Baby Transport Incubator BLF-2001T

Features

• Air temperature servo control w/ override (25-37 oC)
• Skin temperature servo control w/ override (34-37 oC)
• Humidity pad (450 ml)
• Glass-like transparent double wall hood
• Hood with front & side access door
• Hood with 2 noiseless, easy-to-open hand ports / windows
• Hood with 1 iris ports / windows
• Hood with 6 tube ports
• Drawable cradle with foam mattress
• Fixing straps
• Heavy duty stand with 4 castors (2 lockable, 3 height level, 95 - 132 cm)
• Gas cylinder holder (2 pcs)
• IV pole
• HEPA air filter
• Water resistant, foil-covered keypad with lock
• LED display for heating level/power/mode/lock/alarm
• 3 digit LED display for air/skin/battery and set
• Display of heating intensity
• Microprocessor controller
• Mains /Ambulance power cord
• Battery for 90 min operation time
• Visual and audible alarms and backup sensors
• Continuous self-test function during operation
• 110-120/220-230V/50-60Hz, 12V, 24V

Properties

• Air mode (temperature range: 25–37ºC, in override mode 37–38ºC) and Skin mode (temperature range: 34–37ºC, in override mode 37–37.5ºC) controlled by micro-computer;
• Power supply AC230V/50Hz and DC12V/10A or DC24V/6A alternatively.
• Input power: 400VA;
• Set temperature, air temperature, skin temperature and internal battery voltage can be displayed separately;
• Failure alarm indication: over-temperature, temperature deviation, sensor, motor fan failure, power failure;
• Double wall acrylic glass hood with side door, the bassinet can be pulled out;
• Natural air flow humidity;
• The height of complete unit can be adjusted;
• Oxygen cylinder and oxygen supply configuration;
• Observation lamp
• HEPA Air filter

• > 37ºC override temperature control mode
• Reusable / Disposable skin temperature sensor
• Oxygen cylinders with supply system
• Additional battery for longer operation
• Ambulance trolley
• PIP and PEEP controlled resuscitator
• O2/air blender
• Neonatal ventilator (only with ambulance trolly)
• Suction unit (only with ambulance trolly)
• Syringe pump (only with ambulance trolly)
• Ambulance aircraft base (custom design

Technical data

• Test Method: Dry Strip color-developing method
• Test Principle: Dual wavelength reflectance photometry
• Light Source: Cold Lamp with high brightness and long lifetime
• Test System: Color-indentify system with high sensitivity and repeatability
• Wavelength: 520nm, 640nm, 660nm
• Throughput: 120 Strips/Hour
• Test Mode: Single and continuous test mode are selectable
• Test Slot: Using sliding Slot, Easy to clean and replace, lower the carryover
• Waste Collection: Waste urine and waste strips can be collected automatically
• Test Strip: Use GENIUS original strips only
• Display: LCD with high brightness and resolution
• Language: Customizable language software
• Memory: Save 2000 samples results, and auto recover the results when power off during working
• Interface: RS-232 serial port, can be connected to external printer and computer Printer: Inner thermal printer, can be connected to external printer
• Report format: Half quantitative and qualitative, report the color and turbidity is available
• Result unit: SI unit and routine unit are selectable
• Status Check: Auto-check the status during power on and off, auto-indentify the alarm
• Working Environment: Temperature10℃～30℃; Humidity: 20%RH～80%RH
• Power: 100-240V, Auto adapt according to the input voltage
• Consumption: ≤80VA
• Quality System: Certified by TUV and CMD

Click Here To Download Catalogue

• Mechanic gas mixing system
• Electronic lung ventilator with 12” TFT colour display
• Valves group: open, semi-closed, closed, heated, with soda lime absorber (1,5 Kg)
• SIARETEX rapid connection device, Selectatec compatible for 2 vaporizers
• Gas supply group
• Ventilation modalities: APCV-PCV; APCV-TV; PSV; APNEA BACK-UP; VC-VAC; VC-VAC BABY; SIMV+PS (volumetric); SPONT; MANUAL.
• Measured parameters: PAW; PEEP; Vte; ExpMV; Rate; I:E; FiO2, Pmax; Pmean; Pause; Vti; FLOWi; FLOWe; Tinsp; Tesp; Tpause; Cs; Ri
• Displayed ventilation curves: Paw, Flow, Volume, Loop (Volume/Paw ; Volume/Flow)
• Adjustable parameters: – O2 built-in Mixer device from 21% to 99% – I:E Adjustable Ratio: 1:1-1:2-1:3-1:4-2:1-3:1 – Inspiratory Flow – PEEP – Breathing Rate – Minute Volume; – Tidal Volume – Inspiratory Pressure Limit – Inspiratory Pause – Inspiratory Time – Trigger
• Mechanic flowmeter module: 3-flow mechanical flow meter (O2 – N2O – AIR) with 5 flow meters for low flows. Equipped with safety systems (MIX-LIFE, CUT-OFF, flow meter protection valve).
• Breathing system: The breathing system of Morpheus guarantees to the user an absolute flexibility and easy handling thanks to the noble construction materials employed. The valves group can be drawn-up and it’s totally autoclavable at 121°C and all its parts are manually dismountable, with no need of special tools.The breathing system is made of; Calibrated APL valve, Fresh gas collecting bag, O2 cell for reading of FiO2, Removable 1 kg soda lime canister, Manually inspectionable bellows jar, Safety valve for ambience air suction in case of fresh gas failure, Flow transducer inside the group located on the expiratory line.

Click Here To Download Catalogue

• State-of-the-art low-noise amplifier with 18-bit A/D converters and artifact-reduction software provides clean waveforms
• Built-in rejection ratios of 110 dB or greater (differential mode) and 112 dB or greater (isolation mode) limit variations in signals
• Electrode input impedance of 200 MΩ ±20% helps ensure clean signals
• On-screen examination guide directs electrode and stimulation placement for smooth and efficient examinations
• HL7^® gateway integration helps ensure quick flow of information and streamlines workflow
• Intuitive control panel and stimulators aid in acquiring and progressing through studies
• Customizable protocols shorten examination time
• One-click report generation produces print-ready reports with customized logos, test results, exam waveforms and highlighted abnormal values
• Proprietary all-in-one NCS program performs MCS, SCS and F-wave for quick examinations
• Customized auto-copy settings allow waveforms to be stored and automatically transferred to long-term storage

Click Here To Download Catalogue

• Brushed Steel Finish
• 3L capacities
• Gripped pedal
• Easy clean plastic bucket
• Lip for hiding excess bag