PERSONAL CO2/O2 MONITOR-ASPIDA

Brands: Analox

Ask for Price~~$0.00~~

Shipped From Abroad

Key Features

IP65 rated, ensuring the unit is dust tight and protected against water
Data logging capability
Man down alarm
Time Weighted Average (TWA) monitoring
Rechargeable batteries
Intelligent software – up to 2 users registered to one unit
User changeable alarms
We recommend: 23.5% for oxygen (O2) enrichment (As per NHS SOPS/EH40/OSHA); 19.5% for oxygen (O2) deficiency 0.5%; & 1.5% for carbon dioxide (CO2) enrichment

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Sku:

SF1033560130141-11

Brands:: Analox

Description
Reviews (0)

Description

The Aspida is a robust, high specification personal oxygen (O2), carbon dioxide (CO2) or dual (O2 / CO2 combined) monitor which can be worn on a belt or even wall mounted as a backup to a primary safety system.

The Aspida, (Greek for Shield) helps you comply with the regulations, will remind you when maintenance is needed and it safeguards the user from the gas risks.

Technical Specification

Aspida

Operating temperature	-5°C to +50°C
Humidity Range	0 to 99% RH
Display	High-visibility, Organic Light Emitting Diode (OLED) display
Alarm horn	95dB @ 30cm (110dB – man-down alarm)
LED indicators	1 x Green – OK, 1 x Amber – Fault, 1 x Red – Alarm
Internal data log	1 log every 30 seconds for at least 7 days of continuous use
Batteries	2 x NiMH 2100mAh AA batteries (or suitable AA type batteries)
Battery discharge time	15 hours under normal operation (passive atmospheric monitoring, minimal user interaction, no alarms)
Battery lifespan	2 years
Battery charge time	4.5 hours (from flat)
Charge power supply rating	9 V DC – 0.55A
Dimensions	127 x 44 x 90 mm / 5 x 1.7 x 3.5 inches (HxDxW)
Electronics warranty	2 years
IP rating	IP65

Aspida Sensors

CO2 Sensor	O2 Sensor
Sensor type	Analox infrared MIR	Electrochemical
Range	0.01 to 5%	0.1 to 25%
Accuracy (at standard temperature and pressure)	±2% of full scale between 0.01% and 2.5%, ±3%	±3% of full scale between 0.1% and 25%
Response time	T90 <60 seconds	T90 <30 seconds
Sensor life span	5 years	2 year (expected)

Characteristics

Personal Protection

Enriched oxygen (O2) can cause a condition on the human body called hyperoxia, enriched CO2 is highly toxic, both are a threat to life and must be safeguarded against.
If an inert gas such as nitrogen (N2), argon (Ar), helium (He) or liquid nitrogen (LN2) leaks then this will deplete the levels of oxygen (O2) in the surrounding area, creating a dangerous atmosphere.

The Aspida can offer personal protection and alerts to all of these risks, offering you true peace of mind.

Ideal Solution

The Aspida is an affordable, easy to operate gas detection monitor and is perfect for ensuring safety in areas where the gas is piped, used or stored.

It operates using rechargeable battery technology allowing it to run for more than 12 hours continuously between charges.

Click here to download User Manual

Click here to download Data Sheet

Download Aspida Software

Reviews

There are no reviews yet.

Be the first to review “PERSONAL CO2/O2 MONITOR-ASPIDA”

Quick Comparison

PERSONAL CO2/O2 MONITOR-ASPIDA remove Ax60+ Kiosk remove PARTIAL PRESSURE O2 ANALYSER remove Smart-RO Water Purification System remove Sonoscape P10 Ultrasound Machine remove Sonoscape P15 Ultrasound Machine With Four Probes remove

Name PERSONAL CO2/O2 MONITOR-ASPIDA remove Ax60+ Kiosk remove PARTIAL PRESSURE O2 ANALYSER remove Smart-RO Water Purification System remove Sonoscape P10 Ultrasound Machine remove Sonoscape P15 Ultrasound Machine With Four Probes remove

Image

SKU SF1033560130141-11 SF1033560130141-6 SF1033560130141-19 SF1033560130126-1 SF1033560012-7 SF1033560012-8

Rating

Price

Ask for Price~~$0.00~~

$13,900.00

Stock

Availability

Add to cart

Add to basket

Description

Shipped From Abroad

Key Features

IP65 rated, ensuring the unit is dust tight and protected against water
Data logging capability
Man down alarm
Time Weighted Average (TWA) monitoring
Rechargeable batteries
Intelligent software – up to 2 users registered to one unit
User changeable alarms
We recommend: 23.5% for oxygen (O2) enrichment (As per NHS SOPS/EH40/OSHA); 19.5% for oxygen (O2) deficiency 0.5%; & 1.5% for carbon dioxide (CO2) enrichment

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad

Key Features

Low maintenance
Quick Connect System
Pre-wired, ready to go
Can support up to 4 alarm units
Push button for unit testing

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad

Key Features

Compact in size making it ideal for confined space use
Fitted with a reliable PPO2 sensor, proven and tested within the hyperbaric environment
Large LCD display making readings easy to view

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad An economical choice of primary pure water for daily laboratory cleaning, with an hourly water output of 15-30 liters, ion retention rate >97%, organic matter retention rate >99% (when MW >200 Daltons), particle and bacteria retention rate >99%, which can meet the water requirements for routine laboratory ware cleaning and can be used as the inlet water for ultrapure water systems, high-pressure steam sterilizers, environmental test chambers and other instruments.

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped from Abroad The P10 color Doppler ultrasound system is a new generation product from SonoScape. It is designed to give high quality images, rich probe configurations, various clinical tools and automatic analysis software to provide you with comprehensive solutions for your growing demand for clinical applications. Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In Stock A feature-rich system inheriting the Wi-Sono high-end platform, the P15 uses an array of advanced tools to help enhance the image quality. It's a cost-effective, simplified console with an intuitive user interface and multiple intelligent functions. Delivery & Availability: Typically 2 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Content

The Aspida, (Greek for Shield) helps you comply with the regulations, will remind you when maintenance is needed and it safeguards the user from the gas risks.

Technical Specification

Aspida

Operating temperature	-5°C to +50°C
Humidity Range	0 to 99% RH
Display	High-visibility, Organic Light Emitting Diode (OLED) display
Alarm horn	95dB @ 30cm (110dB - man-down alarm)
LED indicators	1 x Green - OK, 1 x Amber - Fault, 1 x Red - Alarm
Internal data log	1 log every 30 seconds for at least 7 days of continuous use
Batteries	2 x NiMH 2100mAh AA batteries (or suitable AA type batteries)
Battery discharge time	15 hours under normal operation (passive atmospheric monitoring, minimal user interaction, no alarms)
Battery lifespan	2 years
Battery charge time	4.5 hours (from flat)
Charge power supply rating	9 V DC - 0.55A
Dimensions	127 x 44 x 90 mm / 5 x 1.7 x 3.5 inches (HxDxW)
Electronics warranty	2 years
IP rating	IP65

Aspida Sensors

CO2 Sensor	O2 Sensor
Sensor type	Analox infrared MIR	Electrochemical
Range	0.01 to 5%	0.1 to 25%
Accuracy (at standard temperature and pressure)	±2% of full scale between 0.01% and 2.5%, ±3%	±3% of full scale between 0.1% and 25%
Response time	T90 <60 seconds	T90 <30 seconds
Sensor life span	5 years	2 year (expected)

Characteristics

Personal Protection

Enriched oxygen (O2) can cause a condition on the human body called hyperoxia, enriched CO2 is highly toxic, both are a threat to life and must be safeguarded against. If an inert gas such as nitrogen (N2), argon (Ar), helium (He) or liquid nitrogen (LN2) leaks then this will deplete the levels of oxygen (O2) in the surrounding area, creating a dangerous atmosphere. The Aspida can offer personal protection and alerts to all of these risks, offering you true peace of mind.

Ideal Solution

Offering audible and visual alarms, data logging and a man down alarm for lone workers, it is an ideal solution to protect staff from the dangers of a leak of carbon dioxide (CO2), oxygen (O2) or inert gas. The Aspida is an affordable, easy to operate gas detection monitor and is perfect for ensuring safety in areas where the gas is piped, used or stored. It operates using rechargeable battery technology allowing it to run for more than 12 hours continuously between charges.

Click here to download User Manual

Click here to download Data Sheet

Download Aspida Software

CO2 MONITOR & ALARM DESIGNED FOR KIOSKS

The Ax60+ Kiosk is a CO2 monitor and alarm specifically designed by Analox to alert personnel to a build up/leak of CO2 using a state-of-the-art infrared sensor. The alarm provides both audio and visual alerts in the case of increased levels of carbon dioxide (CO2). Up to four alarms can be added as needed and the unit does not need periodic calibration.

CO2 monitoring with the AX60+ Kiosk

The Ax60+ Kiosk is a smaller version of the popular Ax60+ carbon dioxide (CO2) monitor. It is simple to wall mount in the area where carbon dioxide (CO2) is stored or piped. The Ax60+ Kiosk sensor needs to be installed at a height of 12-18 inches (305-457mm) above the floor – this is because the carbon dioxide (CO₂) that leaks from a gas cylinder is denser than ambient air and can collect at low levels. The alarm should be located above the sensor at about head height or at the entrance to the kiosk.

Technical Specification

Sensor Unit


Gas detected	Carbon Dioxide (CO2)
Sensor technology	Infrared
Range	0.1% to 5%
Default alarm set-points	USA regulations (NFPA 55, IFC, NBIC, OSHA and NIOSH): TWA - 5,000ppm (0.5%) AL1 - 5,000ppm (0.5%) AL2 - 15,000ppm (1.5%) AL3 - 30,000ppm (3%) International/European regulations (EH40) (DIN 6653-2:2015-06 compliant, assessed by TUV): TWA - 5,000ppm (0.5%) AL1 - 15,000ppm (1.5%) CO2 - 30,000ppm (3%)
Warm up time	40 Seconds
Resolution	0.01%
Accuracy	±2.5% of the alarm levels
Response Time	30 seconds to T90
IP Rating	IP55
LED indicators	Green = Power

Alarm Unit


Strobe	White LED strobe, with an option to change to blue, red or amber filter.
Sounder	min 80 dBA @3 m (9.8 feet)
IP Rating	IP55
LED indicators	Green = Power, Amber = Fault
Cable	2m included

Description

The HYP is a rugged and compact portable partial pressure monitor. Simple to operate, the HYP accurately reads oxygen (O2) levels within the hyperbaric environment.

O2 monitoring with the HYP

Classification bodies and industry guidelines within the diving market require each hyperbaric chamber to have a means of providing independent oxygen (O2) monitoring in the event of the primary monitor failing. The HYP is a portable PPO2 monitor capable of helping you to achieve such guidelines.

Oxygen Sensor

The compact size allows for convenient fitting within confined spaces such as diving bells and hyperbaric lifeboats, or alternatively the unit can easily be hand carried. It is very simple to use, with just a single push-button to switch power on and off, and an LCD display. It may be used at depths of up to 600MSW / 2000FSW, and can also be used at surface pressures.

Technical Specification

HYP

Range	0.00 to 2.00bar ppO2
Accuracy	± 1% of reading, ± 1LSD
Sensor warranty	3 months
Sensor response	<15 secs to T90
Sensor Life	Up to 3 years in air at (STP)
Power	9V Alkaline (PP3)
Battery life	1 month (800 hours) continuous operation or 3 months operation for 8 hours per day
Electronics Warranty	1 Year
Operating temperature	0°C to 40°C
Operating pressure	0.8 to 60 bar absolute (approx. 600MSW/2000FSW)
Dimensions	H 98mm x D 36mm x W 64 mm
Weight	200g
Replacement sensor	9100-9212-5H

Additional key features

Accurate and fast response to O2 levels

Compact and robust housing
Easy to read large display
Versatile, the HYP is suitable for use in; diving bells, hyperbaric chambers, hyperbaric lifeboats and submarines
Calibration every 6 months

Click here to download Data Sheet

Click here to download Quick Start Guide

Click here to download User Manual

Technical Parameters

Product Model	Smart-RO15	Smart-RO30
Pure water output*	15L/Hour	30L/Hour
Instantaneous water output**	Up to 2.0L/Min (when there is water in the water tank)
RO reverse osmosis water indicators
Ion retention rate	97%-99% (when using new RO membrane)
Organic matter retention rate	>99%, when MW>200 Daltons
Particle and bacteria retention	>99%
bacteria	<0.01 cfu/ml (optional (0.45+0.1)μm imported PES terminal filter)
Particles (>0.2μm)	<1/ml (optional (0.45+0.1)μm imported PES terminal filter)
Raw water requirements	Urban drinking tap water, water temperature 5-45℃, water pressure 1.0-4.0Kgf/ ^cm2
Instantaneous water output	2.0L/min (pressure water bucket required)
Water outlet	1: RO reverse osmosis water
Dimensions/weight	Length × width × height: 41 × 22 × 42 cm / about 20 kg
Electrical requirements	100-240V, 50/60Hz
power	48W	72W
System Configuration	Main unit (including 1 set of purification column) + 15L pressure water bucket + TDS/conductivity test pen + accessory bag

Consumables Information


Part Number/Model	Product Name	Service life/root (estimated)
PC-M-PP	5μmPP depth filter element	About 2-6 months
PC-PP-ZK	Zikang PP filter element	About 2-6 months*
PC-AC-B-ZK	Zikang activated carbon filter	About 4-6 months*
PTC-AC-HZS1	Organic matter purification column	About 6800 liters of pure water
RO-100GPD	100GPDRO membrane	About 1-2 years
RO-200GPD	200GPDRO membrane	About 1-2 years
PTC-MBR-K	Deionization purification column (imported resin)	About 1000 liters of pure water/column
PTC-UPPR-K	Ultrapure water column (imported resin)	About 1000 liters of pure water/column
TF-(0.45+0.1)μm-S	(0.45+0.1)μm imported PES terminal filter	-
UF-5000D	MWCO5000DUF ultrafiltration component (original imported)	-
UV-(185nm&254nm)-10W-K	Dual wavelength (185nm & 254nm) UV lamp assembly (imported)	-
LAMP-(185nm&254nm)-10W-K	Dual wavelength (185 & 254nm) UV lamp (imported)	About 9000 hours
UV-254-10W-K	254nmUV ultraviolet lamp assembly (imported lamp tube)	-
LAMP-254-10W-K	254nm UV lamp (imported)	About 9000 hours

DETAILS B + Compound B + Compound utilizes several lines of sight for optimal contrast resolution, speckle reduction and border detection, with which P10 is ideal for superficial and abdominal imaging with better clarity and improved continuity of structures. μ-Scan The new generation μ-Scan imaging technology gives you better image quality by reducing noise, improving signal strength and improving visualization. P10 offers a comprehensive selection of electronic probes to maximize its capabilities to meet a wide range of applications including abdomen, pediatric, OB/GYN, cardiovascular, musculoskeletal, etc. The advanced probe technologies also effectively enhance the image quality and confidence in reaching clinical diagnoses, even in difficult patients. Convex Probe 3C-A Ideal for an abundant of application such as abdomen, gynecology, obstetrics, urology and even abdomen biopsy. Linear Probe L741 This linear probe is designed to satisfy vascular, breast, thyroid, and other small parts diagnosis, and its adjustable parameters could also present users a clear view of MSK and deep vessels. Phase Array Probe 3P-A For the purpose of adult and pediatric cardiology and emergency, the phase array probe provides elaborate presets for different exam modes, even for difficult patients. Intracavitary Probe 6V1 Intracavitary probe could face application of gynecology, urology, prostate, and its temperature detection technology not only protects the patient but also extends the service life.

Click Here To Download Catalogue

DETAILS Super Wide-bandwidth Platform Inheriting Wi-sono's ultra-wide system platform and with the advanced probe technology, high-resolution and deep penetration images are provided for precision medicine. Spatial Compound Imaging Spatial Compound Imaging utilizes several lines of sight for optimal contrast resolution, speckle reduction and border detection, with which P15 is ideal for superficial and abdominal imaging with better clarity and improved continuity of structures. μ-Scan+ The new generation μ-Scan imaging technology gives you better image quality by reducing noise, improving signal strength and improving visualization. Dynamic Color Dynamic color improves upon already existing color Doppler technologies for a clearer capture of color flow and detailed visualization of even tiny veins with lower velocities. Real-time Panoramic With real-time panoramic, you can acquire an extended field of view for large organs or long vessels for easy measurement and diagnostic efficiency. Accomplished in real-time for the convenience of the sonographers, any mistake can also be easily back tracked and corrected without interrupting the scan. 3D/4D Outstanding volume performance with speed and convenience makes P15 outshine others on volume imaging. Tissue Doppler Imaging Tissue Doppler Imaging allows clinical doctors to quantitatively evaluate local myocardial movements and functions, facilitating them with the ability to analyze and compare the motions of the different parts of the patient's heart. Auto IMT Quick measurement of intra-media vessel thickness ensures good reproducibility and high diagnostic efficiency.