Smart-RO-Series
/

Smart-RO Water Purification System

Brands: Hi-Tech

$0.00

Shipped From Abroad

An economical choice of primary pure water for daily laboratory cleaning, with an hourly water output of 15-30 liters, ion retention rate >97%, organic matter retention rate >99% (when MW >200 Daltons), particle and bacteria retention rate >99%, which can meet the water requirements for routine laboratory ware cleaning and can be used as the inlet water for ultrapure water systems, high-pressure steam sterilizers, environmental test chambers and other instruments.

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
SF1033560130126-1
Brands:: Hi-Tech

Description

Technical Parameters
Product Model Smart-RO15 Smart-RO30
Pure water output* 15L/Hour 30L/Hour
Instantaneous water output** Up to 2.0L/Min (when there is water in the water tank)
RO reverse osmosis water indicators
 Ion retention rate 97%-99% (when using new RO membrane)
 Organic matter retention rate >99%, when MW>200 Daltons
 Particle and bacteria retention >99%
 bacteria <0.01 cfu/ml (optional (0.45+0.1)μm imported PES terminal filter)
 Particles (>0.2μm) <1/ml (optional (0.45+0.1)μm imported PES terminal filter)
Raw water requirements Urban drinking tap water, water temperature 5-45℃, water pressure 1.0-4.0Kgf/ cm2
Instantaneous water output 2.0L/min (pressure water bucket required)
Water outlet 1: RO reverse osmosis water
Dimensions/weight Length × width × height: 41 × 22 × 42 cm / about 20 kg
Electrical requirements 100-240V, 50/60Hz
power 48W 72W
System Configuration Main unit (including 1 set of purification column) + 15L pressure water bucket + TDS/conductivity test pen + accessory bag
Consumables Information
Part Number/Model Product Name Service life/root (estimated)
PC-M-PP 5μmPP depth filter element About 2-6 months
PC-PP-ZK Zikang PP filter element About 2-6 months*
PC-AC-B-ZK Zikang activated carbon filter About 4-6 months*
PTC-AC-HZS1 Organic matter purification column About 6800 liters of pure water
RO-100GPD 100GPDRO membrane About 1-2 years
RO-200GPD 200GPDRO membrane About 1-2 years
PTC-MBR-K Deionization purification column (imported resin) About 1000 liters of pure water/column
PTC-UPPR-K Ultrapure water column (imported resin) About 1000 liters of pure water/column
TF-(0.45+0.1)μm-S (0.45+0.1)μm imported PES terminal filter –
UF-5000D MWCO5000DUF ultrafiltration component (original imported) –
UV-(185nm&254nm)-10W-K Dual wavelength (185nm & 254nm) UV lamp assembly (imported) –
LAMP-(185nm&254nm)-10W-K Dual wavelength (185 & 254nm) UV lamp (imported) About 9000 hours
UV-254-10W-K 254nmUV ultraviolet lamp assembly (imported lamp tube) –
LAMP-254-10W-K 254nm UV lamp (imported) About 9000 hours

Reviews

There are no reviews yet.

Be the first to review “Smart-RO Water Purification System”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsSmart-RO Water Purification System removePERSONAL CO2/O2 MONITOR-ASPIDA removeVENUS SOLO OEM SENSOR removeSuper-Full Touch Screen Water Purification System removeAtmosphere Protection Module removePORTABLE OXYGEN MONITOR remove
NameSmart-RO Water Purification System removePERSONAL CO2/O2 MONITOR-ASPIDA removeVENUS SOLO OEM SENSOR removeSuper-Full Touch Screen Water Purification System removeAtmosphere Protection Module removePORTABLE OXYGEN MONITOR remove
Image
SKUSF1033560130126-1SF1033560130141-11SF1033560130141-15SF1033560130126-3SF1033560130141-16SF1033560130141-18
Rating
Price

$0.00

$0.00

$0.00

$0.00

$0.00

$0.00

Stock
Availability
Add to cart

Read more

Read more

Read more

Read more

Read more

Read more

DescriptionShipped From Abroad An economical choice of primary pure water for daily laboratory cleaning, with an hourly water output of 15-30 liters, ion retention rate >97%, organic matter retention rate >99% (when MW >200 Daltons), particle and bacteria retention rate >99%, which can meet the water requirements for routine laboratory ware cleaning and can be used as the inlet water for ultrapure water systems, high-pressure steam sterilizers, environmental test chambers and other instruments.
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad
Key Features
  • IP65 rated, ensuring the unit is dust tight and protected against water
  • Data logging capability
  • Man down alarm
  • Time Weighted Average (TWA) monitoring
  • Rechargeable batteries
  • Intelligent software – up to 2 users registered to one unit
  • User changeable alarms
  • We recommend: 23.5% for oxygen (O2) enrichment (As per NHS SOPS/EH40/OSHA); 19.5% for oxygen (O2) deficiency 0.5%; & 1.5% for carbon dioxide (CO2) enrichment
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad
Key Features
  • Single gas (user defined)
  • Backward compatible with ADC’s ‘Eclipse’
  • Linearised Output
  • Continuous status signal to check device health
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad The Super series uses city tap water as the water source, and can easily and quickly produce secondary RO (reverse osmosis) water, EDI deionized water and UP ultrapure water. It uses a standard two-stage reverse osmosis system and Ionpure EDI technology and modules to continuously produce Class II pure water with a TOC of more than 10MΩ.cm (25℃) and <30ppb, and ultrapure water of 18.2MΩ.cm (25℃). System water output: 10 liters/hour, and the daily output of pure water can reach 240 liters.
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad
Key Features
  • Flexible to meet your specific needs and ensures you meet current legislation
  • Measures up to 2 gasses with a choice of; O2 (oxygen), CO2 (carbon dioxide) and R134a (refrigerants). The APM will soon be able to measure VOCs (volatile organic compounds)
  • Uses MODBUS RTU communications protocol
  • Temperature compensated sensors with PressureSync technology
  • Fitted with 2 relays
  • Compatible with the Analox Distributed Atmosphere Monitoring solution (DAMS)
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad
Key Features
  • Fitted with a temperature compensated sensor which offers an expected 3 year life
  • Water and drop resistance, perfect for when using onboard diving trips
  • Compact and robust with minimal maintenance costs
  • Fast and easily transportable
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Content
Technical Parameters
Product Model Smart-RO15 Smart-RO30
Pure water output* 15L/Hour 30L/Hour
Instantaneous water output** Up to 2.0L/Min (when there is water in the water tank)
RO reverse osmosis water indicators
 Ion retention rate 97%-99% (when using new RO membrane)
 Organic matter retention rate >99%, when MW>200 Daltons
 Particle and bacteria retention >99%
 bacteria <0.01 cfu/ml (optional (0.45+0.1)μm imported PES terminal filter)
 Particles (>0.2μm) <1/ml (optional (0.45+0.1)μm imported PES terminal filter)
Raw water requirements Urban drinking tap water, water temperature 5-45℃, water pressure 1.0-4.0Kgf/ cm2
Instantaneous water output 2.0L/min (pressure water bucket required)
Water outlet 1: RO reverse osmosis water
Dimensions/weight Length × width × height: 41 × 22 × 42 cm / about 20 kg
Electrical requirements 100-240V, 50/60Hz
power 48W 72W
System Configuration Main unit (including 1 set of purification column) + 15L pressure water bucket + TDS/conductivity test pen + accessory bag
Consumables Information
Part Number/Model Product Name Service life/root (estimated)
PC-M-PP 5μmPP depth filter element About 2-6 months
PC-PP-ZK Zikang PP filter element About 2-6 months*
PC-AC-B-ZK Zikang activated carbon filter About 4-6 months*
PTC-AC-HZS1 Organic matter purification column About 6800 liters of pure water
RO-100GPD 100GPDRO membrane About 1-2 years
RO-200GPD 200GPDRO membrane About 1-2 years
PTC-MBR-K Deionization purification column (imported resin) About 1000 liters of pure water/column
PTC-UPPR-K Ultrapure water column (imported resin) About 1000 liters of pure water/column
TF-(0.45+0.1)μm-S (0.45+0.1)μm imported PES terminal filter -
UF-5000D MWCO5000DUF ultrafiltration component (original imported) -
UV-(185nm&254nm)-10W-K Dual wavelength (185nm & 254nm) UV lamp assembly (imported) -
LAMP-(185nm&254nm)-10W-K Dual wavelength (185 & 254nm) UV lamp (imported) About 9000 hours
UV-254-10W-K 254nmUV ultraviolet lamp assembly (imported lamp tube) -
LAMP-254-10W-K 254nm UV lamp (imported) About 9000 hours

The Aspida is a robust, high specification personal oxygen (O2), carbon dioxide (CO2) or dual (O2 / CO2 combined) monitor which can be worn on a belt or even wall mounted as a backup to a primary safety system.

The Aspida, (Greek for Shield) helps you comply with the regulations, will remind you when maintenance is needed and it safeguards the user from the gas risks.  
Technical Specification
Aspida
Operating temperature -5°C to +50°C
Humidity Range 0 to 99% RH
Display High-visibility, Organic Light Emitting Diode (OLED) display
Alarm horn 95dB @ 30cm (110dB - man-down alarm)
LED indicators 1 x Green - OK, 1 x Amber - Fault, 1 x Red - Alarm
Internal data log 1 log every 30 seconds for at least 7 days of continuous use
Batteries 2 x NiMH 2100mAh AA batteries (or suitable AA type batteries)
Battery discharge time 15 hours under normal operation (passive atmospheric monitoring, minimal user interaction, no alarms)
Battery lifespan 2 years
Battery charge time 4.5 hours (from flat)
Charge power supply rating 9 V DC - 0.55A
Dimensions 127 x 44 x 90 mm / 5 x 1.7 x 3.5 inches (HxDxW)
Electronics warranty 2 years
IP rating IP65
Aspida Sensors
CO2 Sensor O2 Sensor
Sensor type Analox infrared MIR Electrochemical
Range 0.01 to 5% 0.1 to 25%
Accuracy (at standard temperature and pressure) ±2% of full scale between 0.01% and 2.5%, ±3% ±3% of full scale between 0.1% and 25%
Response time T90 <60 seconds T90 <30 seconds
Sensor life span 5 years 2 year (expected)
Characteristics

Personal Protection

Enriched oxygen (O2) can cause a condition on the human body called hyperoxia, enriched CO2 is highly toxic, both are a threat to life and must be safeguarded against. If an inert gas such as nitrogen (N2), argon (Ar), helium (He) or liquid nitrogen (LN2) leaks then this will deplete the levels of oxygen (O2) in the surrounding area, creating a dangerous atmosphere. The Aspida can offer personal protection and alerts to all of these risks, offering you true peace of mind.  

Ideal Solution

Offering audible and visual alarms, data logging and a man down alarm for lone workers, it is an ideal solution to protect staff from the dangers of a leak of carbon dioxide (CO2), oxygen (O2) or inert gas. The Aspida is an affordable, easy to operate gas detection monitor and is perfect for ensuring safety in areas where the gas is piped, used or stored. It operates using rechargeable battery technology allowing it to run for more than 12 hours continuously between charges.
 
Click here to download User Manual
Click here to download Data Sheet
Download Aspida Software
Description
The Venus Solo OEM sensor is a self-contained unit designed for integration into other manufacturers’ equipment and provides a measurement of gas concentration according to specific user requirements. These GFC (Gas Filter Correlation) sensors generate a signal proportional to the infrared absorption of the measured gas. Providing the gas concentration lies within the designed range of the sensor, the signal is periodically compared with a reference gas. Gas concentrations are indicated through the non-linearised analogue signal output. Gas connections to and from the sensor are via suitable fittings on the gas measuring cell. The Venus Solo OEM Series sensors electrical supply is designed to accept 24V DC (3amp max). Our Venus Solo OEM sensor uses GFC (Gas Filter Correlation) technology to give highly accurate gas measurements. The Venus Solo can be integrated into your own gas analyzer or management system and offers the user a 0-2.5v analogue output.

The sensor is currently available as either: Carbon dioxide (CO2), carbon monoxide (CO), nitrous oxide (N20), methane (CH4) or nitric oxide (NO). If your application requires a different gas, just let us know and we can customise it to your needs. The Venus Solo is used in Military applications to protect submariners from carbon monoxide (CO) exposure.  

Technical Specification
Venus Solo
Operating Temperature Range 5°C to 40°C
Ambient Humidity 0 to 95% RH, non condensing
System Warm-up Time 30-60 minutes (dependant on gas)
Power Requirements 24V DC +/- 10%, Max current 3A, Nominal current 600mA (after warm up)
Outputs 4-20mA, RS232, relays
Response Time (T90) Between 10-90 secs (dependant upon gas cell length) at flow rate of 500ml/minute
Intrinsic Accuracy +/- 0.2% of full scale
Sensor Technology Gas Filter Correlation
Gas PPM Ranges
Gas Type 10 PPM 20 PPM 50 PPM 100 PPM 200 PPM 500 PPM 1000 PPM 2000 PPM 5000 PPM
Carbon Dioxide (CO2) ✓ ✓ ✓ ✓ ✓ ✓
Carbon Monoxide (CO) ✓ ✓ ✓ ✓ ✓ ✓
Methane (CH4) ✓ ✓ ✓ ✓ ✓
Nitrous Oxide (N20) ✓ ✓ ✓ ✓ ✓ ✓ ✓
Gas % Ranges
Gas Type 1% 5% 10% 20% 50% 100%
Carbon Dioxide (CO2) ✓ ✓ ✓ ✓ ✓
Carbon Monoxide (CO) ✓ ✓ ✓ ✓ ✓
Methane (CH4) ✓ ✓ ✓ ✓ ✓ ✓
Nitrous Oxide (N20) ✓ ✓ ✓ ✓ ✓ ✓
Click here to download Data Sheet
Click here to download Operational Manual
Performance characteristics
  • New 7.0-inch color touch screen

The new 7-inch color 16:9 widescreen high-resolution full touch screen control system provides a new fingertip touch operation experience.

  • 4-channel water quality and 3-channel flow monitoring on the host

Source water, secondary RO water, EDI deionized water, UP ultrapure w

  • The lab optimized standard two-stage reverse osmosis system

The use of dual pumps, dual membranes and transition water tanks reduces system energy consumption and wastewater, ensuring stable water quality under different source water conditions.

ater, 4-way water quality online monitoring and water quality exceeding standard alarm function.

1-way source water flow statistics, EDI deionized water and UP ultrapure water 2-way high-precision quantitative water extraction function.

  • Standard-50L PE pure water tank

The polyethylene pure water tank with conical bottom design contains an air filter, which can effectively absorb CO2, organic matter and filter bacteria and particles, and can be equipped with UV ultraviolet irradiation sterilization components.

Features and Advantages
  • Built-in 3-pump system with primary and secondary RO booster pumps and circulation disinfection pumps to achieve complete two-stage reverse osmosis, system circulation and disinfection functions
  • Full-level filter element alarm prompt function based on time and flow, showing the used and remaining life of consumables
  • Automatic detection and alarm functions such as system water shortage alarm, water tank full alarm, water quality exceeding standard alarm, consumable life end alarm, water leakage protection alarm, etc. provide safety guarantee
  • Fully automatic RO membrane anti-scaling flushing program (flushing interval and duration can be set) to extend the service life of the RO membrane
  • Built-in SD card, can store and view operation data charts and curves, and can be inserted into a USB flash drive for complete data export, providing data traceability
  • With USB interface system program upgrade function, and optional WIFI module
  • Built-in perpetual calendar clock, convenient for consumables management and service settings
  • Ultrapure water full pipeline dosing disinfection function, just add disinfection tablets to start the one-key disinfection program to ensure high-quality pure water
  • Ultrapure water circulation function, which can be started and shut down freely to maintain low bacterial contamination level in the system
  • Factory and customer secondary passwords, system parameter settings are all password protected to prevent unauthorized changes
  • Compatible with 2 pure water storage methods of pressure water barrels to meet different application needs
  • High-strength all-engineering plastic chassis, ergonomic design, beautiful appearance, no corrosion and rust, ensure the cleanliness of the machine body, in line with GLP specifications
  • Unique 4-door design, pretreatment, RO and ultra-purification components, EDI and TOC modules, water tanks and control components adopt independent modular structures, making system maintenance more convenient
  • Pipes and joints are NSF certified to minimize TOC precipitation in the system and ensure the highest pure water quality
  • Powerful pre-treatment components, combined with 5μm PP transparent filter, KDF composite filter, coconut shell water-washing grade precision activated carbon filter, effectively protect the RO membrane
  • DOW RO reverse osmosis membrane, RO membrane components optimized by The lab, achieve the combination of long life, stability and high desalination rate of RO membrane
  • The new integrated ultra-purification component of DOW resin ensures that the water produced reaches 18.2MΩ.cm and reduces TOC precipitation
  • Ultra-long life 254&185nm dual wavelength UV lamp, combined with medical grade 316L flow hood, effectively sterilizes, reduces TOC, and enhances the system's application range
  • UF ultrafiltration components, molecular weight cut-off: MWCO5000D, effectively remove pyrogens/endotoxins, can be used for precision cell culture and IVF
  • Double-layer terminal sterilizing filter, accuracy: (0.45+0.1)μm, using PES polyethersulfone composite filter membrane, double-layer filtration design to ensure the terminal effluent is sterile
 
Technical Parameters
name Basic Heat removal prototype Low organic matter type Comprehensive Built-in TOC monitor
model Super 10 Super 10F Super 10V Super 10FV Super-TOC10V Super-TOC 10FV
Pure water output 10 L/hour
Ultrapure water output Up to 2.0L/min (when there is water in the water tank)
Ultrapure water index
Resistivity (25℃) 18.2MΩ.cm
Total Organic Carbon TOC* <10ppb <10ppb <3ppb <3ppb <3ppb <3ppb
bacteria <0.01cfu/ml
Particles (>0.1μm) <1/ml
Pyrogens/endotoxins N/A <0.001Eu/ml N/A <0.001Eu/ml N/A <0.001Eu/ml
RNases N/A <1pg/ml N/A <1pg/ml N/A <1pg/ml
Deoxyribonucleases (DNases) N/A <5pg/ml N/A <5pg/ml N/A <5pg/ml
Pure water index
Resistivity* >5MΩ.cm
Total Organic Carbon (TOC)* <30ppb
Silicon Rejection Rate >99.9%
Source water requirements Urban drinking tap water, water temperature 5-45℃, water pressure 1.0-4.0Kgf/cm2
Size and weight Length × width × height: 545 × 470 × 649 mm, weight: about 35 kg
Electrical requirements 220-240V, 50/60Hz
power 240W
System Configuration Host (including 1 set of purification column) + TOC monitor (TOC type) + 50L PE ultrapure water storage tank
   
Descriptions
The Analox APM (Atmosphere Protection Module) is a configurable modular system which has the ability to monitor up to 2 gasses. This unique solution can be used as a stand alone atmosphere monitor or it can be integrated into existing PMS systems.  
Technical Specifications
System Specifications
Operating Temperature 0°C to +45°C +32°F to +113°F
Operating pressure 700 to 1300mBar
Humidity Range 0 to 95% RH
Power 24vDC (nominal) as standard
Communications MODBUS RTU
Relays 2 as standard
Calibration interval Before mission and / or every 3 months
Sensor Unit
Sensor type Range Danger
CO2 NDIR 0 to 5% / 0 to 30mBar Toxic
O2 (Depleted) Electrochemical 0 to 25% / 0 to 2500mBar Asphyxiation
O2 (enriched) Electrochemical 0 to 25% / 0 to 2500mBar Fire/explosion
R134a NDIR 0 to 1000ppm Asphyxiation
VOCs PID 0 to 20ppm Toxic
Click here to download Data Sheet
Download Pumped Detectors Technical Manual
Description
The O2 Portable is an oxygen monitor designed to provide sample readings from cylinders containing different levels of O2. The O2 Portable is supplied with a sampling adaptor to be easily fitted to cylinders. O2 MONITORING WITH THE O2 PORTABLE

Ensuring the oxygen content of a cylinder is correct is vital to ensure the safety of the end user. The O2 Portable provides a fast and accurate reading of O2 levels in that cylinder, easy to use as an instant spot check, the handheld unit is quick and simple to operate, with a robust design. The O2 Portable has a large digital display and operates from an internal temperature compensated 3 year life (expected) electrochemical oxygen sensor. Power is provided by a 9V, 4000-hour life battery giving up to 3 years of operation before replacement is necessary.  

Technical Specification
O2 PORTABLE
Range 0.1% to 100% in O2
Accuracy ±1% of reading over range 0 to 50% when calibrated on air in accordance with the manual ±2% of reading over range 0 to 100% when calibrated on certified pure oxygen in accordance with the manual
Sensor Warranty 2 years (graded)
Sensor Response <15 seconds to T90
Power 9V Alkaline (PP3)
Operating Temp 5°C to 50°C
Dimensions 64mm x 98mm x 36mm (w x h x d)
Weight 200g
Click to download Data Sheet
Click here to download User Manual
Click here to download Quick Start Guide
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information

Related products

MIR Spirolab Spirometer
Add to cart
Add to wishlist
Accident & Emergency

MIR Spirolab Spirometer

$2,101.00
trtk
Read more
Add to wishlist
Chemistry-Experiments

PORTABLE OXYGEN MONITOR

$0.00
Bistos BT- 740 Patient Monitor
Add to cart
Add to wishlist
Accident & Emergency

Bistos BT- 740 Patient Monitor

$715.00
submk3pnew-787x787
Read more
Add to wishlist
Chemistry-Experiments

DISSUB ANALYSER

$0.00
Fingertip Pulse Oximeter
Add to cart
Add to wishlist
Accident & Emergency

Timesco Jumper Fingertip Pulse Oximeter

$17.00
Oxygen-Concentrator-7F-3-
Add to cart
Add to wishlist
Accident & Emergency

Oxygen Concentrator

$350.00
SUB_ASPIDA_01-2
Read more
Add to wishlist
Health Education

PERSONAL CO2/O2 MONITOR-SUB-ASPIDA

$0.00
Medium-RO
Read more
Add to wishlist
Health Education

Pilot-RO Water Purification System

$0.00
ACG_01_0
Read more
Add to wishlist
Scientific & Medical Education

COMPRESSED BREATHING AIR MONITOR

$0.00
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • Rating
  • Price
  • Description
Click outside to hide the comparison bar
Compare