tank

Weight N/A N/A N/A N/A N/A N/A

Dimensions N/A N/A N/A N/A N/A N/A

Additional information

Click outside to hide the comparison bar

Compare