Pilot Freeze Dryer

Lab Freeze Dryer Features:

1. 7-inch touchable panel displays digital and curve data for sample's temperature, condenser temperature, and vacuum valve.
2. Touch panel is designed with ergonomics in mind, providing comfortable operation.
3. Standard USB interface, data can be exported conveniently for user information management.
4. Large-volume stainless steel condenser without coils enables independent sample pre-freezing.
5. Rack temperature can be adjusted and controlled to aid in freeze-drying technology research.
6. The condenser and drying chamber are separately designed for high moisture capture and fast dry time.
7. Freeze dryer has two working modes, manual and automatic, are available with 40 programs in the automatic operation program, each with 40 temperature control sections to meet various freeze-drying processes.
8. User level and password can be set for decentralized operation and management.
9. The equipment can save hundreds of process recipes with each group containing 40 temperature control sections to improve process optimization rate.

1. In-situ freeze-drying design, avoid the contamination during material transfer;
2. High performance compressor, cascade system, high cooling efficiency and fast cooling speed.
3. The rack is cooled and heated by silicone oil for more uniform temperature and 1°C accuracy.
4. Condenser and operation panel are made by stainless steel.
5. High transparent organic glass in drying chamber helps users to observe materials changes.
6. Pirani vacuum gauge is used to ensure stable freeze-drying performance
7. Automatic defrost function.

Product Data

• Freeze Drying Area (m2) : 0.24 / 0.24 / 0.36 / 0.36 / 0.5 / 0.5 / 1 / 1
• Tray Size (LxWxD)(mm) : 300x400x13
• Condenser Temperature (no-loading) (℃) : ≤-80
• Vacuum Degree (no-loading) (Pa) : ≤5

Lab Point Freeze Dryer Specifications:

Click Here To Download Catalogue

• Auto zero function: Manual blanking not required
• Dual wavelength measurement system:
• 2 wave lengths 455nm and 575nm
• Plays major role to remove the interference caused due to Hemolysis & turbidity of sample
• LED Light source:
• LED does not require replacement as it lasts longer
• As compared to Lamp, LED are more suitable as there is no intensity fluctuations
• No warm up time required.
• Flexible unit selection:
• Two units either mg/dl or umol/L are selectable, ease of reporting
• Compact slot for Capillary:
• Accuracy of results are directly related to proper alignment of Capillary
• B-111 has the easiest mode to ensure precise values
• Data transfer:
• External device can be connected to instrument through RS232 por
• USB port

• Light source - LED
• Wavelength - 455nm and 575nm
• Net weight - 1kg
• Measuring range - 0-30 mg/dl , 510 umol/L
• Display - 16×2 LCD module with backlight
• Auto calibration - Yes
• Sample type - Serum or plasma
• Sample volume - 40-80μL
• Test time - <5sec
• Units - mg/dl or umol/L
• Dimensions - 150 (W) × 115 (H) × 190 (D) mm
• Interface - RS232
• Reading cuvette - Heparinized micro capillary holder
• Storage temperature - 15-40°c
• Power supply - DC 9V(DC adapter)
• Power consumption - <2W

• Indicator light indicates working state.
• For 4~6 minutes rapidly sterilizing.
• Sterilizing temperature and time can be preset.
• Steam-water inner circulation system: no steam discharge, and the environment for sterilizing will be clean and dry.
• Over temperature & over pressure auto-protection.
• Safe protection of water lacking.
• Exhaust the cool air automatically.
• With three stainless steel sterilizing plates.
• The chamber of the sterilizer is made of stainless steel.
• Automatically shut off with beep reminding after sterilization.