PERSONAL CO2/O2 MONITOR-ASPIDA
$0.00
Shipped From Abroad
Key Features
- IP65 rated, ensuring the unit is dust tight and protected against water
- Data logging capability
- Man down alarm
- Time Weighted Average (TWA) monitoring
- Rechargeable batteries
- Intelligent software – up to 2 users registered to one unit
- User changeable alarms
- We recommend: 23.5% for oxygen (O2) enrichment (As per NHS SOPS/EH40/OSHA); 19.5% for oxygen (O2) deficiency 0.5%; & 1.5% for carbon dioxide (CO2) enrichment
Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Description
The Aspida is a robust, high specification personal oxygen (O2), carbon dioxide (CO2) or dual (O2 / CO2 combined) monitor which can be worn on a belt or even wall mounted as a backup to a primary safety system.
The Aspida, (Greek for Shield) helps you comply with the regulations, will remind you when maintenance is needed and it safeguards the user from the gas risks.
Technical Specification
Aspida
| Operating temperature | -5°C to +50°C |
| Humidity Range | 0 to 99% RH |
| Display | High-visibility, Organic Light Emitting Diode (OLED) display |
| Alarm horn | 95dB @ 30cm (110dB – man-down alarm) |
| LED indicators | 1 x Green – OK, 1 x Amber – Fault, 1 x Red – Alarm |
| Internal data log | 1 log every 30 seconds for at least 7 days of continuous use |
| Batteries | 2 x NiMH 2100mAh AA batteries (or suitable AA type batteries) |
| Battery discharge time | 15 hours under normal operation (passive atmospheric monitoring, minimal user interaction, no alarms) |
| Battery lifespan | 2 years |
| Battery charge time | 4.5 hours (from flat) |
| Charge power supply rating | 9 V DC – 0.55A |
| Dimensions | 127 x 44 x 90 mm / 5 x 1.7 x 3.5 inches (HxDxW) |
| Electronics warranty | 2 years |
| IP rating | IP65 |
Aspida Sensors
| CO2 Sensor | O2 Sensor | |
|---|---|---|
| Sensor type | Analox infrared MIR | Electrochemical |
| Range | 0.01 to 5% | 0.1 to 25% |
| Accuracy (at standard temperature and pressure) | ±2% of full scale between 0.01% and 2.5%, ±3% | ±3% of full scale between 0.1% and 25% |
| Response time | T90 <60 seconds | T90 <30 seconds |
| Sensor life span | 5 years | 2 year (expected) |
Characteristics
Personal Protection
Enriched oxygen (O2) can cause a condition on the human body called hyperoxia, enriched CO2 is highly toxic, both are a threat to life and must be safeguarded against.
If an inert gas such as nitrogen (N2), argon (Ar), helium (He) or liquid nitrogen (LN2) leaks then this will deplete the levels of oxygen (O2) in the surrounding area, creating a dangerous atmosphere.
The Aspida can offer personal protection and alerts to all of these risks, offering you true peace of mind.
Ideal Solution
Offering audible and visual alarms, data logging and a man down alarm for lone workers, it is an ideal solution to protect staff from the dangers of a leak of carbon dioxide (CO2), oxygen (O2) or inert gas.
The Aspida is an affordable, easy to operate gas detection monitor and is perfect for ensuring safety in areas where the gas is piped, used or stored.
It operates using rechargeable battery technology allowing it to run for more than 12 hours continuously between charges.
Click here to download User Manual
Click here to download Data Sheet
Download Aspida Software
Quick Comparison
| Settings | PERSONAL CO2/O2 MONITOR-ASPIDA remove | VENUS SOLO OEM SENSOR remove | LIGHTWEIGHT PERSONAL CO2 ALARM remove | PORTABLE OXYGEN MONITOR remove | Sonoscape P20 Ultrasound Machine remove | Pilot-RO Water Purification System remove | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | PERSONAL CO2/O2 MONITOR-ASPIDA remove | VENUS SOLO OEM SENSOR remove | LIGHTWEIGHT PERSONAL CO2 ALARM remove | PORTABLE OXYGEN MONITOR remove | Sonoscape P20 Ultrasound Machine remove | Pilot-RO Water Purification System remove | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Image |  |  |  |  |  |  | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| SKU | SF1033560130141-11 | SF1033560130141-15 | SF1033560130141-10 | SF1033560130141-18 | SF1033560012-9 | SF1033560130126-2 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rating | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Price |
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Stock | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Availability | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Add to cart | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description | Shipped From Abroad
Key Features
Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
| Shipped From Abroad
Key Features
Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
| Shipped From Abroad
Key Features
Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
| Shipped From Abroad
Key Features
Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
| Shipped from Abroad Incorporating innovative technologies, P20’s user-friendly design with a simple operation panel, intuitive user interface and a variety of intelligent auxiliary scanning tools, will significantly improve your daily examination experience. Besides general imaging applications, P20 has entitled with diagnostic 4D technology which has an extraordinary performance in obstetrics and gynecology applications. Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information. | Shipped From Abroad
An economical choice of primary pure water for daily laboratory cleaning , with a water output of 45 - 180 liters per hour, ion retention rate >98%, organic matter retention rate >99% (when MW >200 Daltons), particle and bacteria retention rate >99%, which can meet the requirements of conventional production process water and laboratory utensil cleaning water, and can be used as the inlet water for ultrapure water systems, high-pressure steam sterilizers, environmental test chambers and other instruments.
Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Content | The Aspida is a robust, high specification personal oxygen (O2), carbon dioxide (CO2) or dual (O2 / CO2 combined) monitor which can be worn on a belt or even wall mounted as a backup to a primary safety system. The Aspida, (Greek for Shield) helps you comply with the regulations, will remind you when maintenance is needed and it safeguards the user from the gas risks.Technical SpecificationAspida
CharacteristicsPersonal Protection Enriched oxygen (O2) can cause a condition on the human body called hyperoxia, enriched CO2 is highly toxic, both are a threat to life and must be safeguarded against. If an inert gas such as nitrogen (N2), argon (Ar), helium (He) or liquid nitrogen (LN2) leaks then this will deplete the levels of oxygen (O2) in the surrounding area, creating a dangerous atmosphere. The Aspida can offer personal protection and alerts to all of these risks, offering you true peace of mind.Ideal Solution Offering audible and visual alarms, data logging and a man down alarm for lone workers, it is an ideal solution to protect staff from the dangers of a leak of carbon dioxide (CO2), oxygen (O2) or inert gas. The Aspida is an affordable, easy to operate gas detection monitor and is perfect for ensuring safety in areas where the gas is piped, used or stored. It operates using rechargeable battery technology allowing it to run for more than 12 hours continuously between charges.Click here to download User ManualClick here to download Data SheetDownload Aspida Software | DescriptionThe Venus Solo OEM sensor is a self-contained unit designed for integration into other manufacturers’ equipment and provides a measurement of gas concentration according to specific user requirements. These GFC (Gas Filter Correlation) sensors generate a signal proportional to the infrared absorption of the measured gas. Providing the gas concentration lies within the designed range of the sensor, the signal is periodically compared with a reference gas. Gas concentrations are indicated through the non-linearised analogue signal output. Gas connections to and from the sensor are via suitable fittings on the gas measuring cell. The Venus Solo OEM Series sensors electrical supply is designed to accept 24V DC (3amp max). Our Venus Solo OEM sensor uses GFC (Gas Filter Correlation) technology to give highly accurate gas measurements. The Venus Solo can be integrated into your own gas analyzer or management system and offers the user a 0-2.5v analogue output.The sensor is currently available as either: Carbon dioxide (CO2), carbon monoxide (CO), nitrous oxide (N20), methane (CH4) or nitric oxide (NO). If your application requires a different gas, just let us know and we can customise it to your needs. The Venus Solo is used in Military applications to protect submariners from carbon monoxide (CO) exposure. Technical SpecificationVenus Solo | CO2 MONITORING WITH THE CO2 BUDDYCarbon Dioxide Sensor The CO2BUDDY uses state-of-the-art Non-Dispersive Infrared (NDIR) technology to detect CO2. The NDIR system monitors the air in the surrounding environment for the specific CO2 elements. No additional “control” or “calibration” gasses are needed. The simple-to-operate unit protects users and those nearby by alerting them to CO2 leaks or buildup with multiple alarms – a high visibility LED display, a loud and powerful audible alert and a powerful vibration motor. The vibration setting is ideal for workers in noisy environments where the audible alarms could be drowned out by background noise. Users can customize which alarm setting they prefer. The CO2BUDDY has multiple set-points to comply with the most common safety regulations and jurisdictional requirements, which can be different by country, region, state and municipality. The unit comes with pre-configured alarm set points that meet safety standards across the globe including Europe’s EH40 legislation, OSHA and NIOSH TWA requirements in the United States.Technical SpecificationCO2 BuddyCharacteristicsCalibrate on site Unlike most portable CO2 monitors which require you to send the device back to the manufacturer for calibration, the CO2BUDDY allows you to calibrate on site, all you need is fresh air! Saving you time and money, the CO2BUDDY is perfect for those who like to get the job done.Built for user convenience Very simple to operate, the user can select the pre-configured alarm set points which all feature a TWA (Time Weighted Average) alarm, continuously monitoring the environment over an 8-hour period. The environmentally-friendly CO2BUDDY features a rechargeable battery that can easily last a minimum of 48 hours on a single charge. The unit is designed to be charged overnight or during off-hours, virtually eliminating the need for service returns or battery replacements.Reliable This advanced monitor is also extremely durable, offering long-lasting sensor life and reliable personal monitoring for virtually anyone who may come into contact with CO2 during the course of their day. The CO2BUDDY has been providing an added level of safety and security worldwide since its introduction in 2019. This impressive REVIEW OF CO2BUDDY BY SeetheAir.org provides a fresh perspective of the product’s benefits and specific applications.CO2 exposure While brief exposure to CO2 is common throughout the workday, it’s the potential build-up of the gas from different locations that can often put employees at risk. The CO2BUDDY monitors the average CO2 level over an 8 hour period and will alarm when the overall exposure becomes harmful. Lightweight, portable and highly effective, the CO2BUDDY is one of the smallest and lightest personal CO2 monitors available today. Designed with user comfort and convenience in mind, the unit can be clipped to a shirt pocket, belt or lanyard with little interference with the monitoring process.Tried, tested and Trusted The CO2BUDDY is currently in use worldwide in such diverse industries as food and beverage, hospitality, research laboratories, medical facilities with cryogenic process monitoring, food processing and storage facilities and stadiums. Gas delivery drivers who service many of these industries on a daily basis are key target users of the CO2BUDDY. From initial power up, you must allow a two-hour charge and perform a quick fresh air calibration. Your CO2BUDDY is then ready to protect you!Download Quick Start GuideClick here to download Data Sheet | DescriptionThe O2 Portable is an oxygen monitor designed to provide sample readings from cylinders containing different levels of O2. The O2 Portable is supplied with a sampling adaptor to be easily fitted to cylinders. O2 MONITORING WITH THE O2 PORTABLEEnsuring the oxygen content of a cylinder is correct is vital to ensure the safety of the end user. The O2 Portable provides a fast and accurate reading of O2 levels in that cylinder, easy to use as an instant spot check, the handheld unit is quick and simple to operate, with a robust design.
The O2 Portable has a large digital display and operates from an internal temperature compensated 3 year life (expected) electrochemical oxygen sensor. Power is provided by a 9V, 4000-hour life battery giving up to 3 years of operation before replacement is necessary.
Click to download Data SheetClick here to download User ManualClick here to download Quick Start Guide | DETAILS
Upgraded Images with More Clarity
SonoScape never stops making progress in improving the image quality of its ultrasound products to enhance the confidence of diagnosis for doctors. With extraordinary images provided by P20, the anatomy structures are clearer than ever.
C-Xlasto Imaging
With C-xlasto Imaging, P20 enables comprehensive quantitative elastic analysis. Meanwhile, C-xlasto on P20 is supported by linear, convex and transvaginal probes, to ensure good reproducibility and highly consistent quantitative elastic results.
S-Live
S-Live allows for detailed visualization of subtle anatomical features, thereby enabling intuitive diagnosis with real-time 3D images and enriching patient communication.
Pelvic Floor 4D
Transperineal 4D pelvic floor ultrasound can provide useful clinical values in assessing the vaginal delivery impact on the female anterior compartment, judging whether the pelvic organs are prolapsed or not and the extent, determining if the pelvic muscles were torn accurately.
Anatomic M Mode
Anatomic M Mode helps you observe the myocardial motion at different phases by freely placing sample lines. It accurately measures the myocardial thickness and the heart size of even difficult patients and supports the myocardial function and LV wall-motion assessment.
Tissue Doppler Imaging
P20 is endowed with Tissue Doppler Imaging which provides velocities and other clinical information on myocardial functions, facilitating clinical doctors with the ability to analyze and compare the motions of different parts of the patient's heart.
Click Here To Download Catalogue | An economical choice of primary pure water for daily laboratory cleaning , with a water output of 45 - 180 liters per hour, ion retention rate >98%, organic matter retention rate >99% (when MW >200 Daltons), particle and bacteria retention rate >99%, which can meet the requirements of conventional production process water and laboratory utensil cleaning water, and can be used as the inlet water for ultrapure water systems, high-pressure steam sterilizers, environmental test chambers and other instruments
Technical Parameters
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight | N/A | N/A | N/A | N/A | N/A | N/A | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Additional information | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Reviews
There are no reviews yet.