Digital oil bath PE-4342 (11 L)

Laboratory Digital Oil Bath PE-4342 is intended to handle a wide range of laboratory procedures for industrial, biochemical and scientific research. The instrument is designed for accurate temperature control between ambient +10°С up to 250°С.

Technical specifications: Supply voltage, V - 220±10% Maximum power consumption, W - 1500 Operating temperature range, ambient, °С - + 10 to 250 Temperature accuracy, °С - 0.1 Temperature uniformity, °С - ±1.5 Temperature non-uniformity, °С - ±3.0 Bath volume, L - 11 Inside bath dimension (WхDхH), cm - 30х22х17 Dimension (WхDхH), cm - 55х31х33 Weight, not more than, kg – 18

Operating conditions: Ambient air temperature, °С - 5 to 35 Relative air humidity, % - up to 80 Allowable time of continuous work, hours - unlimited

Scope of delivery: - PE-4342 series Oil Digital Bath - 1 pc - Stainless steel 304 (AISI 304) Lid – 1 pc - Heater cover - 1 pc - Power cable – 1 pc - Data Sheet and Operating Manual - 1 pc

• Rotor capacity: 12 x 1.5/2.0 mL vessels, 2 x PCR strip
• Max. speed: 14,100 x g (14,500 rpm)
• Extremely compact footprint — measures 9”W x 4.”H x 9ó”D!
• Aluminum rotor accommodates twelve 1.5- or 2.0-mL tubes (maximum diameter of 11 mm)
• Rotor can be autoclaved at 121°C for 20 minutes
• Minimal sample heat transfer — maximum of 12°C after 20 minutes at max speed
• Eliminate costly repairs with the low maintenance drive
• Soft-touch lid closure for ergonomic lid locking — and releases automatically at the end of a run

Click Here To Download Catalogue

• Lowest operation and tip ejection forces
• Fully autoclavable
• Ultra light weight with space-age materials
• Secondary adjustment option for various liquid classes
• Spring loaded tip con
• For transferring molecular samples and PCR mix solutions.
• One set is for DNA work and the other for RNA work. Each with the following specs
• Light weight, traditional tip shaft, and will fit all generic brands of tips
• Equal to or better than accuracy and precision compared to ISO 8655, so results can be trusted.
• Easy and quick volume adjustment with or without gloves. Foolproof volume lock prevents accidental volume changes.
• Low maintenance and autoclavable 121° for at least 20 minutes
• Quick release

• Microprocessor control.
• Digital display setting and actual temperature.
• Over temperature alarm, PID self-tuning.
• Digital display running timer.
• Stainless steel interior.
• Electricity leakage protection.
• With glass inner door, With hidden door locks.
• Mechanical overheat protection, cut off the heating sources.
• Automatic alarm after operation.
• Suitable for constant temperature tests.
• Suitable for bacteria cultivation, breeding, ferment.

• Auto zero function: Manual blanking not required
• Dual wavelength measurement system:
• 2 wave lengths 455nm and 575nm
• Plays major role to remove the interference caused due to Hemolysis & turbidity of sample
• LED Light source:
• LED does not require replacement as it lasts longer
• As compared to Lamp, LED are more suitable as there is no intensity fluctuations
• No warm up time required.
• Flexible unit selection:
• Two units either mg/dl or umol/L are selectable, ease of reporting
• Compact slot for Capillary:
• Accuracy of results are directly related to proper alignment of Capillary
• B-111 has the easiest mode to ensure precise values
• Data transfer:
• External device can be connected to instrument through RS232 por
• USB port

• Light source - LED
• Wavelength - 455nm and 575nm
• Net weight - 1kg
• Measuring range - 0-30 mg/dl , 510 umol/L
• Display - 16×2 LCD module with backlight
• Auto calibration - Yes
• Sample type - Serum or plasma
• Sample volume - 40-80μL
• Test time - <5sec
• Units - mg/dl or umol/L
• Dimensions - 150 (W) × 115 (H) × 190 (D) mm
• Interface - RS232
• Reading cuvette - Heparinized micro capillary holder
• Storage temperature - 15-40°c
• Power supply - DC 9V(DC adapter)
• Power consumption - <2W

• Made of high quality PP material with good transparency.
• Applied for Gilson/Finland/Eppendorf Pipettors.
• Carefully inspect of raw material and manufactured under strict process check, all tips are with excellent accuracy and precison.
• Special siliconizing on the inner surface ensure no liquid adhesion and accurate sample transfer.
• Standard tips and filter tips can be autoclaved, high temperature sterilization acceptable.