STERIPLUS 80

$0.00

Shipped From Abroad

INTEGRATED INFECTIOUS WASTE PRE-SHREDDING AND STEAM STERILIZATION SYSTEM

Tesalys STERIPLUS ™ systems are the ideal solution to safely inactivate your infectious waste on site. Their integrated TESASHRED ™ shredding system not only allows a consequent reduction in the volume and weight of waste, but also guarantees their treatment at heart.

 

Click here to download Catalogue
Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
SF103356013097-3
Brands:: Tesalys

Description

STERIPLUS  80
On-site infectious risk waste treatment solution

Features

Fully automated

The STERIPLUS™ 80 is an easy-to-use, on-site processing solution.

Large capacity

The loading chamber has a capacity of 80 litres, i.e. 1 TESABOX 80 or 2 TESABOX 40 or 4 TESABOX 20.

Fully integrated system

The STERIPLUS™ 80 is a fully automated solution for pre-grinding and steam sterilization of infectious wastes.

 

Technical Data

 

LOADING CHAMBER CAPACITY 80 L
LOADING CHAMBER USEFUL DIMENSIONS (W x D x H) 370 x 360 x 628 mm
LOADING CAPACITY (containers) 1 X TESABOX 80 or 2 X TESABOX 40 or 4 X TESABOX 20
TOTAL CYCLE TIME (NF X30-503-1 standard) (1) 30 to 35 min
TOTAL CYCLE TIME in working conditions (2) 30 to 50 min.
LOADING CAPACITY (KG/CYCLE) 6,4 to 9,6 kg/cycle – Based on an average waste density of 0,08 to 0,12kg/L for HealthCare Waste 9,6 to 16 kg/cycle- Based on an average waste density of 0,12 to 0,2kg/L for Lab/Humid/Liquid
TREATMENT CAPACITY (KG/H) (3) 8 to 12 kg/h – Based on an average waste density of 0,08 to 0,12kg/L for HealthCare Waste 12 to 20 kg/h – Based on an average waste density of 0,12 to 0,2kg/L for Lab/Humid/Liquid
MAX QUANTITY OF LIQUID RECOMMENDED PER CYCLE (4) 24 L
EXTERNAL DIMENSIONS (w x d x h) 1550 x 1200 x 1800 mm
NET WEIGHT 1300 kg
LOADING CHAMBER Stainless steel with PTFE coating
TREATMENT CHAMBER AISI 304L stainless steel
STEAM GENERATOR AISI 304L stainless steel (chamber) & Highly corrosion-resistant Hastelloy®
WATER SOFTENER Built-in
WATER BOOSTER PUMP AND AIR COMPRESSOR Built-in
WASTER SHREDDER Structure: AISI 304L stainless steel & Blades: High-strength steel
PIPING Stainless steel/PTFE flexible hosing
CHASSIS Painted steel
BODYWORK Composite material / Painted steel
CYCLE TRACEABILITY – THROUGH PRINTOUT Built-in
USB PORT Built-in

 

Utilities
WATER
Requirements Softened water (4-8°TH)
Consumption 15 liters / cycle
ELECTRICITY
Requirements 380-400 V III N, 50Hz/60Hz, 20 kW
Consumption 3 kWh/cycle
DRAIN ø 32 mm  internal (heat-resistant)
STEAM/COMPRESSED AIR Produced by the integrated steam generator and air compressor; no external connection required.
Accessories

 

 

 

 

 

 

Reviews

There are no reviews yet.

Be the first to review “STERIPLUS 80”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsSTERIPLUS 80 removeAsco Traction Table removeIBIS Neeo R9 Digital Surgical C-Arm removeKeewell FT-2800 Blood & Infusion Warmer removeADE M501660 Wheelchair Scale removeBistos BT- 410 Medical Head Lamp remove
NameSTERIPLUS 80 removeAsco Traction Table removeIBIS Neeo R9 Digital Surgical C-Arm removeKeewell FT-2800 Blood & Infusion Warmer removeADE M501660 Wheelchair Scale removeBistos BT- 410 Medical Head Lamp remove
ImageIBIS Neeo R9 Digital Surgical C-ArmBistos BT-410 Medical Head Lamp
SKUSF103356013097-3SF1033560093SF1033560011-1SF1033560075SF1033560099SF1033560059-6
Rating
Price

$0.00

$825.00

$0.00

$781.00

$0.00

$132.00

Stock
Availability
Add to cart

DescriptionShipped From Abroad
INTEGRATED INFECTIOUS WASTE PRE-SHREDDING AND STEAM STERILIZATION SYSTEM
Tesalys STERIPLUS ™ systems are the ideal solution to safely inactivate your infectious waste on site. Their integrated TESASHRED ™ shredding system not only allows a consequent reduction in the volume and weight of waste, but also guarantees their treatment at heart.  
Click here to download Catalogue
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped from Abroad
Traction Table
The Traction Table is a 4 Section Traction with 2 motors, one for Hi/Lo Adjustment and the other one for Center Arching Mechanism. All four corners of EU300 Traction Table are supported by 3 inches swivel castors, one at each corner.  Delivery & Availability: Typically 14-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped from Abroad Our Neeo “C” arms are easy to place, use and are specifically designed to be used in orthopedics, traumatology, abdominal surgery, urology, cardiology and operating rooms. Delivery & Availability: Typically 21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.Shipped From Abroad
Technology of control: Microprocessor integrated with temperature sensors provides high precise control Safety system: Permanent running self-tests, 24 hours continuous operating Double independent over-heating protections and automatic cut off Visual and acoustic alarm for high temperature / low temperature/sensor fault Dual channels: Each channel can work independently with own temp. setting and temp control Two channels can be combined to enlarge the warming capacity Heating up to the patient: IV tube is completely wrapped in, no heat loss Delivery & Availability: Typically 7-14 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad
Electronic wheelchair scale with integrated ramps on both sides. Two handgrips and transport castors allow an easy handling of the scale. The all steel construction provides extra stability and takes weight up to 300 kg. Delivery & Availability: Typically 14 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped from abroad Bistos BT- 410 Medical Head Lamp - Head-worn light BT-410 provides not only comfortable wear but also convenient for use during examinations or operations. - Ultra bright LED light with High density LED - Easy to adjust head strap & an angle - Extensive LED lifetime (more than 50,000 hours) - More than 4 hours of continuous use - An additional astral LED lamp (optional) - Attachable loupe (optional) Delivery & Availability: Typically 7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Content
STERIPLUS  80
On-site infectious risk waste treatment solution
https://youtu.be/ahPvNNrzIMk?si=8dLL5Pn1YWY_sUM7
Features

Fully automated

The STERIPLUS™ 80 is an easy-to-use, on-site processing solution.

Large capacity

The loading chamber has a capacity of 80 litres, i.e. 1 TESABOX 80 or 2 TESABOX 40 or 4 TESABOX 20.

Fully integrated system

The STERIPLUS™ 80 is a fully automated solution for pre-grinding and steam sterilization of infectious wastes.  
Technical Data
 
LOADING CHAMBER CAPACITY 80 L
LOADING CHAMBER USEFUL DIMENSIONS (W x D x H) 370 x 360 x 628 mm
LOADING CAPACITY (containers) 1 X TESABOX 80 or 2 X TESABOX 40 or 4 X TESABOX 20
TOTAL CYCLE TIME (NF X30-503-1 standard) (1) 30 to 35 min
TOTAL CYCLE TIME in working conditions (2) 30 to 50 min.
LOADING CAPACITY (KG/CYCLE) 6,4 to 9,6 kg/cycle - Based on an average waste density of 0,08 to 0,12kg/L for HealthCare Waste 9,6 to 16 kg/cycle- Based on an average waste density of 0,12 to 0,2kg/L for Lab/Humid/Liquid
TREATMENT CAPACITY (KG/H) (3) 8 to 12 kg/h - Based on an average waste density of 0,08 to 0,12kg/L for HealthCare Waste 12 to 20 kg/h - Based on an average waste density of 0,12 to 0,2kg/L for Lab/Humid/Liquid
MAX QUANTITY OF LIQUID RECOMMENDED PER CYCLE (4) 24 L
EXTERNAL DIMENSIONS (w x d x h) 1550 x 1200 x 1800 mm
NET WEIGHT 1300 kg
LOADING CHAMBER Stainless steel with PTFE coating
TREATMENT CHAMBER AISI 304L stainless steel
STEAM GENERATOR AISI 304L stainless steel (chamber) & Highly corrosion-resistant Hastelloy®
WATER SOFTENER Built-in
WATER BOOSTER PUMP AND AIR COMPRESSOR Built-in
WASTER SHREDDER Structure: AISI 304L stainless steel & Blades: High-strength steel
PIPING Stainless steel/PTFE flexible hosing
CHASSIS Painted steel
BODYWORK Composite material / Painted steel
CYCLE TRACEABILITY - THROUGH PRINTOUT Built-in
USB PORT Built-in
 
Utilities
WATER
Requirements Softened water (4-8°TH)
Consumption 15 liters / cycle
ELECTRICITY
Requirements 380-400 V III N, 50Hz/60Hz, 20 kW
Consumption 3 kWh/cycle
DRAIN ø 32 mm  internal (heat-resistant)
STEAM/COMPRESSED AIR Produced by the integrated steam generator and air compressor; no external connection required.
Accessories
           
Traction Table
The Traction Table is a 4 Section Traction with 2 motors, one for Hi/Lo Adjustment and the other one for Center Arching Mechanism. All four corners of EU300 Traction Table are supported by 3 inches swivel castors, one at each corner. 
Technical Specification:
  • Number of Motor - 2
  • Control Type - Hand Control/ Foot Control/ 2 or 3  Sides Elevating Bar
  • Minimum Height - 470mm/18.50" inch
  • Maximum Height - 910mm/ 35.83" inch
  • Table Top Width - 700mm/ 27.56" inch
  • Total Length - 2390mm/94.09" inch
  • Head Tilt Angle - -20° to + 80° 
  • Lift Mechanism - Electric
  • Breathing Hole/Plug - 1
  • Retractable Castors - 4
  • Weight Rating (Max.Load) - 225 kgs/496 lbs
  • Gross Weight - 2 kgs
  • Control Box Input Voltage & Rating (Max.Load) - 100-240 VAC, 50/60 Hz, 2A
Our Neeo “C” arms are easy to place, use and are specifically designed to be used in orthopedics, traumatology, abdominal surgery, urology, cardiology and operating rooms. Using Neeo with the RTP (Real Time Processing) option it is possible to perform vascular, urological and cardiological diagnostics. One of the main functions, digital image subtraction, allows to see, as an example, the passage of contrast liquids in a tissue or in a venous or arterial duct; thanks to the possibility of looping, the acquired video can be reproduced several times to monitor more accurately the passage of the fluid within the area in question. Angiographic measurement is another useful function in the vascular field (QA Quantitative Angiography) that allows the measurement of stenoses. Finally, fluoroscopy allows the correct positioning of stents or expanders. Neeo is used in various interventional and diagnostic procedures in traumatology and orthopedics wards and operating rooms as well. Thanks to low-dose fluoroscopy, it is possible to use the device for positioning bone or subcutaneous grafts, inserting K-wire (Kirschner wire) for stabilization of bone fragments or for the correct positioning of prostheses. The low dose emitted ensures safe use for both the patient and the surgeon or doctor on the operating field. On the control panel there is a large touch screen display that allows to adjust the basic functions of the equipment. From this display it is possible to select and adjust the fluoroscopic data for the examination, activate or deactivate the laser pointer, select between pulsed, one shot or standard fluoroscopy, rotate the image and perform all operations on collimator. The four side buttons on the display offer the possibility to move the bow vertically thanks to an extremely silent motor. Neeo has two 19 “medical grade monitors that can be positioned according to the needs of the medical practitioner. Work monitors and feedback monitors are separated to be managed independently. The possible movements are: rotation, revolution, tilting and possibility of height adjustment. Features:
  • Continuous fluoroscopy
  • Pulsed fluorography
  • One Shot fluoroscopy
  • Low dose fluoroscopy
  • Radiography with cassette (up to 5KW)
  • 110,000 images of memory (Standard)
  • 19 ″ Medical Flat Monitor (X2)
  • Touch control panel
  • Image Processing – 1K X 1K, 16 bit
  • DAP-Dose Area Meter
  • DSA Road Mapping
  • Laser Marker
Technical Specification:
  • Power: 5KW
  • kV Range (kV): 40 - 120
  • mAs Range (mAs): 1 - 250
  • SID (mm): 1000
  • Free Space (mm): 730
DICOM Feature:
  • RTP-SW DSA
  • RTP-SW QA
  • RTP-SW Worklist
  • RTP-SW Print
  • RTP-SW CD DVD Saving
  • RTP-SW MPPS
  • RTP-SW Query/Retrieve
  • RTP-SW HCF
  • RTP-SW BASE
  • RTP-SW STCOMMIT
Configuration: C-Arm Structure, Trolley for Monitor, Collimator, Monoblock, Toshiba 12” Image Intensifier, 19″ Philips Medical Flat Monitor (X2), Camera CD1030CA 1KX1K, Sony Printer UP-X898MD, Cassette Holder
Click Here To Download Catalogue
Features:
Technology of control: Microprocessor integrated with temperature sensors provides high precise control
Safety system:
Permanent running self-tests, 24 hours continuous operating Double independent over-heating protections and automatic cut off Visual and acoustic alarm for high temperature / low temperature/sensor fault
Dual channels:
Each channel can work independently with own temp. setting and temp control Two channels can be combined to enlarge the warming capacity Heating up to the patient: IV tube is completely wrapped in, no heat loss
User friendly interface:
Big LED screen showing set temp., actual temp., heating time and fault situation Easy and quick to set up, ready to use within minutes. Open system: Accepts standard IV tube, no special disposables needed The most economical warming solution without extra consumable costs TECHNICAL SPECIFICATIONS Model: FT2800 Temperature setting: 33 - 41˚C Power supply: a.c.100~240V/50~60Hz Power consumption: Max. 180VA Type of protection against electric shock: Class I Degree of protection against electric shock: BF Applied part; Defibrillation-protected Degree of protection against ingress of liquids: IPX2 Temperature accuracy: ±1.0˚C Overheat protection: 42˚C /43˚C Low temperature alarm: 32˚C Warming up time: From 20˚C to 36˚C approx.2 min. Operating mode: Continuous Dimension (W*D*H): 200×130×250mm Net Weight: 2.3kg Warming profile:  - length 1400mm - compatible IV tube 3.5-5.0mm O.D.  
Click Here To Download Catalogue 
Electronic wheelchair scale with integrated ramps on both sides. Two handgrips and transport castors allow an easy handling of the scale. The all steel construction provides extra stability and takes weight up to 300 kg. Features:
  • Unit switch kg/lbs
  • Automatic zero setting
  • Tare
  • Pre-tare
  • Hold function
  • BMI function
  • Low battery indication
  • Auto switch off
  • RS232 interface
  • Power supply: Mains and rechargeable batteries
Technical Specification:
Capacity
300 kg
Graduation
100 g
Units
kg, lbs
Dimensions weighing platform
800 x 800 mm
Dimensions overall
1070 x 1050 x 70 mm
Weight 45 kg
Bistos BT- 410 Medical Head Lamp - Head-worn light BT-410 provides not only comfortable wear but also convenient for use during examinations or operations. - Ultra bright LED light with High density LED - Easy to adjust head strap & an angle - Extensive LED lifetime (more than 50,000 hours) - More than 4 hours of continuous use - An additional astral LED lamp (optional) - Attachable loupe (optional). Features: Illumination Uniformity:
  • Multi-lens structure ensures high level of uniform luminance in its light spot.
Coaxial Design:
  • Light source is located between two eyes is able to cast least shadow on the surface.
  • Also, the luminance angle moves freely with pivot joint structure.
Interchangeable Battery:
  • Rechargeable battery is interchangeable. With additional battery, no need to worry anymore about remaining power.
Technical Specifications: Model - (BT - 410) Order code - 410F Illumination - (Standard - 15,000 - 30,000 lx) Adjustable Illumination - Yes Illumination Uniformity - High Adjustable Light Spot - No Light Spot Size (at 300mm) - 70mm Astral Lamp - No Color Temperature - 6,000 K LED Life Time - Appox. 50,000 hour Loupe: Type - Single Lens Magnification - 2 x Battery: Type - Lithum-ion Capacity - 3.7V / 2,200 mAh Run time - 4 hour Charging time - 4 hour Weight - 190 g Band Size - (540 - 640mm) Warranty - 1 year  
Click Here To Download Catalogue 
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • Rating
  • Price
  • Description
Click outside to hide the comparison bar
Compare