Horizontal Pulse Vacuum Autoclave, Motor Hinge Door

Advantages of Horizontal  Pulse Vacuum Autoclave:

1. Intelligent maintenance system: Horizontal pulse vacuum autoclave is equipped with MNcold Internet of Things remote monitoring and maintenance module, it can connect to computers, tablets, or smartphones to access real-time information of the equipment, including real-time and historical operational data, fault troubleshooting notifications, and remote software upgrades. It has sterilization programs for fabrics, instruments, lumen instruments, rubber, liquids, custom programs, as well as testing programs such as BD testing and vacuum leak testing.
2. Pulsation modes: Horizontal pulse vacuum autoclave adopts negative pressure pulsation, cross-pressure pulsation, and positive pressure pulsation modes, with an air elimination rate greater than 99.99%. This saves steam consumption and improves steam sterilization and drying efficiency.
3. Flash steam vacuum drying technology, with fabric drying degree less than 0.6% and instrument drying degree less than 0.1%.
4. Real-time printing of process data through the built-in printer, equipped with paperless recorders for pharmaceutical customers.
5. Pipeline system: Stainless steel sanitary-grade pipelines with clamp connections. All welds are done using automatic pipe welding machines. The main control valves are imported German angle seat valves and solenoid valves, with a German SPECK direct-coupled water ring vacuum pump.
6. Supply system detection and alarm system: Equipped with steam, water source, and power phase sequence detection and alarm devices. If the supply system fails to meet the equipment's operating conditions, it will automatically sound an alarm and prevent program startup and termination.
7. It has an automatic drainage temperature regulation system, with a drainage temperature below 60℃.

Horizontal Pulse Vacuum Autoclave Features:

1. Sliding door with detachable gear meshing seal structure, driven by motor chain to lift the door up and down.
2. Double door passage type, equipped with pressure safety interlock and temperature safety interlock for liquid programs, with mutual interlocking of the double doors.
3. The automatic sealing is achieved by the inflatable pressure-driven sealing ring. The new high-quality tear-resistant silicone rubber material circular hollow door sealing ring is coated with a special surface treatment, which is wear-resistant and smooth, providing better sealing effect and longer service life, with a lifespan of up to 1500 cycles.
4. The main body structure is rectangular in section, with a European-style circular reinforcement rib sleeve flangeless structure, and the sealing groove is directly welded to the two end circular sleeves.
5. Control system: Siemens programmable logic controller (PLC) and color touch screen, the entire process is automatically controlled by the program, automatically displaying the operation status, operation curve, and parameters such as temperature, pressure, and time.

• PBT-6 is a 4 way Motorized Tabletop with Elevating feature (66cm). A large tabletop with extended travel enables all radiography studies with minimal patient movement. Fully fat tabletop without a frame on the edge makes cleanliness and odors free
• Automatic Stitching - GXR-SD system provides outstanding automatic stitching function with Source tilting method
• Digital Flat Panel Detector (FPD) – Wireless 17X14 (Csl, 4336W) with Auto Exposure Detection (AED) function, there is no DR trigger cable between detector and generator.
• Full Featured Imaging Software & Excellent Digital Image Processing:

1. Provides convenient user interface and easy operation
2. Anatomical view-based digital image processing automatically optimizes and enhances the quality of the captured image for the pictured anatomy.
3. Radiographic stand & automatic collimator control function
4. DICOM 3.0 networking interface includes Worklist, Print, Store, Query for integration with any PACS or RIS

• Included – Software, HP Laptop Computer

1. CPU≥3.2GHz
2. Memory capacity：≥4GB
3. Hard drive capacity ：≥500 GB
4. Resolution: 1280 x 1024
5. Display size： 21 inch color LCD screen
6. 64 bit Windows 10 operation system
7. Core: i5

• Power Rating - 32KW
• Generator - GXR-32S
• Rotor - Dual Speed Starter(DSS)
• Input Power - 400/480VAC, Three phase
• Line Frequency - 50/60Hz
• X-ray tube - DXT-12M, (0.6/1.2mm, 300kHU)
• Tube Voltage - 40 to 150kV, 1kV Step
• Tube Current – 10 to 640mA
• Output - 640mA@81kV,  500mA@104kV, 400mA@130kV, 320mA@150kV
• Time Range - 1ms to 10s
• mAs Range - 0.1 to 800mAs
• Reproducibility - Coe­cient of Variation : kV < 0.005, Time < 0.005,mAs < 0.01
• Accuracy - kV < ±(1%+1kV), mA < ±(3%+1mA), Time <±(1%+0.5ms), mAs < ±(3%+0.1mAs)
• Linearity - Coe­cient of Linearity < 0.01 : CL = (X1-X2)/(X1+X2), where X is mR/mAs

Click Here To Download Catalogue

• Vehicle loadable
• Wheel lock
• Automatic tube arm lock at any angle
• Storage space for cassettes or detectors
• User Programmable APR, save up to 9 APR settings
• Three way X-ray exposure
• USB interface & Bluetooth
• Remote control (Option)
• 5kg including X-ray unit, collimator and stand
• Maximum hight of 228.6cm
• Exposure Hand Switch
• Foldable, two-step stand

• Power Rating - 4kW,
• 100kHz, high frequency X-ray Generator
• kVp Range - Maximum 140kVp
• mAs Range - 0.1-250mAs
• mA Range – 10 to 100mA
• 330~2000mm FD
• Collimator with 30 seconds LED lamp timer

Click Here To Download Catalogue

• fully compatible with Microsoft Windows environment
• unbeatable tool for alternative placement of electrodes
• independent analysis of the ST segment in all recorded channels, the positioning of all measurement points is user-reconfigurable and may depend on heart rate
• simultaneous arrhythmia detection in all three channels
• automatic signal calibration independent in all channels assures the use of all dynamic range available
• detection, reviewing and editing capability in the qualitative assessment of VE, VT, Single SVE, PSVT, Pauses, Irregular Rhythm, VT, IVR, Brady - and Tachycardia, Couplets, ST-segment elevation and depression, Maximum, Minimum and averaged Heart Rates, artifacts
• validation tool for beat classification making the correction easy and effective
• tabular hourly summaries all quantitative results
• printing of all recorded ECG signal available

• 12-channel digital registration of the ECG signal
• 10-lead patient cable
• registration time: 48 hours or 7 days on SD card
• built-in the real time clock
• EVENT button
• pacemaker detection
• dimensions: 72x76x23 mm

Click Here To Download Catalogue

• Simultaneous registration and observation of ECG signal from all 12 leads on PC screen,
• Automatic measurement of HR, ST level and slope,
• Printing and archiving examination report which contains: patient's data, the full disclosure ECG of the whole recording, selected strips, average P-QRS-T complexes, table summary, load value, HR, ST level and slope,
• RAMP protocol
• PMHR control
• Digital filtration of mains disturbances
• Digital filtration of muscle origin disturbances
• Resting examination: 12, 6 or 3-channel in manual or automatic mode
• Automatic regulation of isoelectric line position in the middle of registration channel
• Automatic elimination of isoelectric line migration

• excellent quality of ECG waveforms thanks to the use of digital filters eliminating the swimming of the isoelectric line and disruption of muscle origin,
• uninterrupted recording and presentation of 12-lead ECG signal, presentation of averaged P-QRS-T units with 12 leads along with the results of ST level and slope measurements,
• automatic HR measurement, ST level and ST segment slope,

• automatic control of cycloergometer and treadmill load,
• archiving and printing of the research report,
• automatic determination of measuring points with the possibility of manual correction,
• automatic arrhythmia analysis,
• presentation of parameters regarding: test phase, current load, stage time and total effort time,
• monitored parameters: rhythm rate, MET, double product, blood pressure, level, ST segment slope and load,
• real-time ECG printout,
• preview of trends of all measured parameters during the test,
• alarm system for monitored parameters and arrhythmia,
• an option to automatically measure blood pressure,
• archiving and printing a report enabling a reliable assessment of the study (such an report contains ECG, average P-QRS-T assemblies and a table with measurement results),
• standard test protocols and the ability to define your own protocols also in RAMP mode,
• preview the report on the screen before printing the report,
• function of reanalysis of the performed test,
• presentation of 3D trends illustrating ST segment changes.

Click Here To Download Catalogue

Sonoscape S8 Exp Portable Ultrasound scanner

Click Here To Download Catalogue