Electric Pneumatic Tourniquet

~~$0.00~~

Shipped from Abroad

Delivery & Availability:

Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Sku:

SF1033560084-286

Tags:

Description
Reviews (0)

Description

HXY-D01 Electrical manometer shows pneumatic tourniquet using dial display or microcomputer control digital display, the pressure and the time at work is clear, in case of sudden power failure, it keeps the pressure in 2 hours, with pressure leakage automatic compensation function can be set to a constant pressure working value. The working pressure greater than the set pressure of 3kpa(22mmHg), automatic pressure relief to the pressure range, pressure setting in 100kpa(750mmHg) adjusted operation to increase or decrease the pressure value at any time. Slow phase deflation was adopted after the operation, it can prevent cardiovascular and cerebrovascular patients with sudden ischemia. Automatic memory of the last operation parameters for the next operation, or as a basic parameter, saves time. When the working pressure exceeds the range, it has audibled and light alarm prompt and operative time remaining 10 minute,5 minute,1-minute alarm. Standard tourniquet cuff with cotton fabric does not hurt the skin, high strength TPU liner is durable. At the same time, high temperature and high-pressure silicone liner of tourniquet cuff can be optional. The pressure sensor is used to control accuracy.

Configuration	Features	Specification	Packing
1.tourniquet：1 set 2.tourniquet cuff：1 set（small, middle, big） 3.power cable：1 piece 4.fuse：FT1A glassfuse×2, ø5×20, ZH237 5.seal ring：2 pieces 6.operating manual：1 7.certificate of qualification：1	Easy operation and setting Eco-friendly Customized brand available Accurate Dial display pressure Pressure range 0-100kpa Low noise imported components	Machine shell: ABS Initial inflation time: ≤50 seconds Noise: ≤60dB Power waste: ≤25W Voltage:220V/50HZ Pressure range:0-0.1Mpa Time range:0-120min Pressure control accuracy: ±3kpa Relative temperature of working environmernt:4~40℃ Working environment relative humidity: ≤80% Size:302417cm	Covered with PE film and packed in carton delivered with wooden case. Size: 432432CM Net/Gross weight:4/5kg

Reviews

There are no reviews yet.

Be the first to review “Electric Pneumatic Tourniquet”

Quick Comparison

Electric Pneumatic Tourniquet remove DrGem Floor Mounted Analogue X-ray remove ASPEL Stress ECG with Treadmill and Software remove Sonoscape E1 Ultrasound Machine With Two Probes remove ASPEL AsCARD Coral PC Based ECG Machine remove Jade Mobile X-ray machine (Analogue) remove

Name Electric Pneumatic Tourniquet remove DrGem Floor Mounted Analogue X-ray remove ASPEL Stress ECG with Treadmill and Software remove Sonoscape E1 Ultrasound Machine With Two Probes remove ASPEL AsCARD Coral PC Based ECG Machine remove Jade Mobile X-ray machine (Analogue) remove

Image

SKU SF1033560084-286 SF1033560074-6 SF1033560075-2 SF1033560012-20 SF1033560075-11 SF1033560074-2

Rating

Price

~~$0.00~~

$6,542.00

$4,620.00

$486.00

~~$0.00~~

Stock

Availability

Add to cart

Description Shipped from Abroad HXY-D01 Electrical manometer shows pneumatic tourniquet using dial display or microcomputer control digital display, the pressure and the time at work is clear, in case of sudden power failure, it keeps the pressure in 2 hours, with pressure leakage automatic compensation function can be set to a constant pressure working value. Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information. In Stock GXR Analogue X-ray system matches with a radiographic room which perfectly fits your workow and can be easily upgraded to DR system with the help of DR interface and PC interface in GXR generator as well as Bucky suitable to Flat Panel Detector. GXR X-ray system is equipped with a high frequency X-ray generator which consistently produces high quality radiograph in favor of high quality X-ray output with a very small kV ripple and accurate mA and mAs. GXR X-ray system is designed to provide convenience to operator and comfort to patient. Delivery & Availability: Typically 21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information. Shipped from Abroad It is a system with professional tool dedicated to exercise and resting ECG examination. Treadmill has 12 lead ECG modules. With ECG Analyzing Software. Delivery & Availability: Typically 21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information. Shipped from Abroad SonoScape has developed a new probe and function for the E1 Exp. With these additions the E1 Exp will bring users a more efficient examination experience with satisfying image quality and a smooth workflow. Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information. Shipped from Abroad AsCARD Coral electrocardiograph is a 3-, 6-, 12-channel ECG equipped with CardioTEKA software allows transmission of full 12 ECG leads to the user PC through USB interface. It is intended for carrying out ECG examinations in adults and pediatric patients in all types of health care centres. ECG procedures can be performed by qualified personnel only. AsCARD Coral can cooperate also with CardioTEST system as 12-channel ECG device allows transmission of full 12 ECG leads to the user PC through USB interface. Delivery & Availability: Typically 10 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information. In Stock JADE is one of the lightest portable X-ray systems on the market, allowing it to be used in any imaginable way including bedside, operating rooms, intensive care units and in veterinary fields. With a simple, easy-to-use operator console, three-way control, two-step foldable stand and auto lock system, JADE is a user-friendly portable X-ray system. Delivery & Availability: Typically 21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Content

Configuration	Features	Specification	Packing
1.tourniquet：1 set 2.tourniquet cuff：1 set（small, middle, big） 3.power cable：1 piece 4.fuse：FT1A glassfuse×2, ø5×20, ZH237 5.seal ring：2 pieces 6.operating manual：1 7.certificate of qualification：1	Easy operation and setting Eco-friendly Customized brand available Accurate Dial display pressure Pressure range 0-100kpa Low noise imported components	Machine shell: ABS Initial inflation time: ≤50 seconds Noise: ≤60dB Power waste: ≤25W Voltage:220V/50HZ Pressure range:0-0.1Mpa Time range:0-120min Pressure control accuracy: ±3kpa Relative temperature of working environmernt:4~40℃ Working environment relative humidity: ≤80% Size:302417cm	Covered with PE film and packed in carton delivered with wooden case. Size: 432432CM Net/Gross weight:4/5kg

DrGem GXR Floor Mounted Analogue X-ray system matches with a radiographic room which perfectly fits your workflow and can be easily upgraded to DR system with the help of DR interface and PC interface in GXR generator as well as Bucky suitable to Flat Panel Detector. GXR (Analogue X-ray)system is equipped with a high frequency X-ray generator which consistently produces high quality radiograph in favor of high quality X-ray output with a very small kV ripple and accurate mA and mAs. GXR (Analogue X-ray) system is designed to provide convenience to operator and comfort to patient. Features of DrGem GXR Floor Mounted Analogue X-ray:

4 way Tabletop Patient Table (PBT-4) A large tabletop with extended travel enables all radiography studies with minimal patient movement, and supporting patient weight up to 300kg. Fully at tabletop without a frame on the edge makes cleanliness and odors free
Floor Mount Tube Stand (TS-FM6) Floor Rail type tube stand provides all radiography studies with smooth movement on the rail.
Wall Bucky Stand (WBS) Elegant design, durable and easy-to-use Wall Bucky Stand provides full satisfaction.

Technical Specifications of DrGem GXR Floor Mounted Analogue X-ray:

Power Rating - 32KW
Generator - GXR-32S
Rotor - Dual Speed Starter(DSS)
Input Power - 400/480VAC, Three phase
Line Frequency - 50/60Hz
X-ray tube - DXT-12M, (0.6/1.2mm, 300kHU)
Tube Voltage - 40 to 150kV, 1kV Step
Tube Current – 10 to 640mA
Output - 640mA@81kV, 500mA@104kV, 400mA@130kV, 320mA@150kV
Time Range - 1ms to 10s
mAs Range - 0.1 to 800mAs
Reproducibility - Coecient of Variation : kV < 0.005, Time < 0.005,mAs < 0.01
Accuracy - kV < ±(1%+1kV), mA < ±(3%+1mA), Time <±(1%+0.5ms), mAs < ±(3%+0.1mAs)
Linearity - Coecient of Linearity < 0.01 : CL = (X1-X2)/(X1+X2), where X is mR/mAs

Click Here To Download Catalogue

It is a system with professional tool dedicated to exercise and resting ECG examination. Treadmill has 12 lead ECG modules. With ECG Analyzing Software. Technical Specification:

Simultaneous registration and observation of ECG signal from all 12 leads on PC screen,
Automatic measurement of HR, ST level and slope,
Printing and archiving examination report which contains: patient's data, the full disclosure ECG of the whole recording, selected strips, average P-QRS-T complexes, table summary, load value, HR, ST level and slope,
RAMP protocol
PMHR control
Digital filtration of mains disturbances
Digital filtration of muscle origin disturbances
Resting examination: 12, 6 or 3-channel in manual or automatic mode
Automatic regulation of isoelectric line position in the middle of registration channel
Automatic elimination of isoelectric line migration

CardioTEST Software:

excellent quality of ECG waveforms thanks to the use of digital filters eliminating the swimming of the isoelectric line and disruption of muscle origin,
uninterrupted recording and presentation of 12-lead ECG signal, presentation of averaged P-QRS-T units with 12 leads along with the results of ST level and slope measurements,
automatic HR measurement, ST level and ST segment slope,

automatic control of cycloergometer and treadmill load,
archiving and printing of the research report,
automatic determination of measuring points with the possibility of manual correction,
automatic arrhythmia analysis,
presentation of parameters regarding: test phase, current load, stage time and total effort time,
monitored parameters: rhythm rate, MET, double product, blood pressure, level, ST segment slope and load,
real-time ECG printout,
preview of trends of all measured parameters during the test,
alarm system for monitored parameters and arrhythmia,
an option to automatically measure blood pressure,
archiving and printing a report enabling a reliable assessment of the study (such an report contains ECG, average P-QRS-T assemblies and a table with measurement results),
standard test protocols and the ability to define your own protocols also in RAMP mode,
preview the report on the screen before printing the report,
function of reanalysis of the performed test,
presentation of 3D trends illustrating ST segment changes.

Click Here To Download Catalogue

DETAILS Efficient Diagnosis μ-Scan, Speckle Reduction & Edge Enhancement Spatial Compound Imaging PIH - Pure Inversion Harmonic Wide Scan - Enlarged Image Area Tissue-Specific Imaging SR Flow Ergonomic Designs Up to 2 Transducer Ports Light Weight and Compact 15.6 inch Anti-flickering HD LED Screen Tilting Monitor Angle Adjustment Backlit Keyboard and Intelligent Panel Long-lasting Battery for 90 mins Ease of Use Quick Boot Up Auto-Brightness Adjustment Auto Image Optimization Auto IMT Auto Trace Equipped Accessories Wi-Fi and Bluetooth Available DICOM 500GB Hard Disk Height Adjustable Trolley Durable, Carry-on Site Suitcase

Click Here To Download Catalogue

AsCARD Coral electrocardiograph is a 3-, 6-, 12-channel ECG equipped with CardioTEKA software allows transmission of full 12 ECG leads to the user PC through USB interface. It is intended for carrying out ECG examinations in adults and pediatric patients in all types of health care centres. ECG procedures can be performed by qualified personnel only. AsCARD Coral can cooperate also with CardioTEST system as 12-channel ECG device allows transmission of full 12 ECG leads to the user PC through USB interface. Technical Specification:

Number of electrodes: 10
ECG channels: 12
Sampling frequency: 1600 Hz
Transmitted ECG signal resolution: 12 bits
Transmission type: USB 1.1
ECG signal analysis: CardioTEKA Software

Click Here To Download Catalogue

JADE Mobile X-ray machine is one of the lightest portable X-ray systems on the market, allowing it to be used in any imaginable way including bedside, operating rooms, intensive care units and veterinary fields. With a simple, easy-to-use operator console, three-way control, two-step foldable stand and auto-lock system, the JADE Mobile X-ray machine is a user-friendly portable X-ray system. Convenient & Intuitive Operation: JADE is one of the lightest portable X-ray systems on the market, allowing it to be used in any imaginable way including bedside, operating rooms, intensive care units and in veterinary fields. With a simple, easy-to-use operator console, three-way control, two-step foldable stand and auto-lock system, JADE is a user-friendly portable X-ray system. Compact & Powerful Design: JADE Mobile X-ray machine is an innovative, highly versatile portable X-ray system suitable for a variety of clinical uses. Utilizing the unique technology used in DRGEM’s universally recognized X-ray generators, JADE is a compact but powerful unit with a 4kW output and thoughtfully designed components to increase efficiency and maximize workflow. The core part of X-ray source adopts high-quality tube assembly, X-ray collimator and high frequency X-ray generator with excellent performance, lifetime and stability. Features: