Deionized Water Purifier

Brands: Scitek

~~$0.00~~

Shipped From Abroad

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Sku:

SF1033560130127-45

Brands:: Scitek

Description
Reviews (0)

Description

Deionized Water Purifier Features:

The deionized water filter has power indicator, pump work indicator, low pressure indicator and system flushing indicator functions.
Using imported ion filtration membranes and high-pressure, silent pure water pumps, the operation quality is more reliable and it is applicable to a wider range of water quality;
It has system flushing function: every time before turning on the water machine, it will automatically flush for 30 seconds and then the system will start to make water;
The water deionizer filter has system protection function: when the water pressure is too low or there is no water, the equipment automatically shuts down, and when the water source comes in, the equipment automatically turns on;
WP-DU series deionized water filter has an online water quality monitoring function, which can monitor the incoming water quality (located above the instrument, near the function detection area, indicated by a digital tube), RO water quality and temperature, and pure water quality and temperature in real time.

Deionized Water Purifier Specifications:

Model		WP-D20U	WP-D30U	WP-D40U	WP-D50U	WP-D60U
Water Output Speed		20L/h	30L/h	40L/h	50L/h	60L/h
Water Supply Requirement		Tap water: TDS<200ppm; Water pressure>0.1Mpa;
Water Supply Requirement		Water temperature: 5-45℃
Pure Water Quality	Conductivity	0.1us/cm (25℃)
	PH Value (25℃)	None
	Oxidizable (Calculated as O)	Technical requirements: ≦0.08mg/L;
	Oxidizable (Calculated as O)	Test results: ≦0.08mg/L
	Evaporation Residue (105±2℃)	Technical requirements: ≦1.0mg/L;
	Evaporation Residue (105±2℃)	Inspection results: 0.7mg/L
	Inspection Basis	GB/T6682-2008
Consumption		25W
Control System		Operation mode display: power, water shortage, flushing, full water, inlet water quality monitoring, RO water quality and temperature UP water quality and temperature, etc.
Safety Performance		Automatically enters standby state when there is no water or low water pressure, and enters standby state when the system is full of water (constant pressure).
Purification System		Pretreatment unit, external softening filter (recommended in places with high raw water hardness); 1μm deep PP filter element*2+precision activated carbon filter element
RO Reverse Osmosis Unit		American original RO reverse osmosis membrane/membrane group
Post Purification Unit		Purification column
Standard Accessories		Host + accessory package
Shipping Size (WxDxH)(mm)		533x435x550
N.W/G.W		23kg/25kg	28kg/30kg		33kg/35kg

Reviews

There are no reviews yet.

Be the first to review “Deionized Water Purifier”

Quick Comparison

Settings Deionized Water Purifier remove 8 Bucket Centrifuge remove Avalun LabPad Device remove Skyla Hi POC Clinical Chemistry Analyzer remove iSED Fully Automated ESR Analyzer remove Hawksley 1400 Haematocrit Centrifuge remove

Name Deionized Water Purifier remove 8 Bucket Centrifuge remove Avalun LabPad Device remove Skyla Hi POC Clinical Chemistry Analyzer remove iSED Fully Automated ESR Analyzer remove Hawksley 1400 Haematocrit Centrifuge remove

Image

SKU SF1033560130127-45 SF1033560084-114 SF1033560084-65 SF1033560060-2 SF1033560084-129 SF1033560084-118

Rating

Price

~~$0.00~~

$72.50

~~$0.00~~

$690.00

Stock

Availability

Add to cart

Description

Shipped From Abroad

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock

Classification: Laboratory Centrifuge

Brand Name: xiangtian

Model Number: 800-1

Place of Origin: Jiangsu, China

Time range: 0-60min

Max speed: 4000r/min

Max RCF: 1790xg

Capacity: 20ml*6

Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock The coagulometer, LabPad® INR, measures blood coagulation time thanks to a patented optical technology. This portable In-Vitro Diagnostics (IVD) device works with the Tsmart® INR single-use microcuvettes. Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped from Abroad The skyla Hi POC Clinical Chemistry Analyzer provides clinical testing laboratories of medical facilities and clinics with an in-vitro clinical chemistry diagnostic tool that is compact, portable, and reports rapid results.The use of skyla Hi in the management of diabetes enables better access to testing and rapid clinical decision making, discussion,and implementation of optimized treatment. Delivery & Availability: Typically 14 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock

The technical innovation of the iSED® fully-automated ESR analyzer consists of directly measuring the intensity of the red cell aggregation which is responsible for Erythrocyte Sedimentation Rate (ESR). Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock

The Hawksley Haematospin 1400 Centrifuges are built in the UK and are made from durable and high-quality components. These centrifuges are ideal for veterinary laboratories and practices specifically designed to produce reliable and accurate results on blood and urine. One of the main features of this centrifuge is that it takes both 2ml microtubes and 75mm microhaematocrits. The classic design of these centrifuges is used worldwide with guaranteed support for all servicing and parts. Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Content

Deionized Water Purifier Features:

The deionized water filter has power indicator, pump work indicator, low pressure indicator and system flushing indicator functions.
Using imported ion filtration membranes and high-pressure, silent pure water pumps, the operation quality is more reliable and it is applicable to a wider range of water quality;
It has system flushing function: every time before turning on the water machine, it will automatically flush for 30 seconds and then the system will start to make water;
The water deionizer filter has system protection function: when the water pressure is too low or there is no water, the equipment automatically shuts down, and when the water source comes in, the equipment automatically turns on;
WP-DU series deionized water filter has an online water quality monitoring function, which can monitor the incoming water quality (located above the instrument, near the function detection area, indicated by a digital tube), RO water quality and temperature, and pure water quality and temperature in real time.

Deionized Water Purifier Specifications:

Model		WP-D20U	WP-D30U	WP-D40U	WP-D50U	WP-D60U
Water Output Speed		20L/h	30L/h	40L/h	50L/h	60L/h
Water Supply Requirement		Tap water: TDS<200ppm; Water pressure>0.1Mpa;
Water Supply Requirement		Water temperature: 5-45℃
Pure Water Quality	Conductivity	0.1us/cm (25℃)
	PH Value (25℃)	None
	Oxidizable (Calculated as O)	Technical requirements: ≦0.08mg/L;
	Oxidizable (Calculated as O)	Test results: ≦0.08mg/L
	Evaporation Residue (105±2℃)	Technical requirements: ≦1.0mg/L;
	Evaporation Residue (105±2℃)	Inspection results: 0.7mg/L
	Inspection Basis	GB/T6682-2008
Consumption		25W
Control System		Operation mode display: power, water shortage, flushing, full water, inlet water quality monitoring, RO water quality and temperature UP water quality and temperature, etc.
Safety Performance		Automatically enters standby state when there is no water or low water pressure, and enters standby state when the system is full of water (constant pressure).
Purification System		Pretreatment unit, external softening filter (recommended in places with high raw water hardness); 1μm deep PP filter element*2+precision activated carbon filter element
RO Reverse Osmosis Unit		American original RO reverse osmosis membrane/membrane group
Post Purification Unit		Purification column
Standard Accessories		Host + accessory package
Shipping Size (WxDxH)(mm)		533x435x550
N.W/G.W		23kg/25kg	28kg/30kg		33kg/35kg

800-1 electric centrifuge is widely used in hospitals, chemical and Biological Chemistry Laboratory for serum, plasma, immune qualitative analysis experiment. Has beautiful shape, large capacity, small volume, complete function. Its performance is stable, the speed is adjustable and can automatically adjust the balance, low temperature, high efficiency and wide applicability and advantages. Technical Specifications:

Type No.	800-1
Power source	220V 50HZ 110V 60HZ
Speed Range （rpm）	0～4000（rpm）
Time Range(min)	0-60min
Capacity （ml）	20（ml）×6
Maximum centrifugal force(xg)	1790（xg）
Package Size （cm）	292926

Click Here To Download Catalogue

The coagulometer, LabPad® INR, measures blood coagulation time thanks to a patented optical technology. This portable In-Vitro Diagnostics (IVD) device works with the Tsmart® INR single-use microcuvettes.

User-friendly: the LabPad® INR is designed to be easy to use especially thanks to its 3D-shaped microcuvette that only requires a small drop of blood from a fingertip. Thanks to the color screen, both measurement steps and browsing the list of results are easy to visualize.

Quick and reliable: the reliability of INR results is obtained by quality controls that are performed automatically before each measurement. In less than one minute, you can see if you are in your therapeutic range.

Connected: the result obtained after performing the test can be transferred to healthcare professionals in charge of your treatment monitoring. This result is complementary to the pie charts and trend reports directly displayed on the LabPad® INR to help you monitoring your treatment

Click Here To Download Catalogue

skyla Hi Analyzer enables better access to testing and rapid clinical decision making, discussion, and implementation of optimized treatment. To get the result, only prepare <1 μl fingertips blood or venous blood (depends on test item) without pretreatment with easy steps and then read the result after 6 mins. The device allows two specimens be tested in one run and provides fully automatic procedures from checking the validity of cartridge to printing the results. Reagent Kit

HbA1C
CRP
Lipid Panel (TC,TG, HDL, LDL#)
Lipid Plus Panel (Glu,TC,TG, HDL, LDL#)

Main Specification

Principle

Turbidimetric Method / Biochemistry

Device

Testing Time

5~20 minutes (depends on test items)

Display and Interface

5″ TFT color touch screen LCD

Memory Capacity

50,000 test results

Dimension of Analyzer

270 x 188 x 148 mm

Weight of Analyzer

1.7 kg

Dimension of Printer Module

134 x 100 x 82.7 mm

Weight of Printer Module

0.37 kg

Power Supply

100~240 volts AC, 50-60Hz

Data Transmission

USB 2.0*4 / USB 3.0*1 / RS232*1 / RJ45*1 / Wi-Fi (optional)

Reagent and Samples

Samples

Fingertips blood or venous blood

Samples Volume

0.8 ~ 30 μL (depends on test item)

Storage Temperature (Reagent)

2 ~ 8˚C

Humidity

Relative humidity < 95% (Non-condensing)

Temperature

10 ~ 32 ˚C

Click Here To Download Catalogue

The technical innovation of the iSED® fully-automated ESR analyzer consists of directly measuring the intensity of the red cell aggregation which is responsible for Erythrocyte Sedimentation Rate (ESR). Unlike traditional ESR methodologies that measure the aggregation of the red blood cells indirectly, the iSED measures it directly and expresses the values in mm/hr. Features:

Results in 20 Seconds
100µL sample drawn directly from primary EDTA tube
Fully automated, walk-away operation
Random access
Positive patient identification via internal barcode reader
Compatible with pediatric tube

Technical Specifications:

Principle of Measure:	Photometrical
Results:	“Printed mm/hr, Range from 1-130 mm/hr”
Sample Requirements:	500uL whole blood, collected in EDTA anti-coagulant tested 24 hours from venipuncture at room temperature or refrigerated.
Tube Requirements:	13 x 75 mm, pierceable capped tube
Quality Control:	Barcoded Seditrol® QC
Barcode Reader:	Internal
Printer:	Internal
Interface Specifications:	serial RS232 port for LIS connection
Weight:	14 kg
Dimensions (H x W x D):	36 x 27 x 34 (cm) /14.3 x 10.5 x13.4 (in)
Voltage:	100-240VAC
Frequency Range:	50-60 Hz
Power:	160W

Click Here To Download Catalogue

Speed: 11,800rpm with 24- place rotor
RCF: 14,000g with 24-place rotor
Acceleration: 0-11,800rpm in 60 seconds, with 24-place rotor
Brake: Automatic
Noise: 62dB running with 24-place rotor
Motor: High precision AC/DC series wound motor, brush gear, computer wound coil winding, balance armature and high speed bearings.
Timer: 0-15 minute timer, graduated in 1 minute increments. Automatic switch at zero
Weight: 5.1Kg net (without rotor)
Dimensions: 23.5cm height x 27cm diameter, footprint 16cm diameter
Construction: Aluminium casing with a steel lid
Finish: Body cream white baked enamel, with matt black baked enamel lid