View cart “Glass Measuring Cylinder 250ml” has been added to your cart.

Chemistry-Experiments / Health Education

Ax60+ Kiosk

Brands: Analox

~~$0.00~~

Shipped From Abroad

Key Features

Low maintenance
Quick Connect System
Pre-wired, ready to go
Can support up to 4 alarm units
Push button for unit testing

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Sku:

SF1033560130141-6

Brands:: Analox

Description
Reviews (0)

Description

CO2 MONITOR & ALARM DESIGNED FOR KIOSKS

The Ax60+ Kiosk is a CO2 monitor and alarm specifically designed by Analox to alert personnel to a build up/leak of CO2 using a state-of-the-art infrared sensor. The alarm provides both audio and visual alerts in the case of increased levels of carbon dioxide (CO2). Up to four alarms can be added as needed and the unit does not need periodic calibration.

CO2 monitoring with the AX60+ Kiosk

The Ax60+ Kiosk is a smaller version of the popular Ax60+ carbon dioxide (CO2) monitor. It is simple to wall mount in the area where carbon dioxide (CO2) is stored or piped.

The Ax60+ Kiosk sensor needs to be installed at a height of 12-18 inches (305-457mm) above the floor – this is because the carbon dioxide (CO₂) that leaks from a gas cylinder is denser than ambient air and can collect at low levels. The alarm should be located above the sensor at about head height or at the entrance to the kiosk.

Technical Specification

Sensor Unit


Gas detected	Carbon Dioxide (CO2)
Sensor technology	Infrared
Range	0.1% to 5%
Default alarm set-points	USA regulations (NFPA 55, IFC, NBIC, OSHA and NIOSH): TWA – 5,000ppm (0.5%) AL1 – 5,000ppm (0.5%) AL2 – 15,000ppm (1.5%) AL3 – 30,000ppm (3%) International/European regulations (EH40) (DIN 6653-2:2015-06 compliant, assessed by TUV): TWA – 5,000ppm (0.5%) AL1 – 15,000ppm (1.5%) CO2 – 30,000ppm (3%)
Warm up time	40 Seconds
Resolution	0.01%
Accuracy	±2.5% of the alarm levels
Response Time	30 seconds to T90
IP Rating	IP55
LED indicators	Green = Power

Alarm Unit


Strobe	White LED strobe, with an option to change to blue, red or amber filter.
Sounder	min 80 dBA @3 m (9.8 feet)
IP Rating	IP55
LED indicators	Green = Power, Amber = Fault
Cable	2m included

Reviews

There are no reviews yet.

Be the first to review “Ax60+ Kiosk”

Quick Comparison

Ax60+ Kiosk remove PARTIAL PRESSURE O2 ANALYSER remove Conical Glass Flask 1000ml remove PERSONAL CO2/O2 MONITOR-SUB-ASPIDA remove Bunsen Burner remove PERSONAL CO2/O2 MONITOR-ASPIDA remove

Name Ax60+ Kiosk remove PARTIAL PRESSURE O2 ANALYSER remove Conical Glass Flask 1000ml remove PERSONAL CO2/O2 MONITOR-SUB-ASPIDA remove Bunsen Burner remove PERSONAL CO2/O2 MONITOR-ASPIDA remove

Image

SKU SF1033560130141-6 SF1033560130141-19 SF1033560084-157 SF1033560130141-13 SF1033560084-155 SF1033560130141-11

Rating

Price

~~$0.00~~

$6.70

~~$0.00~~

$4.25

~~$0.00~~

Stock

Availability

Add to cart

Description

Shipped From Abroad

Key Features

Low maintenance
Quick Connect System
Pre-wired, ready to go
Can support up to 4 alarm units
Push button for unit testing

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad

Key Features

Compact in size making it ideal for confined space use
Fitted with a reliable PPO2 sensor, proven and tested within the hyperbaric environment
Large LCD display making readings easy to view

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock

Capacity	1000ml
Application	Chemical Laboratory
Brand	Lab Glass
Material	Glass
Color	Transparent

Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad

Key features

It is the only portable monitor to be pressure corrected ensuring no false readings are given
The Sub Aspida is compact in size (127 x 44 x 90mm LxDxW)
The oxygen (O2) sensor can be calibrated on air, reducing costly gas requirements and making you self sufficient in the maintenance of the sensor
The carbon dioxide (CO2) sensor only needs calibrating every 12 months
OLED (Organic Light Emitting Diode) display
Pressure compensated CO2 & O2 sensors
Rechargeable battery-operated (NiMH)
Datalogging
Man-down alarm
Can offer continuous monitoring or spot checking
Audio, visual and vibration alarms
TWA (Time Weighted Average) Alarm
User maintainable
Can be worn on the belt or clipped to a panel
Pressure range of 700-1200mbara
Maintenance reminders as standard

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock

Item: Bunsen Burner
Btu Output: 800 - 1200
Overall Height: 6-1/8"
Fuel Type: Natural
Barb Size: 7/16"

Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad

Key Features

IP65 rated, ensuring the unit is dust tight and protected against water
Data logging capability
Man down alarm
Time Weighted Average (TWA) monitoring
Rechargeable batteries
Intelligent software – up to 2 users registered to one unit
User changeable alarms
We recommend: 23.5% for oxygen (O2) enrichment (As per NHS SOPS/EH40/OSHA); 19.5% for oxygen (O2) deficiency 0.5%; & 1.5% for carbon dioxide (CO2) enrichment

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Content

CO2 MONITOR & ALARM DESIGNED FOR KIOSKS

CO2 monitoring with the AX60+ Kiosk

The Ax60+ Kiosk is a smaller version of the popular Ax60+ carbon dioxide (CO2) monitor. It is simple to wall mount in the area where carbon dioxide (CO2) is stored or piped. The Ax60+ Kiosk sensor needs to be installed at a height of 12-18 inches (305-457mm) above the floor – this is because the carbon dioxide (CO₂) that leaks from a gas cylinder is denser than ambient air and can collect at low levels. The alarm should be located above the sensor at about head height or at the entrance to the kiosk.

Technical Specification

Sensor Unit


Gas detected	Carbon Dioxide (CO2)
Sensor technology	Infrared
Range	0.1% to 5%
Default alarm set-points	USA regulations (NFPA 55, IFC, NBIC, OSHA and NIOSH): TWA - 5,000ppm (0.5%) AL1 - 5,000ppm (0.5%) AL2 - 15,000ppm (1.5%) AL3 - 30,000ppm (3%) International/European regulations (EH40) (DIN 6653-2:2015-06 compliant, assessed by TUV): TWA - 5,000ppm (0.5%) AL1 - 15,000ppm (1.5%) CO2 - 30,000ppm (3%)
Warm up time	40 Seconds
Resolution	0.01%
Accuracy	±2.5% of the alarm levels
Response Time	30 seconds to T90
IP Rating	IP55
LED indicators	Green = Power

Alarm Unit


Strobe	White LED strobe, with an option to change to blue, red or amber filter.
Sounder	min 80 dBA @3 m (9.8 feet)
IP Rating	IP55
LED indicators	Green = Power, Amber = Fault
Cable	2m included

Description

The HYP is a rugged and compact portable partial pressure monitor. Simple to operate, the HYP accurately reads oxygen (O2) levels within the hyperbaric environment.

O2 monitoring with the HYP

Classification bodies and industry guidelines within the diving market require each hyperbaric chamber to have a means of providing independent oxygen (O2) monitoring in the event of the primary monitor failing. The HYP is a portable PPO2 monitor capable of helping you to achieve such guidelines.

Oxygen Sensor

The compact size allows for convenient fitting within confined spaces such as diving bells and hyperbaric lifeboats, or alternatively the unit can easily be hand carried. It is very simple to use, with just a single push-button to switch power on and off, and an LCD display. It may be used at depths of up to 600MSW / 2000FSW, and can also be used at surface pressures.

Technical Specification

HYP

Range	0.00 to 2.00bar ppO2
Accuracy	± 1% of reading, ± 1LSD
Sensor warranty	3 months
Sensor response	<15 secs to T90
Sensor Life	Up to 3 years in air at (STP)
Power	9V Alkaline (PP3)
Battery life	1 month (800 hours) continuous operation or 3 months operation for 8 hours per day
Electronics Warranty	1 Year
Operating temperature	0°C to 40°C
Operating pressure	0.8 to 60 bar absolute (approx. 600MSW/2000FSW)
Dimensions	H 98mm x D 36mm x W 64 mm
Weight	200g
Replacement sensor	9100-9212-5H

Additional key features

Accurate and fast response to O2 levels

Compact and robust housing
Easy to read large display
Versatile, the HYP is suitable for use in; diving bells, hyperbaric chambers, hyperbaric lifeboats and submarines
Calibration every 6 months

Click here to download Data Sheet

Click here to download Quick Start Guide

Click here to download User Manual

Capacity	1000ml
Application	Chemical Laboratory
Brand	Lab Glass
Material	Glass
Color	Transparent

Description

The Sub Aspida is a personal, portable monitor which is used to detect levels of carbon dioxide (CO2) and oxygen (O2) in pressurized environments.

CO2 monitoring & O2 monitoring with the Sub Aspida

Unlike industrial sensing monitors, the Sub Aspida was designed with pressure corrected sensors, giving you 100% confidence in your readings. The Sub Aspida has been upgraded to support those who work at high altitude. Pressure tested to 10,000 ft or 700 MB, the Sub Aspida will remain accurate and reliable when monitoring CO2 and O2 in the atmosphere, meaning you can concentrate on the job at hand!

Technical Specification

SUB-ASPIDA

Operating temperature	0°C to +50°C
Operating pressure	700 to 1200 mbara
Humidity Range	0 to 99% RH
Display	High-visibility, Organic Light Emitting Diode (OLED) display
Alarm horn	95dB @ 30cm
LED indicators	1 x Green - OK, 1 x Amber - Fault, 1 x Red - Alarm
Internal data log	1 log every 30 seconds for at least 7 days of continuous use
Batteries	2 x NiMH 2100mAh AA batteries (or suitable AA type batteries)
Battery discharge time	12 hours under normal operation (Passive atmospheric monitoring, minimal user interaction, no alarms)
Battery lifespan	2 years
Battery charge time	4.5 hours (from flat)
Charge power supply rating	9 V DC - 0.55A, DC jack 5.5x12.0x2.1mm centre +ve
Electronics warranty	2 years
IP rating	IP65
Dimensions	127 x 44 x 90 mm / 5 x 1.7 x 3.5 inches (LxDxW)
Weight	335g/11.8oz , O2 350g/12.3oz, CO2 335g/11.8oz

SENSORS

CO2 Sensor Unit	O2 Sensor Unit
Sensor type	Analox infrared MIR	Electrochemical
Accuracy (at standard temperature and pressure)	±(1% of full scale + 2% of reading)	±1% of full scale (For best performance, calibrate the Sub Aspida while on battery power only.)
Range	0.01 to 50.0 mbar ppCO2 (0.01 to 5% at 1000 mbara)	0.1 to 2000.0 mbar ppO2 (0.1 to 100% O2 at 1000 mbara)
Response time	T90 <60 seconds	T90 <30 seconds
Sensor life span	5 years	1 year (expected)

Item: Bunsen Burner
Btu Output: 800 - 1200
Overall Height: 6-1/8"
Fuel Type: Natural
Barb Size: 7/16"

The Aspida is a robust, high specification personal oxygen (O2), carbon dioxide (CO2) or dual (O2 / CO2 combined) monitor which can be worn on a belt or even wall mounted as a backup to a primary safety system.

The Aspida, (Greek for Shield) helps you comply with the regulations, will remind you when maintenance is needed and it safeguards the user from the gas risks.

Technical Specification

Aspida

Operating temperature	-5°C to +50°C
Humidity Range	0 to 99% RH
Display	High-visibility, Organic Light Emitting Diode (OLED) display
Alarm horn	95dB @ 30cm (110dB - man-down alarm)
LED indicators	1 x Green - OK, 1 x Amber - Fault, 1 x Red - Alarm
Internal data log	1 log every 30 seconds for at least 7 days of continuous use
Batteries	2 x NiMH 2100mAh AA batteries (or suitable AA type batteries)
Battery discharge time	15 hours under normal operation (passive atmospheric monitoring, minimal user interaction, no alarms)
Battery lifespan	2 years
Battery charge time	4.5 hours (from flat)
Charge power supply rating	9 V DC - 0.55A
Dimensions	127 x 44 x 90 mm / 5 x 1.7 x 3.5 inches (HxDxW)
Electronics warranty	2 years
IP rating	IP65

Aspida Sensors

CO2 Sensor	O2 Sensor
Sensor type	Analox infrared MIR	Electrochemical
Range	0.01 to 5%	0.1 to 25%
Accuracy (at standard temperature and pressure)	±2% of full scale between 0.01% and 2.5%, ±3%	±3% of full scale between 0.1% and 25%
Response time	T90 <60 seconds	T90 <30 seconds
Sensor life span	5 years	2 year (expected)

Characteristics

Personal Protection

Enriched oxygen (O2) can cause a condition on the human body called hyperoxia, enriched CO2 is highly toxic, both are a threat to life and must be safeguarded against. If an inert gas such as nitrogen (N2), argon (Ar), helium (He) or liquid nitrogen (LN2) leaks then this will deplete the levels of oxygen (O2) in the surrounding area, creating a dangerous atmosphere. The Aspida can offer personal protection and alerts to all of these risks, offering you true peace of mind.

Ideal Solution

Offering audible and visual alarms, data logging and a man down alarm for lone workers, it is an ideal solution to protect staff from the dangers of a leak of carbon dioxide (CO2), oxygen (O2) or inert gas. The Aspida is an affordable, easy to operate gas detection monitor and is perfect for ensuring safety in areas where the gas is piped, used or stored. It operates using rechargeable battery technology allowing it to run for more than 12 hours continuously between charges.

Additional information