Contec CMS6600B Electromyogram (EMG) Machine

• Professional EMG/EP operation platform and perfect test items, complete each test in the shortest time.
• Neuro and muscle navigation system, convenient in selecting test part.
• Powerful normal values system, contrast with normal data automatically.
• Flexible software design, configure system parameters according to requirements.
• High-speed data collection, electromagnetic interference suppression, Photoelectric isolation and low noise.
• Integrative hardware system, compact in configuration and easy in moving.

• Main system part
• A/D conversion resolution 16 Bit
• Sampling ratio 200kHz
• Analysis time 5-5000ms
• Stimulating frequency 0.1-50Hz
• Amplifier part
• Four-channel
• Sensitivity 0.05μ V-20mV/Grid
• Earth noise EMG <= 4μ V(Vpp)
• EP <=0.1μ V(Vpp) (1000 times in average)
• Common-mode rejection ratio >= 100dB
• 50Hz Ban wave setting
• Upper limit for Filter-frequency 20kHz
• Lower limit for Filter-frequency 1Hz
• Gain amplifies 25 times-400000 times
• Stimulator part
• Constant current 0.2-100mA
• Pulse width 50-1000μ S
• Short circuit and overloading protection
• Auditory Stimulator
• Stimulation wave 40Hz Short, Sound Stim
• Stimulation polarity nondense wave, dense wave and alternant wave.
• Sound strength 40-120db (5db per level)
• Stimulation mode left, right, left & right
• Frequency of 40Hz carrier wave 500-8000Hz
• Visual stimulator
• Mode tessellation, horizontal bar and vertical bar.
• Stimulation view all-view, half-view and quarter-view
• Resolution 3x4, 6x8, 12x16, 24x32, 48x64
• Flash stimulator all quench, left light, right light, l&r light

• Disk
• Power Cord
• Power Adapter
• USB Cable
• Audio Cable
• Earth Cable
• Current Stimulator
• One-off Bipolar Needle Electrode D039035408, 0.35*40mm, D039060706, 0.60*70mm
• Reuseable Bipolar Needle Electrode R039035408, 0.35*40mm, R039060706, 0.60*70mm
• Concentric Needle Connecting Wire
• 1mm Connecting Lead Wire
• Disc Electrode
• Ring Electrode
• Surface Electrode
• Ground Electrode(Include lead cable)
• One-off Unipolar Needle Electrode
• From 1 to 2 Conversion Cable
• Surface Electrode Conversion Cable
• Fuse 0.1A/250V, 5*20mm
• Fuse F1.6AL250V, 5*20mm
• Flash Stimulator
• Audio Stimulator

• Dimension 420mm*350mm*46mm(L× W× H)
• Net weight 6KG

• Cooperation with the CardioTEST cardiovascular exercise system and AsTER cardiac rehabilitation system,
• Control using a computer through the RS-232 port,
• Braking: a processor-controlled brake with torque measurement,
• Load range: 25 - 1000 W,
• Speed ​​range: 20 - 150 rpm,
• Load independent of the number of turns,
• Built-in ECG module,
• 12 standard leads in diagnostic mode,
• 2 leads in training mode,
• Sensitivity 2,5 / 5/10/20 mm / mV,
• Shift 25/50/100 mm / s,
• Digital filters 25 Hz, 35 Hz, 50 Hz, anti-frit filter,
• Digital filter of the isoelectric line,
• Measuring range HR 15-240 bpm,
• Maximum patient weight 200 kg,
• Power supply: 230 V, 50 Hz, 60VA,
• Dimensions: (LxWxH) 1190x600x1370 mm.

• excellent quality of ECG waveforms thanks to the use of digital filters eliminating the swimming of the isoelectric line and disruption of muscle origin,
• uninterrupted recording and presentation of 12-lead ECG signal,
• presentation of averaged P-QRS-T units with 12 leads along with the results of ST level and slope measurements,
• automatic HR measurement, ST level and ST segment slope,
• automatic control of cycloergometer and treadmill load,
• archiving and printing of the research report,
• automatic determination of measuring points with the possibility of manual correction,
• automatic arrhythmia analysis,
• presentation of parameters regarding: test phase, current load, stage time and total effort time,
• monitored parameters: rhythm rate, MET, double product, blood pressure, level, ST segment slope and load,
• real-time ECG printout,
• preview of trends of all measured parameters during the test,
• alarm system for monitored parameters and arrhythmia,
• an option to automatically measure blood pressure,
• archiving and printing a report enabling a reliable assessment of the study (such an report contains ECG, average P-QRS-T assemblies and a table with measurement results),
• standard test protocols and the ability to define your own protocols also in RAMP mode,
• preview the report on the screen before printing the report,
• function of reanalysis of the performed test,
• presentation of 3D trends illustrating ST segment changes.

Click Here To Download Catalogue 

• fully compatible with Microsoft Windows environment
• unbeatable tool for alternative placement of electrodes
• independent analysis of the ST segment in all recorded channels, the positioning of all measurement points is user-reconfigurable and may depend on heart rate
• simultaneous arrhythmia detection in all three channels
• automatic signal calibration independent in all channels assures the use of all dynamic range available
• detection, reviewing and editing capability in the qualitative assessment of VE, VT, Single SVE, PSVT, Pauses, Irregular Rhythm, VT, IVR, Brady - and Tachycardia, Couplets, ST-segment elevation and depression, Maximum, Minimum and averaged Heart Rates, artifacts
• validation tool for beat classification making the correction easy and effective
• tabular hourly summaries all quantitative results
• printing of all recorded ECG signal available

• 12-channel digital registration of the ECG signal
• 10-lead patient cable
• registration time: 48 hours or 7 days on SD card
• built-in the real time clock
• EVENT button
• pacemaker detection
• dimensions: 72x76x23 mm

Click Here To Download Catalogue

Click Here To Download Catalogue

Click Here To Download Catalogue