SV-Multisensor2_01

Health Education / Medical Equipment

OXYGEN & CARBON DIOXIDE MONITOR

Brands: Analox

~~$0.00~~

Shipped From Abroad

Key Features

Operating temperature 0 °C to 40 °C (32 °F to 104 °F)
Dual state-of-the-art oxygen and carbon dioxide sensors
Two analogue outputs, one for each gas detected
Maximum power consumption less than 5 watts
Designed to operate safely in a vacuum for four hours

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Sku:

SF1033560130141-12

Brands:: Analox

Description
Reviews (0)

Description

Description

The SV-Multigas-2 is a dual oxygen (O2) and carbon dioxide (CO2) monitor designed for vehicles operating in the upper atmosphere. Housed in a robust, compact enclosure, the unit is ideal for use in airborne delivery systems, satellites and aircraft cabins. Since 2014 the SV-Multigas-2 has been successfully used in rockets travelling to outer space.

Flexibility

The SV-Multigas-2 incorporates user maintainable analogue sensors that provide a 1 to 5 V output. This modular approach to gas monitoring ensures that our customers have the flexibility to integrate the unit into their own system. It can be either installed directly in the gas path or used for general air monitoring.

Technical Specification

SV-Multigas-2

Operating temperature range	32 to 104 °F / 0 to 40 °C
Storage temperature range	−4 to 140 °F / −20 to 60 °C
Operating pressure range	8.7 to 17.4 psia / 600 mbar to 1200 mbara
Vacuum tolerance	normal operation of the SV-Multigas-2 will not be affected by 4 hour exposure to vacuum
Electrical supply	18 to 36 V DC, 100 mV ripple maximum
Power consumption	5 W maximum
2 analogue outputs are provided, one for each gas	Zero output: 1.0 V, full-scale output: 5.0 V, warm-up/fault output: 0.25 V Outputs are isolated from the incoming power supply and from each other

O2 SENSOR

Range	0 to 5.80 psi pO2 / 0 to 400 mbar
Repeatability @ 14.5 psia, 70 °F / 1000 mbara, 21 °C	± 0.116 psi pO2 / ± 8 mbar

CO2 SENSOR

Range	0 to 0.14 psi pCO2 / 0 to 10 mbar
Repeatability @ 14.5 psia, 70 °F / 1000 mbara, 21 °C	±(0.0014 psi pCO2 + 1.1% of reading) / ±(0.1 mbar + 1.1% of reading)

Click here to download Data Sheet

Reviews

There are no reviews yet.

Be the first to review “OXYGEN & CARBON DIOXIDE MONITOR”

Quick Comparison

OXYGEN & CARBON DIOXIDE MONITOR remove Ax60+ Kiosk remove CARBON MONOXIDE MONITORING SYSTEM (AX60+ CO) remove Pilot-RO Water Purification System remove Full Touch Screen Water Purification System remove VENUS SOLO OEM SENSOR remove

Name OXYGEN & CARBON DIOXIDE MONITOR remove Ax60+ Kiosk remove CARBON MONOXIDE MONITORING SYSTEM (AX60+ CO) remove Pilot-RO Water Purification System remove Full Touch Screen Water Purification System remove VENUS SOLO OEM SENSOR remove

Image

SKU SF1033560130141-12 SF1033560130141-6 SF1033560130141-1 SF1033560130126-2 SF1033560130126-4 SF1033560130141-15

Rating

Price

~~$0.00~~

~~$0.00~~

~~$0.00~~

~~$0.00~~

~~$0.00~~

~~$0.00~~

Stock

Availability

Add to cart

Description

Shipped From Abroad

Key Features

Operating temperature 0 °C to 40 °C (32 °F to 104 °F)
Dual state-of-the-art oxygen and carbon dioxide sensors
Two analogue outputs, one for each gas detected
Maximum power consumption less than 5 watts
Designed to operate safely in a vacuum for four hours

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad

Key Features

Low maintenance
Quick Connect System
Pre-wired, ready to go
Can support up to 4 alarm units
Push button for unit testing

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad

The Ax60+ CO protects users in plant rooms, parking garages and anywhere that carbon monoxide can collect. The Ax60+ CO also can be used for online cylinder filling, to protect divers from compressed air contaminated with carbon monoxide related to compressor maintenance or contamination at the compressor inlet.

The Ax60+ CO benefits from the ability to operate as a single sensor and alarm or as part of a system of up to 4 sensors. Each system can also be composed of Ax60+: O2 sensors and Ax60+ CO2 sensors so it can fulfil multiple application needs.

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad An economical choice of primary pure water for daily laboratory cleaning , with a water output of 45 - 180 liters per hour, ion retention rate >98%, organic matter retention rate >99% (when MW >200 Daltons), particle and bacteria retention rate >99%, which can meet the requirements of conventional production process water and laboratory utensil cleaning water, and can be used as the inlet water for ultrapure water systems, high-pressure steam sterilizers, environmental test chambers and other instruments.

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad The Center series uses city tap water as the water source, conveniently and quickly produces secondary RO reverse osmosis water, DI/EDI deionized water and UP ultrapure water. It adopts standard two-stage reverse osmosis system and EDI technology and modules*, and continuously produces Class II pure water with a TOC of more than 10MΩ.cm (25℃) and less than 30ppb*, and ultrapure water of 18.2MΩ.cm (25℃).There are currently four sub-product series of Center (Center-EDI) pure water and ultrapure water, and the system water output is: 45, 60, and 90 liters/hour.

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad

Key Features

Single gas (user defined)
Backward compatible with ADC’s ‘Eclipse’
Linearised Output
Continuous status signal to check device health

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Content

Description

The SV-Multigas-2 is a dual oxygen (O2) and carbon dioxide (CO2) monitor designed for vehicles operating in the upper atmosphere. Housed in a robust, compact enclosure, the unit is ideal for use in airborne delivery systems, satellites and aircraft cabins. Since 2014 the SV-Multigas-2 has been successfully used in rockets travelling to outer space. Flexibility The SV-Multigas-2 incorporates user maintainable analogue sensors that provide a 1 to 5 V output. This modular approach to gas monitoring ensures that our customers have the flexibility to integrate the unit into their own system. It can be either installed directly in the gas path or used for general air monitoring.

Technical Specification

SV-Multigas-2

Operating temperature range	32 to 104 °F / 0 to 40 °C
Storage temperature range	−4 to 140 °F / −20 to 60 °C
Operating pressure range	8.7 to 17.4 psia / 600 mbar to 1200 mbara
Vacuum tolerance	normal operation of the SV-Multigas-2 will not be affected by 4 hour exposure to vacuum
Electrical supply	18 to 36 V DC, 100 mV ripple maximum
Power consumption	5 W maximum
2 analogue outputs are provided, one for each gas	Zero output: 1.0 V, full-scale output: 5.0 V, warm-up/fault output: 0.25 V Outputs are isolated from the incoming power supply and from each other

O2 SENSOR

Range	0 to 5.80 psi pO2 / 0 to 400 mbar
Repeatability @ 14.5 psia, 70 °F / 1000 mbara, 21 °C	± 0.116 psi pO2 / ± 8 mbar

CO2 SENSOR

Range	0 to 0.14 psi pCO2 / 0 to 10 mbar
Repeatability @ 14.5 psia, 70 °F / 1000 mbara, 21 °C	±(0.0014 psi pCO2 + 1.1% of reading) / ±(0.1 mbar + 1.1% of reading)

Click here to download Data Sheet

CO2 MONITOR & ALARM DESIGNED FOR KIOSKS

The Ax60+ Kiosk is a CO2 monitor and alarm specifically designed by Analox to alert personnel to a build up/leak of CO2 using a state-of-the-art infrared sensor. The alarm provides both audio and visual alerts in the case of increased levels of carbon dioxide (CO2). Up to four alarms can be added as needed and the unit does not need periodic calibration.

CO2 monitoring with the AX60+ Kiosk

The Ax60+ Kiosk is a smaller version of the popular Ax60+ carbon dioxide (CO2) monitor. It is simple to wall mount in the area where carbon dioxide (CO2) is stored or piped. The Ax60+ Kiosk sensor needs to be installed at a height of 12-18 inches (305-457mm) above the floor – this is because the carbon dioxide (CO₂) that leaks from a gas cylinder is denser than ambient air and can collect at low levels. The alarm should be located above the sensor at about head height or at the entrance to the kiosk.

Technical Specification

Sensor Unit


Gas detected	Carbon Dioxide (CO2)
Sensor technology	Infrared
Range	0.1% to 5%
Default alarm set-points	USA regulations (NFPA 55, IFC, NBIC, OSHA and NIOSH): TWA - 5,000ppm (0.5%) AL1 - 5,000ppm (0.5%) AL2 - 15,000ppm (1.5%) AL3 - 30,000ppm (3%) International/European regulations (EH40) (DIN 6653-2:2015-06 compliant, assessed by TUV): TWA - 5,000ppm (0.5%) AL1 - 15,000ppm (1.5%) CO2 - 30,000ppm (3%)
Warm up time	40 Seconds
Resolution	0.01%
Accuracy	±2.5% of the alarm levels
Response Time	30 seconds to T90
IP Rating	IP55
LED indicators	Green = Power

Alarm Unit


Strobe	White LED strobe, with an option to change to blue, red or amber filter.
Sounder	min 80 dBA @3 m (9.8 feet)
IP Rating	IP55
LED indicators	Green = Power, Amber = Fault
Cable	2m included

https://youtu.be/--wsZFTYVWs?si=nI8q1AThpkBD4yNv https://youtu.be/Bi7CmSLIIbA?si=dVXlyZaRw893no_T

Key Features

Ambient CO monitoring
Online CO monitoring
Can be used with Nitrogen (N2) background gasses or, with calibration, can be used with Helium (He) background gasses
Has up to 3 user configurable alarms
Can operate as a stand alone sensor or as part of a larger system
Compatible with the rest of the Ax60+ range

Click here to download Quick Start Guide

Click here to download Manual

Click here to download Service Manual

An economical choice of primary pure water for daily laboratory cleaning , with a water output of 45 - 180 liters per hour, ion retention rate >98%, organic matter retention rate >99% (when MW >200 Daltons), particle and bacteria retention rate >99%, which can meet the requirements of conventional production process water and laboratory utensil cleaning water, and can be used as the inlet water for ultrapure water systems, high-pressure steam sterilizers, environmental test chambers and other instruments

Technical Parameters

Product Model	Pilot-RO45	Pilot-RO63	Pilot-RO90	Pilot-RO120	Pilot-RO180
Pure water output*	45L/Hour	63L/Hour	90L/Hour	120L/Hour	180L/Hour
RO reverse osmosis water indicators
Ion retention rate	98%-99% (when using new RO membrane)
Organic matter retention rate	>99%, when MW>200 Daltons
Particle and bacteria retention	>99%
bacteria	<0.01 cfu/ml (optional 0.2μm imported PES terminal filter)
Particles (>0.2μm)	<1/ml (optional (0.2μm imported PES terminal filter)
Raw water requirements	Urban drinking tap water, water temperature 5-45℃, water pressure 1.0-4.0Kgf/ ^cm2
Size and weight	Length × width × height: 640 × 540 × 1110mm; Weight: about 70Kg
Electrical requirements	220V, 50/Hz
power	120W	120W	240W	240W	240W
System Configuration	Main unit (including 1 set of purification column) + 2 built-in 15L pressure water buckets + TDS/conductivity test pen + accessory bag

Performance characteristics

New 7.0-inch color touch screen

Animated menu, system information at a glance, and a new fingertip touch operation experience.

The lab optimized standard two-stage reverse osmosis system

The use of dual pumps, dual membranes and transition water tanks reduces system energy consumption, reduces wastewater and produces more stable water quality.

Advanced EDI technology and modules

Providing you with consistent 10MΩ.cm grade high purity water at an optimized operating cost.

Removable water tray

Prevent water droplets from splashing, store water in time, facilitate cleaning, and keep the system clean.

Built-in double water tank

Built-in 20L PE water tank and 1 20L pressure water bucket, saving more experimental space and eliminating the inconvenience of external water bucket.

Features and Advantages

The ultrapure water circulation system can be started and shut down freely to maintain the low bacterial contamination level of the system
Ultrapure water full pipeline disinfection program, can manually execute "circulation disinfection", "water inlet disinfection", "water tank filling", "manual sewage discharge", "stop disinfection"
Fully automatic RO membrane anti-scaling flushing (flushing interval and duration can be set) and manual forced flushing program to extend the service life of the RO membrane
The life of PP, KDF, AC, RO, UP, UF, TF, and UV consumables can be set, and the used time can be displayed, and automatic replacement reminders will be given when the time expires.
Water shortage and water full alarm, source water, RO reverse osmosis water, DI deionized water/UP ultrapure water exceeding the standard alarm
Compatible with two pure water storage methods: pressure water bucket and liquid level water tank, which can directly display the water storage capacity of the water tank to meet different application needs
System time setting (year/month/day/hour/minute), timed standby (0~60min), timed shutdown (0~24hour) functions
Record and check the replacement time of consumables at any time to fully grasp the equipment maintenance information
Complete information query and data management functions, fully control system operation status, water quality, consumables usage, timely alarm, historical alarm and other information
The entire pipeline adopts quick plug-in interface, and all pipes and joints are NSF certified
DOW RO reverse osmosis membrane ensures stable operation and high desalination rate
DOW's high-purity nuclear-grade resin ensures that the water produced reaches 18.2MΩ.cm and reduces TOC precipitation
Ultra-long life 254 & 185nm dual wavelength UV lamp, effective sterilization, reducing TOC
MWCO 5000D UF ultrafiltration module, effectively removes endotoxins/pyrogens
0.2μm PES polyethersulfone composite membrane terminal filter to ensure pure water quality

Description

The Venus Solo OEM sensor is a self-contained unit designed for integration into other manufacturers’ equipment and provides a measurement of gas concentration according to specific user requirements. These GFC (Gas Filter Correlation) sensors generate a signal proportional to the infrared absorption of the measured gas. Providing the gas concentration lies within the designed range of the sensor, the signal is periodically compared with a reference gas. Gas concentrations are indicated through the non-linearised analogue signal output. Gas connections to and from the sensor are via suitable fittings on the gas measuring cell. The Venus Solo OEM Series sensors electrical supply is designed to accept 24V DC (3amp max). Our Venus Solo OEM sensor uses GFC (Gas Filter Correlation) technology to give highly accurate gas measurements. The Venus Solo can be integrated into your own gas analyzer or management system and offers the user a 0-2.5v analogue output.

The sensor is currently available as either: Carbon dioxide (CO2), carbon monoxide (CO), nitrous oxide (N20), methane (CH4) or nitric oxide (NO). If your application requires a different gas, just let us know and we can customise it to your needs. The Venus Solo is used in Military applications to protect submariners from carbon monoxide (CO) exposure.

Technical Specification

Venus Solo

Operating Temperature Range	5°C to 40°C
Ambient Humidity	0 to 95% RH, non condensing
System Warm-up Time	30-60 minutes (dependant on gas)
Power Requirements	24V DC +/- 10%, Max current 3A, Nominal current 600mA (after warm up)
Outputs	4-20mA, RS232, relays
Response Time (T90)	Between 10-90 secs (dependant upon gas cell length) at flow rate of 500ml/minute
Intrinsic Accuracy	+/- 0.2% of full scale
Sensor Technology	Gas Filter Correlation

Gas PPM Ranges

Gas Type	10 PPM	20 PPM	50 PPM	100 PPM	200 PPM	500 PPM	1000 PPM	2000 PPM	5000 PPM
Carbon Dioxide (CO2)	✓		✓	✓		✓	✓		✓
Carbon Monoxide (CO)		✓		✓	✓	✓	✓		✓
Methane (CH4)				✓	✓	✓	✓		✓
Nitrous Oxide (N20)	✓		✓	✓	✓	✓	✓		✓

Gas % Ranges

Gas Type	1%	5%	10%	20%	50%	100%
Carbon Dioxide (CO2)	✓	✓	✓		✓	✓
Carbon Monoxide (CO)	✓	✓	✓		✓	✓
Methane (CH4)	✓	✓	✓	✓	✓	✓
Nitrous Oxide (N20)	✓	✓	✓	✓	✓	✓

Click here to download Data Sheet

Click here to download Operational Manual

Weight N/A N/A N/A N/A N/A N/A

Dimensions N/A N/A N/A N/A N/A N/A

Additional information

Click outside to hide the comparison bar

Compare