STERIPLUS 80

STERIPLUS  80

On-site infectious risk waste treatment solution

Features

Fully automated

Utilities

Accessories

• Maintenance parts kit STERIPLUS^TM
• System waste unloading system
• Adaptation to different voltages / frequencies
• Special packaging

Traction Table

Technical Specification:

• Number of Motor - 2
• Control Type - Hand Control/ Foot Control/ 2 or 3  Sides Elevating Bar
• Minimum Height - 470mm/18.50" inch
• Maximum Height - 910mm/ 35.83" inch
• Table Top Width - 700mm/ 27.56" inch
• Total Length - 2390mm/94.09" inch
• Head Tilt Angle - -20° to + 80° 
• Lift Mechanism - Electric
• Breathing Hole/Plug - 1
• Retractable Castors - 4
• Weight Rating (Max.Load) - 225 kgs/496 lbs
• Gross Weight - 2 kgs
• Control Box Input Voltage & Rating (Max.Load) - 100-240 VAC, 50/60 Hz, 2A

• General Surgery
• Office based Vascular Center
• Pain Management
• Orthopdics
• Urology
• Cardiac Procedures
• Hybrid OR
• Neuro & Spine Surgery
• Pain Management
• Orthopedic Surgery
• Trauma Procedure -Urology Procedure
• Cardiac Surgery
• Peripheral Artery Diseases -Vascular Surgery

• 260 x 260 mm CMOS Type Flat-Panel detector for distortion-free imaging (High resolution images, Wide FOV, Low Noise)
• 15kW HFG
• 4"Touch LCD monitor
• 43" LCD Monitor
• Dual Foot Switch
• DICOM 3.0 -CD/DVD Burner - USB Port
• 800mm free space and 150° (+90°,-60°) orbital rotation, SID 1,000mm
• 155º Dynamic Orbital Rotation
• 2 kW Stationary Anode X-Ray Tube
• 5 Million Images Storage Capacity

• With an optimal flat panel detector size of 26 x 26cm you won't miss a thing with its high quality resolution. It makes accurate diagnosis in a variety of departments especially DSA

• Low dose mode is desgined to acquire reasonable image to diagnose the patient with minimum dosage.

• For user to get more accurate diagnosis result enhancing edge of image.

• This function detects the movement and reduce the after image while exposing X-ray.

• To prevent over-dose radiation or low quality image casued by metal inturrption on field of view.

• The virtual collimator allows for the selection of your desired field of view, while reducing the amount of radiation exposure by limiting the X-Ray beam.

• Prevention of unncessary X-Ray exposure by focusing on the area of interest while autmoatically collimating the remaining areas.

• Convenient diagnostic functions for easy patient / image management
• Accurate diagnostic tools
• Improve the efficiency of your hospital management
• Perfect compatibility with all PACS
• A must have for a digitally equipped hospital
• Convenient communication and management for your customers
• Dicom Support

• Pairing fluoroscopy with constrast media to display the basic angiography views

• Selects the proper mask to apply and remove artifacts made by a patient's movement or breathing

• Processing: Improvement of the processed image after the DSA procedure

• After setting the position for a vessel, the subject can be placed back to their original position by using the shift function to compensate for any movement. Allows for various functions that assist with accurately inserting a catheter.

• Ability to diagnose a blood vessel with only a small amount of contrast media

• After setting a position for a vessel, the subject can be moved back to their original place by using the shift function to compensate for any movement. Provides various functions that helps accurately to insert a guide wire, catheter is compatible with the hybrid operating room.

• Obtain blood vessel type information while only using a small amount of contrast media

• Roadmap your vessels using a prevoiusly taken DSA image

• Re-position the roadmap mask by shifting the pixels to the proper position

Click Here To Download Catalogue

RZ LED iLumen EndoVue 24"

Features:

• • 1920x1200 (WUXGA), 518x324mm, 16:10
  • 178° viewing angle, 49 W
  • 24 inch TFT LCD (LED)
  • 1920 x 1200 pixel (WUXGA)
  • 2 x DVI-D
  • 1 x SD/HD/3G-SDI (BNC)
  • 2 x SOG
  • 1 x VGA (D-sub)
  • 1 x C-Video (BNC)
  • 1 x S-Video (DIN)
  • 1 x Component (RGBS, YPbPr) (5 x BNC)

Full HD Digital Camera System F 1 

Features:

• 3-Chip Full HD camera with latest MOS technology for brilliant picture quality
• Pure Natural Colors technology

• best possible picture transmission to medical grade monitors
• 3 programmable remote control buttons User-friendly multilingual menu allows a large variety of setups for individual procedures and surgeons preferences
• Full HD 60fps video recording
• Full HD image saving
• USB pen drive included
• Boost function
• On-screen-menu
• 3 user settings storable
• 5x digital zoom

LUMEN LED 1 High Intensity Light Source 180W

Features:

• More than 10.000h lamp lifetime
• Latest PHASER® – Technology
• Waterproof touch control panel
• High color rendering
• High luminance
• Daylight color temperature
• Low noise level
• No UV or IR light
• Low power consumption
• Video-IN terminal - 1 x VHS (BNC)

AIRFLOW A2 INSUFFLATOR

Feature:

• Gas Flow - 20L/min
• User-friendly interface
• Highest safety standard for patients
• Available with CO2 heating system
• Pre-insufflation mode for use with Verres Cannulas
• Non-heating unit features same gasflow rates as heating unit models
• Gas connection - UNF 7/16“ male
• Gas - Medical Grade Carbon Dioxide.

**SUCTION AND IRRIGATION PUMP P1000

Feature:

• Double roll pump for precise suction- and irrigation during Laparoscopic surgeries
• Also for extraction of smoke gases that arise when using lasers and HF devices
• Optional footswitch for comfortable operation during surgery
• Permits dispensing with mechanically sensitive trumpet valves that require elaborate cleaning
• Independently digital pre-settings for maximum suction and irrigation pressures
• Digital display of actual suction and irrigation pressures
• High efficiency with rates up to 3L/min
• Color coded tubing sets
• Standby function
• Irrigation Power - 0 - 3.0 ml/min
• Suction Power - 0 - 3.0 ml/min
• Pressure - 0 - 750 mmHg.

**DIATHERMY MACHINE 200W

Feature:

• Stable and Powerful Generators,
• Highest patient safety through REM system
• Digital value indicator of chosen power output
• Monopolar and Bipolar applications
• Activation through Hand- or Footswitch
• Safe application through color-coded membrane keypad
• Max output power CUT 200W – 250Ω
• Max output power ENHANCED 120W – 250Ω
• Max output power BLEND120W – 200Ω

• Max output power FORCED COAG 150W – 150Ω
• Max output power SOFT COAG 90W – 100Ω
• Max output power BIPOLAR COAG 80W – 50Ω
• Working frequency 600 kHz
• Patient circuit F
• Mains voltage 115-230 Vac
• Mains frequency 50-60 Hz

HIGH-END TROLLEY

Feature:

• Power columns for cables
• Endoscope Holder
• Variable height support arms
• Conductive rolls
• Optional doors and rear panel in order to protect valuable equipment
• Optional main on/off switch

Accessory

• Fibre Optic Light Guide Cable Ø 4,8mm, 3000mm
• Adaptor for Fibre Optic light guide Type RZ/Storz - connection to unit

Click Here To Download Catalogue 

1. Simplicity: easy to use, easy to take with your package anywhere.
2. Choice: adapt the equipment to your patients and procedures freely.
3. Patient Centered Ventilation: Precision in an anesthesia ventilator, from conventional ventilation to advanced modes, including 4 modes: CPAP; S; T; S/T.
4. Designed and manufactured by Perlong Medical with over 23 years experience in this area.
5. Flexible configurations to suit your needs.
6. International standard and advanced technology suitable for wide range use.
7. Compact interface and screen display give you better operating experience.
8. Over 2,000 units installed in the world.

1. TFT LCD screen displays the Ventilation parameters and alarming information.
2. Integration breathing circuit design, ensure easy operating and keep tidy.
3. Multiple working modes such as volume control and pressure limit, adapt to wide range patient.
4. Multiple parameters monitoring interface, make every parameter clear, let users know the patient conditions in all aspects;
5. Optimized design and fine manufacture, cooperating sound absorption composite, unique super mute design.
6. Unique shuttle knob design, easy to operate and use in house.
7. No need to add water by stopping the machine, very easy to use.

1. Three level alarming system, visual and sound alarm information.
2. With lots of alarming, reminding and protection functions.
3. Advanced power management control technology.