Sugentech Inclix Pct Test Kit

• INCLIX™ PCT Test quantitatively measures Procalcitonin (PCT) concentration in serum and plasma using the INCLIX™ analyzer. For in vitro diagnose use only.
• Procalcitonin (PCT) is reliable and specific biomarker to diagnose bacterial infection and sepsis. Because bacterial infection progresses rapidly to severe systemic infection, early diagnosis is important for appropriate clinical treatment. It has been shown that PCT can contribute to optimization of antibiotic therapy and monitor treatment duration.
• INCLIX™ PCT Test is a rapid test based on immunochromatography technique “lateral flow”V using highly specific monoclonal antibodies. The detection antibody-gold conjugate and PCT leads to the generation of a reddish colored band on the strip. The intensity of the band depends on quantity of PCT molecules and is analyzed by INCLIX™ analyzer for quantitative readout.

• Indicator light indicates working state.
• For 4~6 minutes rapidly sterilizing.
• Sterilizing temperature and time can be preset.
• Steam-water inner circulation system: no steam discharge, and the environment for sterilizing will be clean and dry.
• Over temperature & over pressure auto-protection.
• Safe protection of water lacking.
• Exhaust the cool air automatically.
• With three stainless steel sterilizing plates.
• The chamber of the sterilizer is made of stainless steel.
• Automatically shut off with beep reminding after sterilization.

• Speed: 11,800rpm with 24- place rotor
• RCF: 14,000g with 24-place rotor
• Acceleration: 0-11,800rpm in 60 seconds, with 24-place rotor
• Brake: Automatic
• Noise: 62dB running with 24-place rotor
• Motor: High precision AC/DC series wound motor, brush gear, computer wound coil winding, balance armature and high speed bearings.
• Timer: 0-15 minute timer, graduated in 1 minute increments. Automatic switch at zero
• Weight: 5.1Kg net (without rotor)
• Dimensions: 23.5cm height x 27cm diameter, footprint 16cm diameter
• Construction: Aluminium casing with a steel lid
• Finish: Body cream white baked enamel, with matt black baked enamel lid

Click Here To Download Catalogue

• LCD Backlight
• Small Blood Sample
• Splash Proof
• Strip Ejection
• Hgb/Hct
• Fast Result

• Measurement Range: 0-24.0 g/dL
• Power Supply: 3A battery X 2
• Testing Time (seconds): 5 seconds
• Sample Volume (μL): 1 μL
• Memory Capabilities: 100 sets with date and time
• Operating Temperature (°C): 10 °C~40 °C

Click Here To Download Catalogue

• Results in 20 Seconds

• 100µL sample drawn directly from primary EDTA tube

• Fully automated, walk-away operation

• Random access

• Positive patient identification via internal barcode reader

• Compatible with pediatric tube

   

• Auto zero function: Manual blanking not required
• Dual wavelength measurement system:
• 2 wave lengths 455nm and 575nm
• Plays major role to remove the interference caused due to Hemolysis & turbidity of sample
• LED Light source:
• LED does not require replacement as it lasts longer
• As compared to Lamp, LED are more suitable as there is no intensity fluctuations
• No warm up time required.
• Flexible unit selection:
• Two units either mg/dl or umol/L are selectable, ease of reporting
• Compact slot for Capillary:
• Accuracy of results are directly related to proper alignment of Capillary
• B-111 has the easiest mode to ensure precise values
• Data transfer:
• External device can be connected to instrument through RS232 por
• USB port

• Light source - LED
• Wavelength - 455nm and 575nm
• Net weight - 1kg
• Measuring range - 0-30 mg/dl , 510 umol/L
• Display - 16×2 LCD module with backlight
• Auto calibration - Yes
• Sample type - Serum or plasma
• Sample volume - 40-80μL
• Test time - <5sec
• Units - mg/dl or umol/L
• Dimensions - 150 (W) × 115 (H) × 190 (D) mm
• Interface - RS232
• Reading cuvette - Heparinized micro capillary holder
• Storage temperature - 15-40°c
• Power supply - DC 9V(DC adapter)
• Power consumption - <2W