Spin Tissue Processor STP 120

Name: Spin Tissue Processor STP 120
SKU: SF1033560130128-3
Price: 6050.00 USD
Availability: InStock

Brands: Myr

$6,050.00

Shipped From Abroad

Myr Spin Tissue Processor STP 120 has been developed to meet the requirements of every single laboratory. The technology and the unique processing method of the STP 120 qualifies it as the most successful Spin Tissue Processors ever. With more than 3.500 units installed around the world confirms its leading position.

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Sku:

SF1033560130128-3

Brands:: Myr

Description
Reviews (0)

Description

Features

A worldwide unique technique

Tissue processing is a technique than uses alcohols to remove water from tissues and replace it with a medium that allows sectioning of tissue. Several methods are used to achieve this. Myr Spin Tissue Processor STP 120 fulfills it in a patented and unique technique that combines several movements for the tissue to achieve perfect infiltration results. This is possible thanks to the world’s best spin processing method.

ROTATIONAL AGITATION

The basket with the cassettes is immersed into the reagent vessel. In this position, the basket turns at 60 rpm and changes the rotational direction every 60 seconds. The rotational agitation achieves a perfect infiltration of tissue, a homogeneous mixture of the reagents and a reduction of processing time. To get better results, the user can start optionally a shaking process.

SHAKING

This movement can be optionally activated on the control panel and allows the basket to perform an up-down movement inside the vessel that combined with the rotational agitation fulfills a helicoidal movement that increases infiltration quality at a high degree of precision. At the end of this process, baskets start centrifuging.

CENTRIFUGING

This function is activated as soon as the infiltration time comes to an end. The basket rises above the reagent’s level but rests inside the vessel. For a period of 60 seconds, it starts whirling at 210 rpm and changes the rotational direction every 15 seconds. This process allows the tissue to be optimally drained and avoids carry-over of reagents from one vessel to another.

Tissue processing achieves by this method almost similar results to those obtained with vacuum systems!

Ergonomic control panel

The buttons of the control panel are arranged ergonomically for easy handling. The LCD display shows all the parameters throughout the process, such as program number, vessel, remaining time, start delay, total duration of the program, rotational agitation and shaking, basket’s centrifuging, temperature of paraffin baths, date and time.

Easy handling

The instrument has the capacity to store up to 10 different programs that can be freely set up by the user. Each one of the programs can be started in immediate or delayed mode, without a time limit. The instrument can easily be rotated via the four rollers mounted on the base. This allows the user to have fast and safe access to each one of the vessels.

Maximum safety standards for the user and the specimen

In case of a power shutdown, the specimens are automatically lowered inside the vessel by means of a battery to protect them against desiccation and solid paraffins. Once power is restored, the instrument resumes the program at the same point in which it was interrupted. lf it is a long power failure and the paraffin baths become solidified, the safety program will be activated. The instrument will then wait for the baths to be fully liquified before going ahead with the change to the paraffin baths.

Emergency motions can be implemented through the battery, such as moving the basket up and down or station change (as long as the basket is not inside a solidified paraffin bath). The instrument is also equipped with an emergency stop button. It is possible to interrupt a program for reloading or advanced unloading of samples.

Alarms during the process

If the specimens remain inside a station for a longer time than the programmed time, e.g. due to a power failure, the display will show a message indicating the station number and the overtime spent in that station compared with the initially programmed time. The acoustic and visual alarms can easily be identified by the user. The keyboard can be locked by the user to avoid an inadvertent change of the process parameters during operation.

Technical Data Spin Tissue Processor STP 120

Power requirements
Nominal voltage	100 – 120 V	220-240 V AC (±10%)
Network’s frequency	50/60 Hz
Consumption	400 VA
Fuses	115 V (2xT4A)	230 V (2xT2A)
Accumulator Nickel-Cadmium	12 V 600 mA
Capacity
Reagent stations
Number of vessels	10 (9 if 3 paraffin baths are used)
Volume per vessel	1,8 l
Paraffin stations
Number	2 (optionally 3)
Volume	1,8 l
Nominal voltage	24 V AC
Nominal power per station	100 VA
Temperature setting range (temperature increase by 1 degree celsius)	45 – 70 °C
Overtemperature release	75 °C (± 4 °C)
Cassette baskets
Number of baskets	1 (optionally 2)
Basket capacity	120 cassettes (optionally 240)
Programming
Number of programs	10 (selectable)
Infiltration time per station	from 1 m to 99 h 59 m
Rotational agitation	selectable
Shaking	selectable
Centrifuging time	selectable
Program start delay	selectable without time limit
Dimensions
Diameter	850 mm
Height	500 – 700 mm
Diameter of the roller’s circle	670 mm
Weight
Including packaging	130 kg
Net (fully equipped)	70 kg

Optional accessories

Spiral support for a second cassette basket (double processing capacity)

Additional basket

Additional paraffin bath (necessary when operating the processor with two baskets)

Fume extraction system with active charcoal filter

Click here to download Catalogue

Reviews

There are no reviews yet.

Be the first to review “Spin Tissue Processor STP 120”

Quick Comparison

Settings Spin Tissue Processor STP 120 remove Syringe Needle Destroyer remove Eppendorf Minispin Centrifuge remove Zenithlab Hot Air Oven remove OPTIKA B-510-5 Trinocular Discussion Microscope remove Optika B-510BF Trinocular Brightfeld Microscope remove

Name Spin Tissue Processor STP 120 remove Syringe Needle Destroyer remove Eppendorf Minispin Centrifuge remove Zenithlab Hot Air Oven remove OPTIKA B-510-5 Trinocular Discussion Microscope remove Optika B-510BF Trinocular Brightfeld Microscope remove

Image

SKU SF1033560130128-3 SF1033560084-206 SF1033560084-116 SF1033560084-151 SF1033560098-17 SF1033560098-10

Rating

Price

$6,050.00

$157.00

~~$0.00~~

$352.00

~~$0.00~~

Stock

Availability

Add to cart

Description

Shipped From Abroad Myr Spin Tissue Processor STP 120 has been developed to meet the requirements of every single laboratory. The technology and the unique processing method of the STP 120 qualifies it as the most successful Spin Tissue Processors ever. With more than 3.500 units installed around the world confirms its leading position.

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock Needle destruction destroy the needle immediately following its use. Needle destruction are an absolute necessity in developing parts of the world to prevent the reuse of needles and the spread of bloodborne pathogens. They are NOT a good alternative, however, for hospital use in the developed parts of the world. Needle destruction are products that bend, cut, or destroy the needle. This are distinctly different from needle destroyer that send an arc of electricity to vaporize and melt the needle.

Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock

Powerful and user-friendly MiniSpin Centrifuge are small enough so that each workstation can be equipped with a “personal” centrifuge. The rotor, inner centrifuge lid, and lid latch are made of metal for maximum operation safety. Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock

Classification: Laboratory Thermostatic Devices
Brand Name: Zenith Lab
Model Number: DHG-9070A
Working size(mm): 450*350*450
Power: 1000W
Temperature range: 50~200℃
Temperature resolution: 0.1℃
Temperature fluctuation: ±1℃
Timer: 0-999min
Voltage: 110V 60Hz /220V 50Hz
Dimension(mm): 620*710*620
Weight: 45kg

Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped from Abroad OPTIKA B-510 Series represents the ideal, ultra-modern, advanced routine microscope for efficient analysis in transmitted light applications, carefully engineered considering all the relevant aspects for users.

Delivery & Availability: Typically 21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped from Abroad Advanced routine laboratory microscope for brightfield observations with IOS W-PLAN objectives and rackless stage. The high-efficiency X-LED3 makes it reliable for all transmitted light observations for great-looking, rich and high-quality view.

Delivery & Availability: Typically 21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Content

Features

A worldwide unique technique

ROTATIONAL AGITATION

SHAKING

CENTRIFUGING

Tissue processing achieves by this method almost similar results to those obtained with vacuum systems!

Ergonomic control panel

Easy handling

Maximum safety standards for the user and the specimen

The individual cover for each one of the vessels reduces the emission of vapors to a minimum. The STP 120-2 and STP 120-3 versions incorporate a fume extraction system that – through a fan and an active charcoal filter – cleanse the vapors before being discharged into the air. Optional adaptor for the laboratory general extraction system. In case of a power shutdown, the specimens are automatically lowered inside the vessel by means of a battery to protect them against desiccation and solid paraffins. Once power is restored, the instrument resumes the program at the same point in which it was interrupted. lf it is a long power failure and the paraffin baths become solidified, the safety program will be activated. The instrument will then wait for the baths to be fully liquified before going ahead with the change to the paraffin baths.

Alarms during the process

Technical Data Spin Tissue Processor STP 120

Power requirements
Nominal voltage	100 – 120 V	220-240 V AC (±10%)
Network’s frequency	50/60 Hz
Consumption	400 VA
Fuses	115 V (2xT4A)	230 V (2xT2A)
Accumulator Nickel-Cadmium	12 V 600 mA
Capacity
Reagent stations
Number of vessels	10 (9 if 3 paraffin baths are used)
Volume per vessel	1,8 l
Paraffin stations
Number	2 (optionally 3)
Volume	1,8 l
Nominal voltage	24 V AC
Nominal power per station	100 VA
Temperature setting range (temperature increase by 1 degree celsius)	45 – 70 °C
Overtemperature release	75 °C (± 4 °C)
Cassette baskets
Number of baskets	1 (optionally 2)
Basket capacity	120 cassettes (optionally 240)
Programming
Number of programs	10 (selectable)
Infiltration time per station	from 1 m to 99 h 59 m
Rotational agitation	selectable
Shaking	selectable
Centrifuging time	selectable
Program start delay	selectable without time limit
Dimensions
Diameter	850 mm
Height	500 – 700 mm
Diameter of the roller’s circle	670 mm
Weight
Including packaging	130 kg
Net (fully equipped)	70 kg

Optional accessories

Spiral support for a second cassette basket (double processing capacity)

Additional basket

Additional paraffin bath (necessary when operating the processor with two baskets)

Fume extraction system with active charcoal filter

Click here to download Catalogue

Needle destruction destroys the needle immediately following its use. Needle destruction are an absolute necessity in developing parts of the world to prevent the reuse of needles and the spread of bloodborne pathogens. They are NOT a good alternative, however, for hospital use in the developed parts of the world. Needle destruction are products that bend, cut, or destroy the needle. This are distinctly different from needle destroyer that send an arc of electricity to vaporize and melt the needle. Features:

Well built
Easy to maintain
Having a rubbish drawer with alarm function, this is our most popular model of Syringe Destroyer for use in labs, pharma, universities and doctors clinics
With its low factory-direct price and excellent quality, its a great addition to add to any medical industry or university office that wants to ensure the safety and legal compliance of its operations

Specifications:

Short Name: Needle destruction / Needle Destroyer
Working Noise: ≤50 decibel
Superheating Sanitization Temperature: 95 deg C
Working Time: Can completely melt and destroy needle and neck of syringe in 5 seconds
Working Noise: ≤50 decibel
Dimensions: Approx. 38cm x 29cm x 28cm
Power: AC 110V or 220V

Rotor capacity: 12 x 1.5/2.0 mL vessels, 2 x PCR strip
Max. speed: 14,100 x g (14,500 rpm)
Extremely compact footprint — measures 9”W x 4.”H x 9ó”D!
Aluminum rotor accommodates twelve 1.5- or 2.0-mL tubes (maximum diameter of 11 mm)
Rotor can be autoclaved at 121°C for 20 minutes
Minimal sample heat transfer — maximum of 12°C after 20 minutes at max speed
Eliminate costly repairs with the low maintenance drive
Soft-touch lid closure for ergonomic lid locking — and releases automatically at the end of a run

Technical Specifications:

Speed:	800 – 13,400 rpm (100 rpm steps)
Capacity:	12 x 1.5/2.0 mL
Electrical:	120 V, 60 Hz
Dimensions:	(W x D x H) 22.6 x 23.9 x 12.0 cm
Weight:	4.3 kg

Click Here To Download Catalogue

Classification: Laboratory Thermostatic Devices
Brand Name: Zenith Lab
Model Number: DHG-9070A
Working size(mm): 450*350*450
Power: 1000W
Temperature range: 50~200℃
Temperature resolution: 0.1℃
Temperature fluctuation: ±1℃
Timer: 0-999min
Voltage: 110V 60Hz /220V 50Hz
Dimension(mm): 620*710*620
Weight: 45kg

Observation mode: Brightfield. Head: Trinocular (fixed photo port 50/50), 30° inclined, 360° rotating. Interpupillary distance: Adjustable between 50 and 75 mm. Dioptric adjustment: On the left eyepiece tube. Eyepieces: Main head: WF10x/22 mm, high eye-point and with rubber cups. Additional head(s): WF10x/20 mm, high eye-point. Nosepiece: Quintuple revolving nosepiece, rotation on ball bearings. Objectives (strain-free): – IOS W-PLAN 4x/0.10 – IOS W-PLAN 10x/0.25 – IOS W-PLAN 40x/0.65 – IOS W-PLAN 100x/1.25 (Oil) All with anti-fungus treatment. Specimen stage: Double layer rackless mechanical stage, 233×147 mm, 78×54 mm X-Y range. Focusing: Coaxial coarse (adjustable tension) and fine focusing mechanism with limit stop to prevent the contact between objective and specimen. Condenser: Swing-out N.A. 0.2/0.9, with iris diaphragm, focusable and centerable. Transmitted illumination (Full Koehler type): X-LED³ with white 3.6 W LED (6,300K) with brightness control. Multi-plug 100-240Vac/6Vdc external power supply.

Specifications:

Optics
Image scale	4-100
Number of objectives	4
Lighting	Transmitted light
Field curvature	Plan
Colour correction	achromatic
Suspension	yes
Immersion lens	yes
Condensor	Abbe N.A.1.25
Lamp type	LED (X-LED3, 3.6 W, comparable to a 50 W halogen bulb)
Objective 1	IOS W-PLAN 4x/0.10, W.D. 17.3 mm
Objective 2	IOS W-PLAN 10x/0.25, W.D. 10 mm
Objective 3	IOS W-PLAN 40x/0.65, W.D. 0.54 mm
Objective 4	IOS W-PLAN 100x/1.25, W.D. 0.13 mm, oil
Eyepiece	WF 10x / 22 mm (Ø 30mm)
infinity corrected	yes
Magnification	40-1000
Optical system	infinity
Capacity
Brightness control	yes
Fluorescence	yes
brightfield	yes
Mechanics
Type of build	Trinocular
Viewing posture (°)	30° angled eyepiece
Specimen stage	Cross table
Revolver	5
Focusing	Coarse and fine movement
General
Weight (g)	9100
Height (mm)	420
Width (mm)	270
Length (mm)	390
Series	B-510
Field of application
Biology and Medicine	yes

Click Here To Download Catalogue

Advanced routine laboratory microscope for brightfield observations with IOS W-PLAN objectives and rackless stage. The high-efficiency X-LED3 makes it reliable for all transmitted light observations for great-looking, rich and high-quality view. Features:

Observation mode: Brightfield.
Head: Trinocular (fixed 50/50), 30° inclined, 360° rotating.
Interpupillary distance: Adjustable between 50 and 75 mm.
Dioptric adjustment: On the left eyepiece tube.
Eyepieces: WF10x/22 mm, high eye-point and with rubber cups.
Nosepiece: Quintuple revolving nosepiece, rotation on ball bearings.
Objectives: – IOS W-PLAN 4x/0.10 – IOS W-PLAN 10x/0.25 – IOS W-PLAN 40x/0.65 – IOS W-PLAN 100x/1.25 (Oil) All with anti-fungus treatment.
Specimen stage: Double layer rackless mechanical stage, 233×147 mm, 78×54 mm X-Y range.
Focusing: Coaxial coarse (adjustable tension) and fine focusing mechanism with limit stop to prevent the contact between objective and specimen.
Condenser: Swing-out N.A. 0.2/0.9, with iris diaphragm, focusable and centerable.
Transmitted illumination (Full Koehler type): X-LED³ with white 3.6 W LED (6,300K) with brightness control. Multi-plug 100-240Vac/6Vdc external power supply.

Technical Specifications:

Observation Method - Transmitted Light	Brightfield	Yes
	Phase contrast (Positive type)	As optional
	Darkfield	As optional
	Simple polarized light	As optional
Main Body	Type	Upright
	Construction material	Aluminum die-cast
	Trasportation handle	Yes
Head	Type	Trinocular (Siedentopf)
	Split ratio	50/50
	Inclination	30°
	360° rotating	Yes
	Interpupillary distance (mm)	50-75
	Dioptric adjustement	On left tube
	Tube inner diameter (mm)	30
Eyepieces	Field number (mm)	22
	Magnification	10x
	Planar type	Yes
	Micrometric scale	As optional
	Diameter of micrometer glass (mm)	26
	High eyepoint (for glass wearers)	Yes
	Rubber cup	Yes
	Retractable protections	Yes
Nosepiece	Positions	Quintuple
	Reversed	Yes
	Bi-directional	Yes
	Rotation on ball bearings	Yes
	Objective thread	RMS
Objectives	Optical system	∞
	Anti-fungus treatment	Yes
	Parfocal distance (mm)	45
	Standard magnifications	40x-1000x
	Type	IOS W-PLAN
	Objectives included	4x/0.10, W.D. 17.3 mm 10x/0.25, W.D. 10 mm 40x/0.65, W.D. 0.54 mm 100x/1.25 (Oil), W.D. 0.13 mm
Stage	Type	Double layer
	Dimensions (mm)	233x147
	Moving mechanism	Rackless
	Moving range (mm)	78x54
	Material	Anti-scratch painting
	Specimen holder	Yes
	Slide number	2
	Click-stop (45°)	No
	X-Y Vernier scale	Yes
	Vernier scale accuracy (mm)	0.1
Condenser - Single Position	Type	Swing-out
	Removable	Yes
	Numerical aperture (N.A.)	0.2 / 0.9
	Diaphragms	Iris
	Centrable	Yes
	Focusable	By rack and pinion
Focusing System	Type	Coaxial coarse & fine
	Coarse total travel (mm)	25
	Fine total travel (per single rotation) (mm)	0.2
	Fine graduations	100
	Fine resolution (µm)	2
	Upper stop to prevent contact	Yes
	Adjustable tension	Yes
	Flat knob for ergonomy	Yes
Transmitted Illumination	Kohler illumination	Full
	Type	X-LED
	X-LED type	X-LED3
	Light source power (W)	3.6
	Brightness control	Manual
	Lifetime (hours)	> 65,000
	Temperature (K)	6,300
	Max. required power (W)	6
Power Supply for Transmitted Illumination	Type	External
	Microscope connector	Jack, 2.1 mm
	Power plug type	Multi-plug (EU, UK, US)
	Input voltage	100/240 Vac, 50/60 Hz
	Output voltage	6 Vdc 2.5A
Accessories Included	Dust cover	Yes
	Immersion oil (10ml)	Yes
	Tension adjustment tool	Yes
	Allen wrench	Yes
	User Manual	Digital version (downloadable)
Additional Information		Heating stage (as optional). External rechargeable battery pack (as optional).
Product Weight	Height (mm)	420
	Width (mm)	270
	Depth (mm)	390
Product Weight	(kg)	9