STERISHRED 700

Brands: Tesalys

~~$0.00~~

Shipped From Abroad

INTEGRATED SHREDDER- STERILIZER FOR HEALTHCARE WASTE

STERISHRED 700 is an advanced solution to perform safe biomedical waste treatment which reduces risks, volume/weight and disposal costs. It treats infectious healthcare waste by pre-shredding followed by a non-burn thermal process (steam sterilization) at 135°C, in just minutes! Compact but with large treatment capacity (up to 100 kg/h), it can be used for either on-site treatment or in centralized outsourcing facilities.

Click here to download Catalogue

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Sku:

SF103356013097-5

Tag:

Deal of the day

Brands:: Tesalys

Description
Reviews (0)

Description

Features

Very high treatment capacity

The STERISHRED® 700 offers an on-site treatment capacity of 40 to 100 kg/hour.

Fully automated

Its loading and unloading system is fully automated.

For large structures

It is the ideal solution for structures producing high quantities of infectious waste and wishing to reduce their environmental impact by treating them on site.

Technical Data

TOTAL CYCLE TIME	Approx. 35 to 50 min depending on steam generator version and load humidity
LOADING CAPACITY (KG/CYCLE)	40 to 100 kg/cycle (Based on an average waste density of 0,08 to 0,12 kg/l)
TOTAL CYCLE TIME IN WORKING CONDITIONS (2)	30 to 50 min
TREATMENT CAPACITY (KG/H) (3)	40 to 100 kg/h (Based on an average waste density of 0,08 to 0,2 kg/l)
LOADING CHAMBER	Stainless steel
TREATMENT CHAMBER	316L Stainless steel
STEAM GENERATOR	Stainless steel
WATER SOFTENER	Available as option (External)
WATER BOOSTER PUMP	Buit-in
WASTE SHREDDER	AISI 304L stainless steel (structure) Hardox® hard steel (blades)
PIPING	Stainless steel/PTFE flexible hosing
CHASSIS	Powder coated steel
BODYWORK	Stainless steel
CYCLE TRACEABILITY	Built-in printer
EXTERNAL DIMENSIONS	4000 mm x 4045 mm x 3890 mm – As an option, unit can be disassembled in three parts

Usage Data

WATER
Needs	Water 4-8°TH
Consumption	Approx. 75 liters/cycle (25L machine + 50L steam generator)
ELECTRICITY
Needs	380-400 V III N, 50/60 Hz, 80kW (other voltage / frequency available as option)
Consumption	10 kWh / cycle
DRAIN	2” Ø (heat resistant, floor level)
STEAM	Produced by the integrated steam generator, no external connection required
COMPRESSED AIR	Built-in, no external connection required

Reviews

There are no reviews yet.

Be the first to review “STERISHRED 700”

Quick Comparison

Settings STERISHRED 700 remove Yuwell 7F-10 Oxygen Concentrator remove RZ Medizintechnik Complete Endoscopy Stack remove Keewell Gel Warmer KGW-2 remove Siare ARIA 150 Turbine Ventilator remove Asco LCD Based Cervical Traction Machine remove

Name STERISHRED 700 remove Yuwell 7F-10 Oxygen Concentrator remove RZ Medizintechnik Complete Endoscopy Stack remove Keewell Gel Warmer KGW-2 remove Siare ARIA 150 Turbine Ventilator remove Asco LCD Based Cervical Traction Machine remove

Image

SKU SF103356013097-5 SF1033560090 SF1033560074 SF1033560086 SF1033560101- 5 SF1033560092

Rating

Price

~~$0.00~~

$759.00

~~$0.00~~

$175.00

~~$0.00~~

$319.00

Stock

Availability

Add to cart

Description

Shipped From Abroad

INTEGRATED SHREDDER- STERILIZER FOR HEALTHCARE WASTE

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad

KEY FEATURES

Full Plastic Outer Shell Makes it Durable & Safe.
The Angled Control Panel Makes it very Easy to Use & Multiple Safety Functions Like Power Failure Alarm, Pressure Relief Valve, High
Low Pressure Alarm & Thermal Protection.

Delivery & Availability: Typically 14 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad

RZ LED iLumen EndoVue 24"Features:
- 1920x1200 (WUXGA), 518x324mm, 16:10
- 178° viewing angle, 49 W
- 24 inch TFT LCD (LED)
- 1920 x 1200 pixel (WUXGA)
- 2 x DVI-D
- 1 x SD/HD/3G-SDI (BNC)
- 2 x SOG
- 1 x VGA (D-sub)
- 1 x C-Video (BNC)
- 1 x S-Video (DIN)
- 1 x Component (RGBS, YPbPr) (5 x BNC)

Delivery & Availability: Typically 14-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad

Shipped from Abroad ARIA 150 ventilator is a latest-generation lung ventilator on the trolley, suitable for an intensive care bed, with a turbine flow generator that makes it autonomous from compressed air. Delivery & Availability: Typically 19 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped from Abroad

Traction Machine The Traction Unit is the result of thousands of feedbacks from tens of thousands of physiotherapists over the past decade. Instead of a touch screen LCD panel and working through complicated windows, physiotherapists recommended the ease-to-adjust "HOLD" and "REST" knobs as they have been proven to be one of the fastest and effective ways of adjustments of traction force during treatment. The "HOLD" and "REST TIME" can be adjusted in real-time as well as the FORCE. Once set, press "START" and the new setting will take effect in the next coming cycle. The unit is equipped with a "Patient Switch" for full control of an Emergency Situation, all at the hands of a patient. Delivery & Availability: Typically 14-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Content

https://youtu.be/SqxG_EmfUiQ?si=-9pvDDxQ4qdpAgoC

Features

Very high treatment capacity

The STERISHRED® 700 offers an on-site treatment capacity of 40 to 100 kg/hour.

Fully automated

Its loading and unloading system is fully automated.

For large structures It is the ideal solution for structures producing high quantities of infectious waste and wishing to reduce their environmental impact by treating them on site.

Technical Data

TOTAL CYCLE TIME	Approx. 35 to 50 min depending on steam generator version and load humidity
LOADING CAPACITY (KG/CYCLE)	40 to 100 kg/cycle (Based on an average waste density of 0,08 to 0,12 kg/l)
TOTAL CYCLE TIME IN WORKING CONDITIONS (2)	30 to 50 min
TREATMENT CAPACITY (KG/H) (3)	40 to 100 kg/h (Based on an average waste density of 0,08 to 0,2 kg/l)
LOADING CHAMBER	Stainless steel
TREATMENT CHAMBER	316L Stainless steel
STEAM GENERATOR	Stainless steel
WATER SOFTENER	Available as option (External)
WATER BOOSTER PUMP	Buit-in
WASTE SHREDDER	AISI 304L stainless steel (structure) Hardox® hard steel (blades)
PIPING	Stainless steel/PTFE flexible hosing
CHASSIS	Powder coated steel
BODYWORK	Stainless steel
CYCLE TRACEABILITY	Built-in printer
EXTERNAL DIMENSIONS	4000 mm x 4045 mm x 3890 mm - As an option, unit can be disassembled in three parts

Usage Data

WATER
Needs	Water 4-8°TH
Consumption	Approx. 75 liters/cycle (25L machine + 50L steam generator)
ELECTRICITY
Needs	380-400 V III N, 50/60 Hz, 80kW (other voltage / frequency available as option)
Consumption	10 kWh / cycle
DRAIN	2” Ø (heat resistant, floor level)
STEAM	Produced by the integrated steam generator, no external connection required
COMPRESSED AIR	Built-in, no external connection required

KEY FEATURES

Full Plastic Outer Shell Makes it Durable & Safe.
The Angled Control Panel Makes it very Easy to Use & Multiple Safety Functions Like Power Failure Alarm, Pressure Relief Valve, High
Low Pressure Alarm & Thermal Protection.

Technical Specification:

Dimensions 37.2 x 68 x 44.5 cm.
Weight 33 kg
Flow range 5-10 litres per minute
The oxygen concentration is not lower than 95.5% – 87%.
Maximum discharge pressure 62 ± 4.5 kPa
There is a pressure reduction mechanism at 250 kPa ± 25 kPa.
Altitude: Up to 1,828 meters above sea level without reducing the intensity (at an altitude of 1,828-4,000 meters, efficiency will be below 90%).
Loudness ≤60 dB A
Uses 4 amperes (AC 220V-240V), input power is not more than 850 watts.

RZ LED iLumen EndoVue 24"

Features:

- 1920x1200 (WUXGA), 518x324mm, 16:10
- 178° viewing angle, 49 W
- 24 inch TFT LCD (LED)
- 1920 x 1200 pixel (WUXGA)
- 2 x DVI-D
- 1 x SD/HD/3G-SDI (BNC)
- 2 x SOG
- 1 x VGA (D-sub)
- 1 x C-Video (BNC)
- 1 x S-Video (DIN)
- 1 x Component (RGBS, YPbPr) (5 x BNC)

Full HD Digital Camera System F 1

Features:

3-Chip Full HD camera with latest MOS technology for brilliant picture quality
Pure Natural Colors technology

Multitude of digital video outputs for

best possible picture transmission to medical grade monitors
3 programmable remote control buttons User-friendly multilingual menu allows a large variety of setups for individual procedures and surgeons preferences
Full HD 60fps video recording
Full HD image saving
USB pen drive included
Boost function
On-screen-menu
3 user settings storable
5x digital zoom

Freeze function

LUMEN LED 1 High Intensity Light Source 180W

Features:

More than 10.000h lamp lifetime
Latest PHASER® – Technology
Waterproof touch control panel
High color rendering
High luminance
Daylight color temperature
Low noise level
No UV or IR light
Low power consumption
Video-IN terminal - 1 x VHS (BNC)

Color temperature - 6000 – 6500° K

AIRFLOW A2 INSUFFLATOR

Feature:

Gas Flow - 20L/min
User-friendly interface
Highest safety standard for patients
Available with CO2 heating system
Pre-insufflation mode for use with Verres Cannulas
Non-heating unit features same gasflow rates as heating unit models
Gas connection - UNF 7/16“ male
Gas - Medical Grade Carbon Dioxide.

**SUCTION AND IRRIGATION PUMP P1000

Feature:

Double roll pump for precise suction- and irrigation during Laparoscopic surgeries
Also for extraction of smoke gases that arise when using lasers and HF devices
Optional footswitch for comfortable operation during surgery
Permits dispensing with mechanically sensitive trumpet valves that require elaborate cleaning
Independently digital pre-settings for maximum suction and irrigation pressures
Digital display of actual suction and irrigation pressures
High efficiency with rates up to 3L/min
Color coded tubing sets
Standby function
Irrigation Power - 0 - 3.0 ml/min
Suction Power - 0 - 3.0 ml/min
Pressure - 0 - 750 mmHg.

**DIATHERMY MACHINE 200W

Feature:

Stable and Powerful Generators,
Highest patient safety through REM system
Digital value indicator of chosen power output
Monopolar and Bipolar applications
Activation through Hand- or Footswitch
Safe application through color-coded membrane keypad
Max output power CUT 200W – 250Ω
Max output power ENHANCED 120W – 250Ω
Max output power BLEND120W – 200Ω

Max output power FORCED COAG 150W – 150Ω
Max output power SOFT COAG 90W – 100Ω
Max output power BIPOLAR COAG 80W – 50Ω
Working frequency 600 kHz
Patient circuit F
Mains voltage 115-230 Vac
Mains frequency 50-60 Hz

Electrical input power 350 VA

HIGH-END TROLLEY

Feature:

Power columns for cables
Endoscope Holder
Variable height support arms
Conductive rolls
Optional doors and rear panel in order to protect valuable equipment
Optional main on/off switch

Accessory

Fibre Optic Light Guide Cable Ø 4,8mm, 3000mm
Adaptor for Fibre Optic light guide Type RZ/Storz - connection to unit

TV-adapter for RZ HD 3-Chip camera f=28mm, C-Mount, soakable

Click Here To Download Catalogue

A typical complaint in ultrasound procedures is the cold ultrasound gel. This device can safely heat the ultrasound gel to the body temperature. By this way it can remove the uncomfortable cold feeling of the patients, help the patients more relaxation to the diagnosis. At the same time, it can also improve the performance of the ultrasound gel, increase the image and signal quality. FEATURES: High bright LED display Adjustable temperature control range 34-40℃ Programmable timer to switch on and switch off 360 degree surround heater unit Digital temperature control technology High energy efficiency Ergonomic design Built-in durable waIl mountable construction STANDARDS CONFORMED TO: EN 55014-1: 2006+A1:2009 EN 55014-2: 1997+A2:2008 EN 61000-3-2: 2006+A2:2009 EN 61000-3-3: 2008 EN 60335-1: 2002+A1:2004+A11:2004+A12:2006+A2:2006+A13:2008+A14:2010 EN 62233:2008 SPECIFICATIONS: Power Supply: AC100-240V, 50/60Hz, 30VA; DC12V, 2A Operating Ambient Temperature: 0-40℃ Operating Relative Humidity: 30-90% Temperature Control Range: 34-40℃ Temperature Control Accuracy: ± 1℃ (After Heat Balance) Auto Switch On Timer: 00:00-23:59 Auto Switch Off Timer: 00:00-23:59

ARIA 150 Ventilator is the latest-generation lung ventilator on the trolley, suitable for an intensive care bed, with a turbine flow generator that makes it autonomous from compressed air. Equipped as standard with a large 15” touch screen, ARIA 150 ventilator is able to offer a wide range of operating modes suitable for invasive and non-invasive ventilations of adults, children and newborns. The system allows to precisely set and analyzes tidal volumes starting from 2 ml up to 3000 ml. Great ability to compensate leaks and to deliver a maximum flow of over 240 l/min with and without pressure support.

Click Here To Download Catalogue

Traction Machine

The Traction Unit is the result of thousands of feedbacks from tens of thousands of physiotherapists over the past decade. Instead of a touch screen LCD panel and working through complicated windows, physiotherapists recommended the ease-to-adjust "HOLD" and "REST" knobs as they have been proven to be one of the fastest and effective ways of adjustments of traction force during treatment. The "HOLD" and "REST TIME" can be adjusted in real-time as well as the FORCE. Once set, press "START" and the new setting will take effect in the next coming cycle. The unit is equipped with a "Patient Switch" for full control of an Emergency Situation, all at the hands of a patient.