View cart “Conical Glass Flask 500ml” has been added to your cart.

Chemistry-Experiments / Health Education

Ax60+ Kiosk

Brands: Analox

~~$0.00~~

Shipped From Abroad

Key Features

Low maintenance
Quick Connect System
Pre-wired, ready to go
Can support up to 4 alarm units
Push button for unit testing

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Sku:

SF1033560130141-6

Brands:: Analox

Description
Reviews (0)

Description

CO2 MONITOR & ALARM DESIGNED FOR KIOSKS

The Ax60+ Kiosk is a CO2 monitor and alarm specifically designed by Analox to alert personnel to a build up/leak of CO2 using a state-of-the-art infrared sensor. The alarm provides both audio and visual alerts in the case of increased levels of carbon dioxide (CO2). Up to four alarms can be added as needed and the unit does not need periodic calibration.

CO2 monitoring with the AX60+ Kiosk

The Ax60+ Kiosk is a smaller version of the popular Ax60+ carbon dioxide (CO2) monitor. It is simple to wall mount in the area where carbon dioxide (CO2) is stored or piped.

The Ax60+ Kiosk sensor needs to be installed at a height of 12-18 inches (305-457mm) above the floor – this is because the carbon dioxide (CO₂) that leaks from a gas cylinder is denser than ambient air and can collect at low levels. The alarm should be located above the sensor at about head height or at the entrance to the kiosk.

Technical Specification

Sensor Unit


Gas detected	Carbon Dioxide (CO2)
Sensor technology	Infrared
Range	0.1% to 5%
Default alarm set-points	USA regulations (NFPA 55, IFC, NBIC, OSHA and NIOSH): TWA – 5,000ppm (0.5%) AL1 – 5,000ppm (0.5%) AL2 – 15,000ppm (1.5%) AL3 – 30,000ppm (3%) International/European regulations (EH40) (DIN 6653-2:2015-06 compliant, assessed by TUV): TWA – 5,000ppm (0.5%) AL1 – 15,000ppm (1.5%) CO2 – 30,000ppm (3%)
Warm up time	40 Seconds
Resolution	0.01%
Accuracy	±2.5% of the alarm levels
Response Time	30 seconds to T90
IP Rating	IP55
LED indicators	Green = Power

Alarm Unit


Strobe	White LED strobe, with an option to change to blue, red or amber filter.
Sounder	min 80 dBA @3 m (9.8 feet)
IP Rating	IP55
LED indicators	Green = Power, Amber = Fault
Cable	2m included

Reviews

There are no reviews yet.

Be the first to review “Ax60+ Kiosk”

Quick Comparison

Ax60+ Kiosk remove Super-Full Touch Screen Water Purification System remove DISTRIBUTED ATMOSPHERE MONITORING SYSTEM remove Pipette Holder remove PERSONAL CO2/O2 MONITOR-ASPIDA remove COMPRESSED BREATHING AIR MONITOR remove

Name Ax60+ Kiosk remove Super-Full Touch Screen Water Purification System remove DISTRIBUTED ATMOSPHERE MONITORING SYSTEM remove Pipette Holder remove PERSONAL CO2/O2 MONITOR-ASPIDA remove COMPRESSED BREATHING AIR MONITOR remove

Image

SKU SF1033560130141-6 SF1033560130126-3 SF1033560130141-14 SF1033560084-148 SF1033560130141-11 SF1033560130141-3

Rating

Price

~~$0.00~~

~~$0.00~~

~~$0.00~~

~~$0.00~~

~~$0.00~~

~~$0.00~~

Stock

Availability

Add to cart

Description

Shipped From Abroad

Key Features

Low maintenance
Quick Connect System
Pre-wired, ready to go
Can support up to 4 alarm units
Push button for unit testing

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad The Super series uses city tap water as the water source, and can easily and quickly produce secondary RO (reverse osmosis) water, EDI deionized water and UP ultrapure water. It uses a standard two-stage reverse osmosis system and Ionpure EDI technology and modules to continuously produce Class II pure water with a TOC of more than 10MΩ.cm (25℃) and <30ppb, and ultrapure water of 18.2MΩ.cm (25℃). System water output: 10 liters/hour, and the daily output of pure water can reach 240 liters.

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad

Key Features

Optional Submarine PMS (Platform Management System) integration
Customized user interface/HMI
Datalogging
Download port
Visual alarms with alarm location
Password protection
Choice of gas sensing modules: oxygen (O2), carbon dioxide (CO2), carbon monoxide (CO), hydrogen (H2) and refrigerants
Local visual alarms
Optional relays
Temperature compensated
User maintainable
Partial pressure sensing
MIL-STD-461F compliant

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock The linear and round stands have been designed to fit perfectly of TOPTION Pipette range, TopPette,MicroPette and MicroPette Plus Autoclavable Pipettes. The stands are convenient to hold up 6 pipettes both of single and multi-channel.

Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad

Key Features

IP65 rated, ensuring the unit is dust tight and protected against water
Data logging capability
Man down alarm
Time Weighted Average (TWA) monitoring
Rechargeable batteries
Intelligent software – up to 2 users registered to one unit
User changeable alarms
We recommend: 23.5% for oxygen (O2) enrichment (As per NHS SOPS/EH40/OSHA); 19.5% for oxygen (O2) deficiency 0.5%; & 1.5% for carbon dioxide (CO2) enrichment

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad

Key Features

Provides continuous monitoring 24/7
Low maintenance and is easy to install and maintain
Provides 90 days of datalogging which you can easily retrieve via a USB connection
Cost effective alternative to colorimetric tube testing
Supplied as either a fixed or portable version depending upon your needs
Can be used on any breathing air compressor
Digital display

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Content

CO2 MONITOR & ALARM DESIGNED FOR KIOSKS

The Ax60+ Kiosk is a CO2 monitor and alarm specifically designed by Analox to alert personnel to a build up/leak of CO2 using a state-of-the-art infrared sensor. The alarm provides both audio and visual alerts in the case of increased levels of carbon dioxide (CO2). Up to four alarms can be added as needed and the unit does not need periodic calibration.

CO2 monitoring with the AX60+ Kiosk

The Ax60+ Kiosk is a smaller version of the popular Ax60+ carbon dioxide (CO2) monitor. It is simple to wall mount in the area where carbon dioxide (CO2) is stored or piped. The Ax60+ Kiosk sensor needs to be installed at a height of 12-18 inches (305-457mm) above the floor – this is because the carbon dioxide (CO₂) that leaks from a gas cylinder is denser than ambient air and can collect at low levels. The alarm should be located above the sensor at about head height or at the entrance to the kiosk.

Technical Specification

Sensor Unit


Gas detected	Carbon Dioxide (CO2)
Sensor technology	Infrared
Range	0.1% to 5%
Default alarm set-points	USA regulations (NFPA 55, IFC, NBIC, OSHA and NIOSH): TWA - 5,000ppm (0.5%) AL1 - 5,000ppm (0.5%) AL2 - 15,000ppm (1.5%) AL3 - 30,000ppm (3%) International/European regulations (EH40) (DIN 6653-2:2015-06 compliant, assessed by TUV): TWA - 5,000ppm (0.5%) AL1 - 15,000ppm (1.5%) CO2 - 30,000ppm (3%)
Warm up time	40 Seconds
Resolution	0.01%
Accuracy	±2.5% of the alarm levels
Response Time	30 seconds to T90
IP Rating	IP55
LED indicators	Green = Power

Alarm Unit


Strobe	White LED strobe, with an option to change to blue, red or amber filter.
Sounder	min 80 dBA @3 m (9.8 feet)
IP Rating	IP55
LED indicators	Green = Power, Amber = Fault
Cable	2m included

Performance characteristics

New 7.0-inch color touch screen

The new 7-inch color 16:9 widescreen high-resolution full touch screen control system provides a new fingertip touch operation experience.

4-channel water quality and 3-channel flow monitoring on the host

Source water, secondary RO water, EDI deionized water, UP ultrapure w

The lab optimized standard two-stage reverse osmosis system

The use of dual pumps, dual membranes and transition water tanks reduces system energy consumption and wastewater, ensuring stable water quality under different source water conditions.

ater, 4-way water quality online monitoring and water quality exceeding standard alarm function.

1-way source water flow statistics, EDI deionized water and UP ultrapure water 2-way high-precision quantitative water extraction function.

Standard-50L PE pure water tank

The polyethylene pure water tank with conical bottom design contains an air filter, which can effectively absorb CO2, organic matter and filter bacteria and particles, and can be equipped with UV ultraviolet irradiation sterilization components.

Features and Advantages

Built-in 3-pump system with primary and secondary RO booster pumps and circulation disinfection pumps to achieve complete two-stage reverse osmosis, system circulation and disinfection functions
Full-level filter element alarm prompt function based on time and flow, showing the used and remaining life of consumables
Automatic detection and alarm functions such as system water shortage alarm, water tank full alarm, water quality exceeding standard alarm, consumable life end alarm, water leakage protection alarm, etc. provide safety guarantee
Fully automatic RO membrane anti-scaling flushing program (flushing interval and duration can be set) to extend the service life of the RO membrane
Built-in SD card, can store and view operation data charts and curves, and can be inserted into a USB flash drive for complete data export, providing data traceability
With USB interface system program upgrade function, and optional WIFI module
Built-in perpetual calendar clock, convenient for consumables management and service settings
Ultrapure water full pipeline dosing disinfection function, just add disinfection tablets to start the one-key disinfection program to ensure high-quality pure water
Ultrapure water circulation function, which can be started and shut down freely to maintain low bacterial contamination level in the system
Factory and customer secondary passwords, system parameter settings are all password protected to prevent unauthorized changes
Compatible with 2 pure water storage methods of pressure water barrels to meet different application needs
High-strength all-engineering plastic chassis, ergonomic design, beautiful appearance, no corrosion and rust, ensure the cleanliness of the machine body, in line with GLP specifications
Unique 4-door design, pretreatment, RO and ultra-purification components, EDI and TOC modules, water tanks and control components adopt independent modular structures, making system maintenance more convenient
Pipes and joints are NSF certified to minimize TOC precipitation in the system and ensure the highest pure water quality
Powerful pre-treatment components, combined with 5μm PP transparent filter, KDF composite filter, coconut shell water-washing grade precision activated carbon filter, effectively protect the RO membrane
DOW RO reverse osmosis membrane, RO membrane components optimized by The lab, achieve the combination of long life, stability and high desalination rate of RO membrane
The new integrated ultra-purification component of DOW resin ensures that the water produced reaches 18.2MΩ.cm and reduces TOC precipitation
Ultra-long life 254&185nm dual wavelength UV lamp, combined with medical grade 316L flow hood, effectively sterilizes, reduces TOC, and enhances the system's application range
UF ultrafiltration components, molecular weight cut-off: MWCO5000D, effectively remove pyrogens/endotoxins, can be used for precision cell culture and IVF
Double-layer terminal sterilizing filter, accuracy: (0.45+0.1)μm, using PES polyethersulfone composite filter membrane, double-layer filtration design to ensure the terminal effluent is sterile

Technical Parameters

name	Basic	Heat removal prototype	Low organic matter type	Comprehensive	Built-in TOC monitor
model	Super 10	Super 10F	Super 10V	Super 10FV	Super-TOC10V	Super-TOC 10FV
Pure water output	10 L/hour
Ultrapure water output	Up to 2.0L/min (when there is water in the water tank)
Ultrapure water index
Resistivity (25℃)	18.2MΩ.cm
Total Organic Carbon TOC*	<10ppb	<10ppb	<3ppb	<3ppb	<3ppb	<3ppb
bacteria	<0.01cfu/ml
Particles (>0.1μm)	<1/ml
Pyrogens/endotoxins	N/A	<0.001Eu/ml	N/A	<0.001Eu/ml	N/A	<0.001Eu/ml
RNases	N/A	<1pg/ml	N/A	<1pg/ml	N/A	<1pg/ml
Deoxyribonucleases (DNases)	N/A	<5pg/ml	N/A	<5pg/ml	N/A	<5pg/ml
Pure water index
Resistivity*	>5MΩ.cm
Total Organic Carbon (TOC)*	<30ppb
Silicon Rejection Rate	>99.9%
Source water requirements	Urban drinking tap water, water temperature 5-45℃, water pressure 1.0-4.0Kgf/cm2
Size and weight	Length × width × height: 545 × 470 × 649 mm, weight: about 35 kg
Electrical requirements	220-240V, 50/60Hz
power	240W
System Configuration	Host (including 1 set of purification column) + TOC monitor (TOC type) + 50L PE ultrapure water storage tank

Description

The DAMS (Distributed Atmosphere Monitoring System) is a flexible, robust and fully configurable, submarine atmosphere monitoring system. Designed with you in mind, this life-saving, mission critical equipment offers multi-point sensing for AIP or Diesel Electric subs and is suitable for new submarine designs or mid-life upgrades.

Gas sensors are monitored centrally via the PLC and offer local sensing and alerts for the crew in the aft, middle and fore of your boat, giving you true peace of mind throughout the duration of your patrol.

Technical Specification

DAMS SPECIFICATION


Operating Pressure	700 to 1300mBar
Operating Temperature	0 to +45°C
Data logging	90 days of data
Power	24V DC as standard
Calibration	Before Mission and/or every 3 months

Characteristics

Flexibility

No matter a submarine’s size or what country’s flag it flies, it is a fact that no two submarines are the same. Every vessel has unique gas monitoring needs and requires an analytical tool with the versatility to be configured to each vessel’s individual requirements. Each state-of-art DAMS unit is flexible, robust and fully configurable and can monitor up to six different gasses simultaneously from one centralized PLC (programmable logic controller) panel.

Communication

Easily the most versatile and customizable product in the entire Analox line, DAMS quite simply is a centralized hub that allows multiple analyzers and monitors located in multiple locations throughout a submarine to communicate with each other. With the integral communication to the ships platform management systems, should an alarm be triggered, the duty officer is ideally positioned and instantly informed to take appropriate corrective action without having to leave the Con, or central control room.

Testing

The modular design of the DAMS incorporates multiple testing technologies including GFC to monitor carbon monoxide (CO), electrochemical for depleted or enriched oxygen (O2), NDIR for carbon dioxide (CO2) and refrigerants (R134a) and Catalytic Bead technology to test for hydrogen (H2). Each DAMS monitor is ideally suited for conventionally powered diesel/electric powered submarines or air-independent propulsion (AIP) designs.

Each DAMS unit is shock, pressure and temperature compensated and tested to withstand the demanding submarine environment. This highly versatile tool can be tailored to customer-specific requirements for EMC (electro-magnetic capability), durability, vibration and noise interference. Having successfully passed rigorous sea trials and laboratory testing, DAMS units are currently deployed with multiple naval groups throughout the world. In response to highly precise military standards and requirements, DAMS is simple to customize and install. Each unit is user maintainable, and has delivered the proven accuracy and reliability demanded by the submarine community. The modular design of DAMS allows for upgrades and changes to the system as the vessel’s operational requirements change throughout the product’s operational life.

Easy Calibration

Each DAMS system can be calibrated by just one person and is extremely easy to maintain, reducing and often eliminating disruptions to normal operations. Analox also offers multi-gas sensors that can be calibrated simultaneously.

Click here to download Data Sheet

The linear and round stands have been designed to fit perfectly of TOPTION Pipette range, TopPette,MicroPette and MicroPette Plus Autoclavable Pipettes. The stands are convenient to hold up 6 pipettes both of single and multi-channel. Features:

Lightweight, fashion design
Can be rotating smoothly comfortably hold up to 6 pipettes
Comfortably hold up to 6 pipettes

Technical Specifications:

Feature:	Disposable
Application:	Clinical, Household
Material:	Plastic
Certification:	CE
Group:	Adult
Color:	White and Gray

The Aspida is a robust, high specification personal oxygen (O2), carbon dioxide (CO2) or dual (O2 / CO2 combined) monitor which can be worn on a belt or even wall mounted as a backup to a primary safety system.

The Aspida, (Greek for Shield) helps you comply with the regulations, will remind you when maintenance is needed and it safeguards the user from the gas risks.

Technical Specification

Aspida

Operating temperature	-5°C to +50°C
Humidity Range	0 to 99% RH
Display	High-visibility, Organic Light Emitting Diode (OLED) display
Alarm horn	95dB @ 30cm (110dB - man-down alarm)
LED indicators	1 x Green - OK, 1 x Amber - Fault, 1 x Red - Alarm
Internal data log	1 log every 30 seconds for at least 7 days of continuous use
Batteries	2 x NiMH 2100mAh AA batteries (or suitable AA type batteries)
Battery discharge time	15 hours under normal operation (passive atmospheric monitoring, minimal user interaction, no alarms)
Battery lifespan	2 years
Battery charge time	4.5 hours (from flat)
Charge power supply rating	9 V DC - 0.55A
Dimensions	127 x 44 x 90 mm / 5 x 1.7 x 3.5 inches (HxDxW)
Electronics warranty	2 years
IP rating	IP65

Aspida Sensors

CO2 Sensor	O2 Sensor
Sensor type	Analox infrared MIR	Electrochemical
Range	0.01 to 5%	0.1 to 25%
Accuracy (at standard temperature and pressure)	±2% of full scale between 0.01% and 2.5%, ±3%	±3% of full scale between 0.1% and 25%
Response time	T90 <60 seconds	T90 <30 seconds
Sensor life span	5 years	2 year (expected)

Characteristics

Personal Protection

Enriched oxygen (O2) can cause a condition on the human body called hyperoxia, enriched CO2 is highly toxic, both are a threat to life and must be safeguarded against. If an inert gas such as nitrogen (N2), argon (Ar), helium (He) or liquid nitrogen (LN2) leaks then this will deplete the levels of oxygen (O2) in the surrounding area, creating a dangerous atmosphere. The Aspida can offer personal protection and alerts to all of these risks, offering you true peace of mind.

Ideal Solution

Offering audible and visual alarms, data logging and a man down alarm for lone workers, it is an ideal solution to protect staff from the dangers of a leak of carbon dioxide (CO2), oxygen (O2) or inert gas. The Aspida is an affordable, easy to operate gas detection monitor and is perfect for ensuring safety in areas where the gas is piped, used or stored. It operates using rechargeable battery technology allowing it to run for more than 12 hours continuously between charges.

Click here to download User Manual

Click here to download Data Sheet

Download Aspida Software

A Reliable Tool

The ACG+ offers continuous monitoring of up to five different gas variables (oxygen, carbon monoxide, carbon dioxide, volatile organic compounds and water vapor) and simultaneously displays results for testing and calibration purposes. This eliminates potential delays and downtimes while test results are sent out for analysis. The ACG+ has also made cumbersome colorimetric tubes obsolete by drastically reducing the potential for human error in gas analysis. The continuous monitoring also has virtually eliminated the need for time-consuming spot checks. The ACG+ simultaneously scans for O2, CO2, CO, VOCs and water vapor, making it one of the most versatile tools any vessel can utilize. The automatic data log provides additional peace of mind for decision makers.

A Cost Effective Solution

You can’t put a price on safety, reliability and peace of mind. The Analox development team created the ACG+ to combine multiple tasks simultaneously, reducing the need for multiple analyzer units, costly test tubes, and often, extended times in port for repairs. The ACG+ is available in either a fixed location model or convenient portable units. This adaptability provides designers, procurement officers and equipment specialists some options in closed quarter situations.

A Tool, Easy To Install And Maintain

While each ACG+ unit can monitor up to five gasses simultaneously, each analytical system operating in the ACG+ is independent of the others. This means sensors can be replaced individually without needlessly causing downtime.

An Easy Choice

The Analox ACG+ has been proven effective in military situations around the world. The unit’s continuous and specific monitoring capabilities make it an easy choice for key decision-makers.

Technical Specifications

ACG+

Power	24V DC
Optional battery power	NiMH or Li-ION
Optional mains adaptor	Universal input 95 to 250 V AC, 50/60 Hz
IP Rating	IP45
Response Time	T90 <120 seconds T90 <15 minutes H2O sensor
Temperature	Operating: −5 °C to 50 °C / 23°F to 122°F Storage: −10 °C to 60°C / 14°F to 140°F
Flow rate	0.5L per minute (max)
Inlet Pressure	5-10 Bar Gauge (Optional regulator can be purchased)
Humidity	0-99% RH (Non Condensing)
Outputs	1 x normally open relay contacts 1 x normally closed relay contacts 3 x 24 V DC switched output

ACG+ Sensors

O2 Sensor	CO2 Sensor	CO Sensor	VOC Sensor	Water Vapor Sensor
Range	0 to 50%	0 to 1000 ppm	0 to 20 ppm	0 to 100 ppm	0 to 100 mg/m3
Accuracy	±(0.035% O2 + 1% of reading + ±(0.035% O2 + 1% of reading + 0.15% of reading/°C)	±(25 ppm CO2 + 1% of reading + 1 ppm CO2/°C)	±(1 ppm CO + 5% of reading + 0.1 ppm CO/°C)	±(1 ppm VOC + 5% of reading + 0.25% of reading/°C)	±(0.15 mg/m3 H2O + 20% of reading)
Technology	Analox MEC intelligent electrochemical oxygen sensor	Analox 5S3 intelligent NDIR sensor	Analox MEC intelligent electrochemical sensor	Analox MEC intelligent PID sensor	Water vapour sensor using capacitive technology

Click here to download Data Sheet

Click here to download Quick Start Guide

Click here to download User Manual

Weight N/A N/A N/A N/A N/A N/A

Dimensions N/A N/A N/A N/A N/A N/A

Additional information

Click outside to hide the comparison bar

Compare