Emsas ESB10 Water Bath

• The device is used to heat chemicals used in laboratories without being exposed to open flame.
• Glass wool is used as insulation material in the device.
• Since there is no heater or pump in the chamber, there is no loss in net volume.
• The device provides precise temperature measurement thanks to its microprocessor control.
• Additional security measures have been taken against overheating with the safety thermostat that can be adjusted between 30-90 degrees.
• There is a drainage system for the discharge of excess water in the device.
• The inner chamber is made of monoblock stainless steel with rounded corners to reduce the risk of contamination in the device.
• The outer body is stainless steel made of electrostatic painted galvanized sheet.
• The device offers the user the opportunity to program between 0 and 99.99 hours.
• The device provides wide usage opportunity with delayed start and indefinite operating mode.
• Emsaş A.Ş. All medical devices manufactured by us are guaranteed for 2 years.

• Rotor capacity: 12 x 1.5/2.0 mL vessels, 2 x PCR strip
• Max. speed: 14,100 x g (14,500 rpm)
• Extremely compact footprint — measures 9”W x 4.”H x 9ó”D!
• Aluminum rotor accommodates twelve 1.5- or 2.0-mL tubes (maximum diameter of 11 mm)
• Rotor can be autoclaved at 121°C for 20 minutes
• Minimal sample heat transfer — maximum of 12°C after 20 minutes at max speed
• Eliminate costly repairs with the low maintenance drive
• Soft-touch lid closure for ergonomic lid locking — and releases automatically at the end of a run

Click Here To Download Catalogue

• This white coat laboratory coat is a knee-length overcoat/smock is perfect for professionals in the medical field or by those involved in laboratory work.
• This garment is Easy to wash and made from a cotton polyester blend, allowing it to be washed at high temperature and make it easy to see if it is clean.
• Easy to wash.

• Speed: 11,800rpm with 24- place rotor
• RCF: 14,000g with 24-place rotor
• Acceleration: 0-11,800rpm in 60 seconds, with 24-place rotor
• Brake: Automatic
• Noise: 62dB running with 24-place rotor
• Motor: High precision AC/DC series wound motor, brush gear, computer wound coil winding, balance armature and high speed bearings.
• Timer: 0-15 minute timer, graduated in 1 minute increments. Automatic switch at zero
• Weight: 5.1Kg net (without rotor)
• Dimensions: 23.5cm height x 27cm diameter, footprint 16cm diameter
• Construction: Aluminium casing with a steel lid
• Finish: Body cream white baked enamel, with matt black baked enamel lid

Click Here To Download Catalogue

• Observation mode: Brightfield, Polarized Light.
• Head: Binocular, 30° inclined; 360° rotating.
• Eyepiece: WF10x/18 mm, secured by screw.
• Nosepiece: Quadruple ball bearings revolving nosepiece.
• Objectives: – N-PLAN 4x/0.10, with anti-fungus treatment – N-PLAN 10x/0.25 , with anti-fungus treatment – N-PLAN 40x/0.65 , with anti-fungus treatment
• Specimen stage: Rotatable round stage, 120 mm diameter.
• Focusing: Coaxial coarse and fine focusing mechanism with limit stop to prevent the contact between objective and specimen. Adjustable tension of coarse focusing knob.
• Condenser: N.A. 1.25, pre-centered, fixed with iris diaphragm.
• Illumination: X-LED¹ with white 1 W LED and light intensity control.
• Color temperature: 6,300 K. Li-Ion battery for long lasting operation. Multi-plug 100-240Vac/5Vdc external power supply.
• Polarizing filters: Rotating Polarizer (swing-out) and fixed Analyzer (sliding-out).

Click Here To Download Catalogue 

• Color: Blue
• The outer diameter of the lancet: 28G
• Packing: 50 Pieces