Anaesthesia Machine Model 50

Features

• Contains Output interface for Anesthesia information management system.
• Complete with backup battery for working more than 120 minutes.

• Built-in 10.4” color anesthesia ventilator

• Traditional CO₂ absorber (autoclavable, Patent)

• Dual high-end precise vaporizers (Volume > 280ml)

• Three gas sources system (O₂/N₂O/Air)

• Continuous FiO₂ monitoring & bain circuit interface

• Electronic tidal volume (Innovation)

• Battery backup for all systems over 60 mins

• Optional: Backup Yoke system (O₂, N₂O)

• Optional: Anesthesia gas scavenging system

• Optional: Anesthesia gas modular patient monitor

• Structure made of ABS

• Large pressure gauges for easy reading

• CO₂ absorber with easy changeover system

• Optional: Yoke system for backup 1×O₂, 1×N₂O A-Type cylinder

Safety Features

• Gases interlocking system with hypoxy guard

• Oxygen exhaust alarm

• Blow-off valve in top circuit

Technical Specification

Anaesthesia main unit

• High resolution 10.4" color TFT LCD screen

• Dual-end pressure flow sensor, the unit can monitor Tidal Volume, Respiratory frequency, airway pressure, pressure-time wave, flow-time wave (two-way), High Pressure limitation, Low Pressure limitation, Apnea, Oxygen concentration under both two operating modes (Auto, Manual)

• Respiration loop function

• Close, semi-close, semi-open

• Application: Adult, Pediatric

• Low gas alarming: It gives an alarm if it lasts more than 7 seconds.

• High pressure Limitation: Whenever airway pressure exceeds the pre-set High pressure, the ventilator offers automatic protection to ensure patient safety.

• Low pressure protection: Once O₂ pressure is less than 0.1MPa, N₂O gas supply stops automatically.

• Power failure alarming, power extendable function

• O₂ flush: 25 ~ 75L/min

• Gas Pressure:

  • O₂: 0.3 ~ 0.5MPa

  • N₂O: 0.3 ~ 0.5MPa

  • AIR: 0.3 ~ 0.5MPa

• Power: 220V±10%, 50Hz±1%; Backup USP Battery.

• Optional: Yoke system for backup O₂, N₂O cylinders

Flow meter

• O₂, N₂O, AIR – six tubes (0.05 ~ 1 L/min, 1 ~ 10L/min)

• O₂/N₂O inter-lock system, to keep O₂ concentration no less than 25%

Anaesthesia Ventilator

• Adult, Pediatric bellows 1 set each

• Pneumatic-driven electric control

• Monitor Parameters: Tidal volume, Respiratory frequency, I:E rate, M.V., FiO₂, Apnea, Peak airway pressure, airway pressure waves (P-T, F-T) etc.

• Working mode: Manual, Auto (IPPV, SIMV, A/C, SIGH, PCV, PSV, Demo.)

• Tidal volume: 50 ~ 1500 mL

• Respiratory frequency: 4 ~ 99 bpm

• I:E Ratio: 1.0:5 ~ 1:8 (adjustable)

• Synchronizer trigger Pressure: -2 ~ 0 kPa

• High pressure limitation: 2 ~ 6 kPa

• Low pressure limitation: 0 ~ 2 kPa

Respiratory Circuit

• Consolidated compact CO₂ absorber (autoclavable).

Vaporizer

• High-end precise vaporizer (Halothane, Isoflurane, Sevoflurane)

• Halothane/Isoflurane adjustable range: 0.5 ~ 5% VOL

• Sevoflurane adjustable range: 0.5 ~ 8% VOL

• Automatic compensation function – flow, pressure, temperature

• Self-lock function & inter-lock function

• Volume: >280 ml

• Weight - 105 kg
• Dimensions - 92 cm Wide x 68 cm Deep x 139 cm High (93 cm to the table surface)
• Packaging Dimensions - 105 cm Wide x 75 cm Deep x 160 cm High
• Operating voltage supply - 110 to 240 V~, 47 to 63 Hz (12 to 6 A)
• Power input - 120 W typically (max. 1.2 kW with auxiliary outlets used)
• Battery autonomy - 90 min typically
• Auxiliary power outlets - 4, with automatic protection
• O₂, N₂O and Air supply - 2.7 to 6.9 bar (39.1 to 100 psi)
• Screen - TFT 18.5" (47 cm) projected capacitive touchscreen
• Protection class - Class I, gas analyser type BF defibrillation proof
• Classification - Class II b
• Storage - One front drawer with self-brake system and two back cabinets with door
• Lighting - LED bar below the screen controlled from the touchscreen
• Auxiliary integrated systems - Auxiliary 02 flow meter (0-15 L/min), Auxiliary 02 suppy valve (NF standard) and Suction device
• Communication ports - 1 x RS-232, 2 x USB, 1 x LAN Ethernet

• Fresh gas flow - 0 and 0.1 to 18 L/min 02/N20/Air
• Accuracy - 0.1 to 0.5 L/min = ±0.05 L/min; 0.5 to 18 L/min = ±10 %
• 02 concentration - 21 to 100% vol. with Air, 25 to 100% with N20 (minimum 200 ml/min 02)
• 02 Safety fresh gas (backup) - 0-0.2-0.4-0.7-1-1.5- 2- 3- 4- 6- 8-10-12-15 L/min 02
• 02 flush (+02) - 40 L/min standard (adjustable 25 - 75 L/min upon requirement)

• Autoclavable - 134 °C
• Weight of breathing system - 9.8 kg
• C02 absorber volume - 1.5 L
• Leakage - < 150 mL/min (at 30 hPa)
• Pressure limiting valve APL - 0 to 70 hPa
• Pressure relief valve - 125 hPa
• Vacuum safety valve - 0.3 hPa
• resistance at 60L/min - 5.80 hPa
• resistance at 60L/min - 2.90 hPa
• resistance at 30L/min - 3.55 hPa
• resistance at 30L/min - 0.89 hPa
• Internal Compliance at 30 hPa - 15 mL

• Volume Controlled Ventilation (VCV)
• VC Synchronized Intermittent Mandatory Ventilation (VC-SIMV)
• VC-SIMV with Pressure Support (VC-SIMV-PS) *

• Pressure Controlled Ventilation (PCV)
• PC Synchronized Intermittent Mandatory (PC-SIMV)
• PC-SIMV with Pressure Support (PC-SIMV-PS) *

• Adaptive Pressure with Volume Guaranteed (APVG) *
• APVG Synchronized Intermittent Mandatory (APVG-SIMV) *
• APVG -SIMV with Pressure Support (APVG-SIMV-PS) *

• (other trade names: PS, ASB, SPS, IPS)

• Manual ventilation through the CABS system (Auto/Manual software controlled)
• Spontaneous ventilation either through the bellows (auto mode) or through the bag
• (manual mode) Manual ventilation through the external fresh gas outlet for non-rebreathing systems (Bain, Mapleson, ...)

• Tidal volume - 5 to 1500 mL
• Inspiratory pressure - 0 to 68 hPa
• Ventilation frequency ­- 3 to 120/min
• Inspiratory time - 0.05 to 16.6s
• l:E ratio - 5:1 to 1:8
• Inspiratory pause - 0 to 60%
• Inspiratory flow - max. 150 L/min
• PEEP - 0 to 30 hPa
• Flow trigger - 0.2 to 15 L/min
• Pressure support - 5 to 50 hPa
• Ramp time - 0.1 to 2 s
• Maximum pressure - 0 to 68 hPa

• 5" (47 cm) projected capacitive touchscreen, supported on a 360° rotating and 2 axis tilting arm.
• Measurements displayed: Peak pressure; Plateau pressure; Mean pressure; Expiratory minute ventilation; Expiratory tidal volume; Inspiratory tidal volume; Expiratory volumeter; Breathing rate; Compliance and Resistance (in VC modes); Patient info (age, weight, MAC, Class ASA); Connected sensors; Battery status; Power supply status; Gases supply pressures for 02, N20 and Air; Inspiratory and expiratory concentration of 02, N20, C02 and Anaesthetic gas*
• Parametres charted as curves (up to 3 simultaneously): Airway pressure; Expiratory flow; Inspiratory flow; Volume; Fresh gases (Rotstyle); Concentration of 02, N20, C02 and Anaesthetic gas*; Trends: Minute volume, MAC and gases (02, N20, C02 and Anaesthetic gas).
• Display for the performance of the hospital Anaesthetic Gas Scavenging System (AGSS).
• Configurable interface: bright/dark, multi-language.
• Loops (up to 2 simultaneously): Volume-Pressure, Flow-Volume, Pressure-Flow, C02-Volume.
• Fresh gas virtual rotameters for 02, N20, Air. * C02, N20 and Anaesthetic gas monitoring with the accessory multigas analyzer main-stream or side-stream; 02 real-time monitoring via paramagnetic

Click Here To Download Catalogue

• Epidural needle 16G,
• Epidural catheter,
• Epidural filter 0.2 um,
• Catheter connector,
• LOR syringe

• Contains Output interface for Anesthesia information management system.
• Complete with backup battery for working more than 30 minutes.

Click Here To Download Catalogue